2016 Ford F-250 Platinum on 2040-cars

Auto blog

2015 Ford F-150 shaves 700 pounds, adds 2.7-liter EcoBoost [w/video]

The Ford F-150 is one of the best selling vehicles on the planet. Considering that, one can imagine that when it comes time for a redesign, there are hardly any half measures. For its lucky thirteenth generation, Ford has gone all-in on the single most important vehicle in its portfolio, redesigning it from the ground up.
The big news is the F-150's new, lightweight, Atlas-inspired body. Ninety-three percent of that new body is made from a sort of aluminum alloy not unlike what the US military uses in its M2 Bradley fighting vehicles and Humvees, and it accounts for up to 70 percent of the F-150's 700-pound weight reduction. As a side benefit, the aluminum body should prove more resistant to dents and dings. Built Ford tough, indeed.
If you're wondering where the other 30 percent of that 700-pound weight loss went, 8.5 percent (60 pounds) came from the increased use of high-strength steel (up from 23 percent to 77 percent) in its ladder-box frame. Ford claims this steel is comparable to some of the heavy duty pickups used by its competitors, with a PSI rating of 70,000.

How new car shortages may impact your buying experience

If you want further proof that the auto industry is bouncing back, look no further than the empty lots and forecourts of your local dealership. According to a story by The Wall Street Journal, continued high demand for mainstream cars is overtaxing automakers' ability to produce enough models. Several dealers interviewed for the story are reporting two-week supplies as opposed to the typical two-month allocations.
With sales expected to hit 1.4 million units when August numbers arrive shortly and incentive spending down to its lowest amount since January, these limited supplies are pushing prices even higher. For example, according to the WSJ, the average price of a Ford Fusion is up past $26,000. Unfortunately, it's difficult for manufacturers to increase production quickly. If it invests in its facilities, as many manufacturers have done, it risks wasting cash if growth suddenly slows. At the same time, the momentum gained over the past several years could be short lived if vehicle supplies continue to dwindle. "Manufacturers are in a precarious situation," notes Karl Brauer, a senior director at Kelley Blue Book.
Low interest rates and a wealth of desirable features are also allowing customers to purchase more expensive vehicles while justifying their higher overall price tags, a situation that is compounding supply shortages. Even now, during the annual end-of-summer clearance season, deals on new vehicles are remarkably difficult to come by. According to the report, the Toyota Corolla is in a self-inflicted state of shortage, as Toyota clears out inventory in anticipation of the new 2014 generation arriving in dealers. Ford's supplies should rebound as Fusion production comes on line at its Flat Rock, Michigan factory. The Chevrolet Impala, Honda Odyssey, Civic, and Accord and Subaru Forester are also facing shortages.

Ford recalls 1.3 million Fusions, MKZs: Steering wheels could come off

When driving a car, the steering wheel is only expected to move in a rotational fashion, either clockwise or counter-clockwise. When it moves in some other direction, something is wrong, and when it moves the wrong way enough that it is no longer attached to the steering column, that's a really, really bad thing. And apparently, according to a recall issued by Ford, there are over 1.3 million Ford Fusions and Lincoln MKZs that are at risk of this happening. And at least two accidents and one injury have been attributed to the issue. Ford says the problem is that the steering wheel bolt that keeps the wheel attached to the column might not provide enough torque, resulting in the bolt slowly loosening and working its way off the column. The good news is that the fix is really simple. Ford will install a larger bolt with more threads along with a larger nylon patch to keep it all locked down. The fix is completely free to owners. Cars affected by the recall include 2014 to 2017 Fusions built built at the Flat Rock plant in Michigan between August 6, 2013, and February 29, 2016. Model year 2014-2018 Fusions and MKZs built at the Hermosillo factory in Mexico are also affected. So if you have one of those sedans, please get in touch with your local dealer to have the issue addressed. Related Video: