2012 Navigation Leather Heated Cooled Trailer Hitch V8 Diesel 134k Miles on 2040-cars

Auto blog

Ford recalling 2015 Mustang for fuel line leak, 20K Transit Connects for plastic panel

Ford is recalling 738 examples of the 2015 2015 Mustang with the 2.3-liter EcoBoost engine – 712 in the US, 16 in Canada. A fuel pressure sensor might have been installed incorrectly on the affected cars, and that could result in a fuel leak. At the time of writing the company hasn't heard any reports of any incidents related to the issue, and parties with affected vehicles can take them to the dealer to have the fuel tube assembly replaced free of charge. The 2014 Transit Connect Cargo Van is also the subject of a safety recall, due to a possible problem with adhesive used on the exterior plastic panel on the sliding doors. There are 19,825 units covered by that recall, which dealers will also repair free of charge. You can find more information on both bulletins in the press releases below. Ford Issues Safety Recall for Certain 2015 Mustang Vehicles in North America for Fuel Pressure Sensor Issue Dec 4, 2014 | DEARBORN, Mich. - Ford is issuing a safety recall for approximately 730 2015 Ford Mustang vehicles in North America (actual 728) for a potential fuel line leak. A fuel pressure sensor, which is part of the fuel supply tube assembly, may have been installed incorrectly, potentially resulting in a pressurized fuel leak. A fuel leak in the presence of an ignition source may result in a fire. Ford is not aware of any fires, accidents or injuries related to this condition. Affected vehicles include certain 2015 Ford Mustangs equipped with 2.3-liter engines built at Flat Rock Assembly Plant, Sept. 25, 2014 to Oct. 9, 2014. Ford is aware of 712 vehicles in the United States and federalized territories and 16 in Canada. These totals are as of Dec. 3, 2014. Dealers will replace the fuel supply tube assembly at no cost to the customer. *** Ford Issues Safety Recall for Certain 2014 Transit Connect Cargo Van Vehicles in North America for Issue with the Plastic Panel on the Sliding Doors Dec 4, 2014 | DEARBORN, Mich. - Ford is issuing a safety recall for approximately 20,000 2014 Transit Connect cargo van vehicles in North America (actual 19,825) for an issue with adhesion of an exterior plastic panel to the sliding doors. This issue may result in noise, a water leak, a loose panel, or separation of the plastic panel from the vehicle while driving, potentially increasing the risk of an accident or injury. Ford is not aware of any accidents or injuries related to this condition.

Ford Mustang hit by Moore' Oklahoma's EF5 tornado lives to do another burnout

Oklahoma recently saw the destructive power of an EF5 tornado, but in the aftermath of the devastation, we've also been witness to the incredible resilience of the human spirit. Moore, OK resident Jack Haden survived the storm but found that his 2003 Ford Mustang wasn't quite as lucky. As you can see in the image above, the tornado's 200+ mph winds did quite a number on the car, but while most people would have likely called their insurance company and scrapped the car, Haden had other plans.
After finding the car and seeing that its V6 still fired up, Haden spent a couple hours getting the car, um... roadworthy(?)... by removing the doors and front clip, cutting off the roof and putting on some new wheels and tires. He noticed that driving it around brought some comic relief to an area that needed a reason to laugh and smile. Check out the KSBI TV news report video below showing before and after pictures of the tough 'Stang, as well as a video showing the newly lightweight coupe doing a smoky burnout.

Ford will add lots of carbon fiber to new vehicles

With BMW receiving a bunch of positive press for its usage of carbon fiber to build its i3 and i8 plug-in vehicles, Ford is jumping into that game as well. The US automaker has reached a manufacturing agreement with Dow Chemical to speed up the use of that material in Blue Oval vehicles. Carbon fiber usage will cut weight from Ford's new products, boosting fuel efficiency as a result. Ford will work with DowAksa, a 50/50 joint venture between Dow Chemical and Turkey-based Aksa Akrilik Kimya Sanayii A.S, on a manufacturing partnership. The goal is to speed up technology research to make it cheaper to make cars and trucks with carbon fiber materials. Ford's light-weighting efforts received a boost of sorts this week when its aluminum-body 2015 F-150 was awarded a five-star Overall Vehicle Score in the National Highway Traffic Safety Administration's testing, making this year's version the safest to date. The new body construction cut 700 pounds from the truck's curb weight. Take a look at Ford's press release about DowAksa below. FORD, DOWAKSA TO JOINTLY DEVELOP CARBON FIBER FOR HIGH-VOLUME AUTOMOTIVE LIGHT-WEIGHTING APPLICATIONS Ford and DowAksa formalize agreement to advance the adoption of cost-effective carbon fiber components through technology validation and proof of concept to reduce vehicle weight and increase fuel efficiency without sacrificing strength Agreement provides pathway for a high-volume manufacturing partnership New joint development agreement accelerates joint research announced in January in partnership under new U.S. composites manufacturing institute Ford and DowAksa today signed a joint development agreement (JDA) to formally advance research on cost-effective, high-volume manufacturing of automotive-grade carbon fiber, a material poised to play a significant role in the drive to make vehicles lighter for greater fuel efficiency, performance and capability. The agreement, between Ford Motor Company, Ford Global Technologies and DowAksa – a 50/50 joint venture between The Dow Chemical Company and Aksa Akrilik Kimya Sanayii A.S – will combine DowAksa's feedstock capacity, carbon fiber conversion and downstream intermediates production capabilities with Ford's expertise in design, engineering and high-volume manufacturing. The goal is to produce materials that make cost-effective carbon fiber composite parts that are much lighter than steel but meet automotive strength requirements.