12 Ford F-250 Superduty 4x4 6.7l Powerstroke Diesel 8" Lift Kit 20" Chrome 37's on 2040-cars

Auto blog

Camaro chief: 'rock-star' 4-cylinder set for Mustang fight

It was inevitable, the 2016 Chevy Camaro had to have a four-cylinder engine. The archrival Ford Mustang packs a spunky 2.3-liter EcoBoost four-banger, and everyone from BMW to Subaru uses four-cylinders to great effect to power their sports cars. Now it's Chevy's turn. Again. The Camaro ran the infamous Iron Duke four-cylinder with 88 to 92 horsepower in the 1980s. It was a fuel-economy play at a time when performance was not a priority. After the 1970s muscle-car era, output even for the V8s didn't top 200 hp again until the mid-'80s. Thankfully for enthusiasts, things have changed dramatically in the last 30 years. The gen six Camaro will offer a 2.0-liter inline four-cylinder with 275 horsepower. It's the standard engine, slotting below the 335-hp V6 and the 455-hp V8. But don't mistake the new I4 for an Iron Duke encore. Camaro chief engineer Al Oppenheiser called it a "rock star" and said cars equipped with it feel lighter than V6 models. The four-cylinder (295 pound-feet at 3,000-4,500 rpm) also summons more torque in quicker fashion than the V6 (284 lb-ft at 5,300 rpm). Chevy expects the Camaro to hit 60 miles per hour in "well under six seconds," according to press materials. The Mustang EcoBoost (310 hp, 320 lb-ft) clocks times in the low to mid five-second range. "We're not doing it just so we have one," Oppenheiser said. "We're not doing it because like in gen three you're forced to do it because of fuel economy. We're doing it because it belongs in the car. It has a distinct character." Speaking with Autoblog recently at the Detroit Grand Prix racecourse on Belle Isle, Oppenheiser said he expects the I4 to attract a younger crowd to the Camaro and will put up stiff competition against the V6 for sales. "I've read blogs where younger folks won't buy a Camaro because it doesn't have a 2.0-liter turbo or a turbocharged four-cylinder," he said. "So we're going to excite them." While we talked a lot about four-cylinder engines, Oppenheiser also elaborated on the V6 (It's pretty damn good, too. We drove it.) and the new Alpha platform that the Camaro borrowed from Cadillac. Here's the rest of our edited conversation. Autoblog: Talk a little bit about the four-cylinder – the first turbo four-cylinder ever for Camaro. Do you have any idea what the take rate's going to be? Al Oppenheiser: I think it's going to surprise a lot of people. It's actually a fun car to drive. It's got a really good balance of turbo noise and exhaust note.

Ford recalls over 680,000 Ford Fusions, Mondeos, and Lincoln MKZs for seat belt pretensioners

Update: We spoke with a Ford representative who said that owners will be notified by mail during the week of January 16 . Dealers will also have the fix available at the same time. Owners can bring in their vehicles to dealers for an evaluation in the mean time. The main text has been updated to reflect this. The Basics: Ford is recalling 680,872 2013-2016 Ford Fusions, 2015-2016 Ford Mondeos, and 2013-2015 Lincoln MKZ s for an issue with front driver-side and passenger-side seat belt pretensioners. The Problem: The seat-belt pretensioners did not have sufficient insulation applied. When the pretensioners are activated, the heat generated can cause the cables connected to the belts to separate, which in turn can prevent the seat belts from effectively restraining the occupant. This can lead to injuries. Injuries/Deaths: Ford reports two accidents and two injuries have occurred that are related to this recall. The fix: A dealer technician will inject an insulation coating around the pretensioner. This should effectively keep the heat away from the cables, ensuring the seat belt will properly restrain the user in a collision. If you own one: Affected owners will be notified by mail on the week of January 16. Dealers will have the fix available that week, and owners will be able to bring in their vehicles for the fix to be implemented free of charge. Related Video:

2017 Ford GT looks resplendent in Liquid Silver and will be built in Ontario

You didn't think we'd let an opportunity to capture another high-res image gallery of our favorite vehicle from the North American International Auto Show pass by, now that it's taking center stage in Chicago, did you? Especially since it's now painted in a brand-new hue? Of course not. And so we're happy to present to you the 2017 Ford GT in Liquid Silver, wearing titanium-tinted racing stripes. It may not be as classically American as the show-stopping blue that debuted with the concept in Detroit, but it's beautiful nonetheless. And, in even better news, we hear that the GT has been confirmed for production at Ford's factory in Markham, Ontario, according to our Canadian friends at CTV News. To recap what we know about the Ford GT – besides the fact that we're in mad, mad love with it, of course – it's beautiful, will be powered by a mid-mounted 3.5-liter twin-turbo V6 with "more than 600 horsepower," it's beautiful, it sends all that power to the rear wheels through a seven-speed dual-clutch gearbox, it's beautiful, blends a carbon fiber monocoque and body panels with aluminum subframes, and it's beautiful. We think it's likely headed for endurance-racing competition, as was the original GT40 that is its spiritual grandfather, and we're sure it will look good doing it. Heck, maybe it'll even win at Le Mans. In any case, check it out in high-res glory below, in multiple color schemes, in both images and video. Related Video: Related Gallery Ford GT Concept: Detroit 2015 View 45 Photos Related Gallery Ford GT View 11 Photos Related Gallery 2017 Ford GT: Chicago 2015 View 30 Photos Image Credit: Live photos copyright 2015 Drew Phillips / AOL Design/Style Plants/Manufacturing Chicago Auto Show Ford Coupe Performance Supercars Videos autoblog black