2014 Ford F150 Xlt on 2040-cars

Auto blog

Ford recalling 2015 Mustang for fuel line leak, 20K Transit Connects for plastic panel

Ford is recalling 738 examples of the 2015 2015 Mustang with the 2.3-liter EcoBoost engine – 712 in the US, 16 in Canada. A fuel pressure sensor might have been installed incorrectly on the affected cars, and that could result in a fuel leak. At the time of writing the company hasn't heard any reports of any incidents related to the issue, and parties with affected vehicles can take them to the dealer to have the fuel tube assembly replaced free of charge. The 2014 Transit Connect Cargo Van is also the subject of a safety recall, due to a possible problem with adhesive used on the exterior plastic panel on the sliding doors. There are 19,825 units covered by that recall, which dealers will also repair free of charge. You can find more information on both bulletins in the press releases below. Ford Issues Safety Recall for Certain 2015 Mustang Vehicles in North America for Fuel Pressure Sensor Issue Dec 4, 2014 | DEARBORN, Mich. - Ford is issuing a safety recall for approximately 730 2015 Ford Mustang vehicles in North America (actual 728) for a potential fuel line leak. A fuel pressure sensor, which is part of the fuel supply tube assembly, may have been installed incorrectly, potentially resulting in a pressurized fuel leak. A fuel leak in the presence of an ignition source may result in a fire. Ford is not aware of any fires, accidents or injuries related to this condition. Affected vehicles include certain 2015 Ford Mustangs equipped with 2.3-liter engines built at Flat Rock Assembly Plant, Sept. 25, 2014 to Oct. 9, 2014. Ford is aware of 712 vehicles in the United States and federalized territories and 16 in Canada. These totals are as of Dec. 3, 2014. Dealers will replace the fuel supply tube assembly at no cost to the customer. *** Ford Issues Safety Recall for Certain 2014 Transit Connect Cargo Van Vehicles in North America for Issue with the Plastic Panel on the Sliding Doors Dec 4, 2014 | DEARBORN, Mich. - Ford is issuing a safety recall for approximately 20,000 2014 Transit Connect cargo van vehicles in North America (actual 19,825) for an issue with adhesion of an exterior plastic panel to the sliding doors. This issue may result in noise, a water leak, a loose panel, or separation of the plastic panel from the vehicle while driving, potentially increasing the risk of an accident or injury. Ford is not aware of any accidents or injuries related to this condition.

Watch as U.S. auto industry springs back to life after lockdown

WARREN, Michigan — The Detroit Three automakers and their suppliers began restarting assembly lines on Monday after a two-month coronavirus lockdown in a slow revival of a sector that employs nearly 1 million people in the United States. On a chilly and damp Monday morning, hundreds of workers at Fiat Chrysler Automobile's (FCA) truck plant in Warren, Michigan, began lining up before 4 a.m. to start the 5 a.m. shift. Signs overhead read: "Let's restart." "I'm a little nervous," said Larry Smith, 53, of New Baltimore, who works on wheel alignment away from the assembly line. "They made all the precautions (and) they've done everything they can to prepare us ... I'm trusting in God." Detroit automakers on Monday said there were no issues with absenteeism as the plants opened. FCA reopened four U.S. assembly plants on Monday, including Warren Truck, on a single shift, as well as four parts plants. The reopening of car plants will be a closely watched test of whether workers across a range of U.S. industries can return to factories in large numbers without a resurgence of infections. General Motors Co, Ford Motor Co and FCA have all been preparing for weeks to reopen their North American factories in a push to restart work in an industry that accounts for about 6% of U.S. economic activity. Investors welcomed the gradual restart, sending GM's shares up more than 9% on Monday. FCA shares rose 7.3%, while Ford's were up 6.7%. Auto companies have redesigned assembly lines and retrained workers in an effort to avoid coronavirus outbreaks that could derail production again. Workers entering factories on Monday were checked by temperature monitors. Face masks or shields are standard protective equipment. Jobs such as installing seat belts that used to require two or more workers to get close together inside a vehicle have been redesigned to keep people a safe distance apart. Plastic screens have been installed along assembly lines to separate workers leaning in to the engine compartments of vehicles. Break areas have been reconfigured to keep workers six feet apart. The Detroit automakers have collaborated with each other and with the United Auto Workers to develop common coronavirus safety practices. Other automakers in the United States are adopting similar safety measures.

Ford builds one-off 50th anniversary Mustang Convertible for charity

At the New York Auto Show this year, Ford revealed a special-edition Mustang to honor the iconic pony car's 50th anniversary. Only 1,964 highly symbolic examples will be made, all of them fixed-roof coupes. But the Blue Oval automaker has just announced that it's also building a single 50 Years edition convertible that it will raffled off for charity.
The first production example of the new Mustang Convertible to roll off the line this fall, this one-off will pack many of the features on the 50 Years coupe, including its white paintjob, chrome trim, aluminum dashboard, two-tone upholstery, contrast stitching, special 19-inch wheels and special-edition badging throughout.
This unique cabrio will also be fitted with a special performance pack including Pirelli PZero rubber, Brembo brakes and a limited-slip differential to help get the 420 horsepower and 390 pound-feet of torque from the 5.0-liter V8 through the six-speed manual transmission and down to the road. It'll also feature a serial plaque with the number 0001 of 0001 and chairman Bill Ford's signature.