03 Ford F350 6.0l Turbo Diesel Lariat 4x4 Crew Long Pickup 80pics on 2040-cars

Auto blog

Ford recalling select Taurus, Explorer and Lincoln MKS models over fuel tanks

Ford is recalling certain 2012 Taurus, 2013 Explorer and 2012 Lincoln MKS models over fuel tank concerns. According to the National Highway Traffic Safety Administration, vehicles built between July 19, 2011 and March 15, 2012 may have been built with fuel tanks that have a "marginally sealed seam" on the side. Those seams may not provide the strength necessary to protect the tank from rupture during a collision. They may also leak. The recall covers a total of 3,037 vehicles. NHTSA says that leaked fuel, in the presence of an ignition source, could easily cause a fire.
Dealers will inspect the tanks and replace them as need be free of charge. Owners can expect to be notified once the campaign begins on or around April 22, 2013. You can read the full NHTSA recall notice below for more information.

An in-depth look at the Ford GT with Xcar

Ford made big waves when it unveiled the new GT at the Detroit Auto Show this past January. But as far as details go, it's been rather quiet. Though Dearborn has revealed what engine will sit between those buttresses, it hasn't told us exactly how many horses or torques it will produce, or precisely how fast we should expect it to propel the new all-American supercar. Fortunately, the automaker let the crew at Xcar into the studio to give us a quick, four-minute rundown of all the information that is out there at the moment, along with all the most intriguing angles of the vehicle's design. The historically savvy among us will already know that the new 2016 Ford GT traces its roots back to the GT40 that conquered Le Mans half a century ago, and through the previous Ford GT that debuted a decade ago. Both of those featured V8 engines (supercharged in the latter case) while their modern successor goes with a twin-turbo V6. But as Xcar points out, six cylinders aren't without their precedence in the history of the GT-series Ford supercar: the GT70 rally car of 1970 originally packed a 2.6-liter V6. That engine was later replaced by a 1.6-liter inline-four, which puts another crack in the theory of the eight's hegemony over the history of the series – as does, we'll point out, the Bugatti-like quad-turbo V12 that featured in the GT90 concept of 1995 that sadly never made production. The point is that divergence from V8 tradition shouldn't dissuade anyone from getting excited over the arrival of the new GT, and we're looking forward to seeing what she can do – on and off the track. Related Video:

Shelby GT350R offers first mass-produced carbon fiber wheels

In the world of race engineering, reducing total weight is good, but reducing unsprung weight is flippin' fantastic. That's the reason Ford is pushing the envelope in terms of technology for the Shelby GT350R's wheels. Joining the likes of Koenigsegg in the offering, Ford has teamed with Australian outfit Carbon Revolution to produce the CF rollers en masse for the first time. Destined for the hubs of the new Shelby GT350R, the new hoops weigh just 18 pounds each, versus the 33-lbs weight of a similar aluminum wheel. On top of slashing up to 60 pounds in unsprung weight, there's such a reduction in rotational inertia – 40 percent, versus aluminum wheels – that Ford actually has to recalibrate the magnetic ride control system and springs. Thanks to, we're guessing, scenes of crashed Formula One cars disintegrating and spewing shards of carbon fiber all over the track, Ford seems quite keen to do away with the idea that CF is strong, but brittle. The company conducted extensive shock testing, ramming a wheel into a curb at speed. According to the Blue Oval, the lightweight wheel allowed the suspension to respond so quickly that the impact was "greatly diminished," causing the tester to run the experiment again, thinking there'd been a mistake. After recording brake rotor temperatures of 900 degrees Celsius (over 1,650 degrees Fahrenheit, or well past the point that aluminum or magnesium would melt) during testing, Ford and Carbon Revolution actually redesigned the wheels to "a thermal standard more suitable for motorsports," by adding an "incredibly thin, nearly diamond-hard coating that reliably shields the resin from heat." The same process was used to protect engine turbine blades on the Space Shuttle. While the work by Ford and Carbon Revolution should make GT350R customers excited, the work being done here could have serious implications for performance cars in the future. That's the real takeaway here, and is something that should leave fans of all performance vehicles excited.