Ford F250 Plow Truck on 2040-cars

Auto blog

Ford recalls more than 550,000 trucks and SUVs for various safety issues

Ford announced safety recalls for its current F-150 pickup along with several Ford and Lincoln crossovers early Wednesday. The recalls cover more than 550,000 vehicles and address various safety defects, ranging from a fire hazard to potential loss of braking power.  The most far-reaching of the recalls covers approximately 550,000 examples of the 2015-2018 Ford Edge and 2016-2018 Lincoln MKX, which may have been assembled with defective front brake jounce hoses (also commonly referred to as "flex lines"). These hoses run from fixed points on the chassis to the individual front brake calipers. Defective hoses could potentially rupture, allowing brake fluid to leak and resulting in a loss of braking function. Ford will replace the components in question with revised parts.  The next-largest recall is for roughly 3,000 2020 Lincoln Corsair crossovers. The affected models may have been assembled without proper clearance between their rear suspension springs and toe link brackets. The components could potentially make contact, wearing down the protective coating on the rear coil springs, allowing corrosion to occur over time. This corrosion could eventually lead to a failure of the spring. If this happens while the vehicle is being driven, it could result in a sudden change to the vehicle's handling characteristics, and the spring fragments could potentially cause further damage to the car or surrounding traffic.  Ford says owners will be notified that their Corsairs need to be inspected; if there is not adequate clearance between the rear suspension components, Ford's service technicians will remove material from the toe link bracket to allow for operation without contact.  The final (and by far the smallest) recall is for the 2020 F-150. Some units may have left the factory with the incorrect retention nut on the hot lead to the starter motor. Ford says it can cause increased heat generation or electrical arcing, which could potentially result in a fire. Ford says this issue is limited to just a few hundred examples sold in the United States. Dealers will inspect the vehicles and replace the nut if necessary.       

Uber hopes facilities in Detroit will help shape its autonomous future

Hot off the heels of unleashing its fleet of self-driving vehicles in Pittsburgh, PA, Uber announced plans to open a new facility in the Detroit, MI area, reports Automotive News. The new facility was announced at an event hosted by Society of Automotive Engineers in Detroit, MI. Uber's vice president of global vehicle programs Sherif Marakby revealed the news, reports Automotive News. The facility is meant to help the ride-sharing company collaborate with suppliers and automakers in the area. There's no word on where Uber will build the new facility or how big it will be, as those factors have yet to be determined. Just like Pittsburgh, PA, Detroit, MI could become another testing ground for the ride-sharing company. The latest move to open a facility in the Detroit area comes after Uber offered users in Pittsburgh the chance to ride in one of its autonomous vehicle as it looks to gain vital real-world testing. Uber is utilizing a fleet of modified Ford Fusions. Earlier this year in April, the automaker announced a partnership with Google, Lyft, Uber, and Volvo to develop autonomous cars. A new facility in Detroit would strengthen the partnership and help Uber, as well as Ford put autonomous vehicles on the road faster. Related Video: News Source: Automotive News - sub. req.Image Credit: AOL Green Ford Volvo Transportation Alternatives Technology Emerging Technologies Autonomous Vehicles Detroit Uber taxi Lyft ridesharing facility

Fiat Panda by M-Sport a one-of-a-kind rally car

English racing and engineering firm M-Sport is probably best known for the Bentley Continental GT3 endurance racer and the Ford Fiesta R5 customer rally car. Since building the first of 294 Fiesta R5 Mk. I cars in 2013, the fleet of pint-sized competitors has won a total of more than 950 races. So when a longstanding M-Sport customer asked the company to do something special with a clapped-out, 1990s-era Fiat Panda that would retain the car's Panda-ness but also make it a stonking rally car, M-Sport decided to combine the Italian with the Anglo-American. The result is the Panda by M-Sport, a widened Panda bodyshell lowered atop a Fiesta R5 chassis and engine. Otherwise known as Panda'monium. Or Pandiesta, if you're tipsy. Just fitting the skinny Fiat over the tube-frame chassis meant widening the Panda's body shell by 14.2 inches; that slick grille is actually made of two Panda grilles to gain the required width. That surgery helps maintain the original Panda's silhouette, but more was needed to slide the Fiesta's wider track underneath. More latitudinal stretch was provided by the box-section wheel arches that, up front, flow into a front bumper that is half snowplow. In the longitudinal direction, the Pandiesta's wheelbase is 12.6 inches longer than that of the stock Panda. The Ford's 1.6-liter EcoBoost four-cylinder lives under the hood. It sends nearly 300 horsepower and 332 pound-feet of torque to four Pirelli P Zeros through a five-speed sequential transmission and two custom differentials. The new rear diffuser and single, central exhaust convey the seriousness of the endeavor. Hand-embossed lettering spells "PANDA 4x4" on the rear hatch in case anyone has questions about this having as much capability as the standard Panda 4x4. The interior is all Fiesta R5 save for the Panda-mimicking instrument panel and the co-driver's footrest. The latter is also inscribed with the word "PANDA." Despite the license plate, there's no question of street legality here, or rather illegality. M-Sport says the Panda'monium is ready to do any special stage on tarmac or gravel. Seems this is also the car that launches a new division for customer creations called MS-SV, which is M-Sport Special Vehicles. You can watch M-Sport owner Malcom Wilson take you on tour of the Panda by M-Sport in the video at top, and check out what the finished product can do on a track here.  Related Video: This content is hosted by a third party.