2014 Ford F150 Xlt on 2040-cars

Auto blog

1969 Ford GT40 Mk III found roaming the halls in Geneva

The halls of the 2015 Geneva Motor Show are filled with all manner of exotic racing machinery, from the likes Scuderia Cameron Glickenhaus to McLaren. But there's one peculiar bit of history tucked away that we thought you'd be equally interested to see: a 1969 Ford GT40 Mk III. One of only seven known to be built, this Mk III coupe was intended as a road-going alternative to earlier racing-bred GT40 models, like the original Mk I and 427-cubic-inch, Le Mans-dominating Mk II. Due to its street-legal intentions, the Ford GT40 Mk III boasted revised bodywork that allowed for some luggage and new headlights, along with a redesigned interior with left-hand-drive and a shifter in the normal, center position. The Mk III wasn't very popular when it was new in the 1960s, in part because it looked different from other GT40 models and because it was pretty expensive, but that just means it's an awfully rare gem today. Take a look at the piece of history in our high-res image gallery above. Related Video: Featured Gallery 1969 Ford GT40 Mk III: Geneva 2015 View 18 Photos Image Credit: Live photos copyright 2015 Drew Phillips / AOL Geneva Motor Show Ford Automotive History Coupe Racing Vehicles Special and Limited Editions Performance Classics 2015 Geneva Motor Show ford gt40 autoblog black

Ford halves summer shutdown, ramps SUV production

For the third consecutive year, Ford is reducing the length of its summer shutdown for several factories to keep up with high demand for some models. This year, the decision means 40,000 more units of popular trucks and crossovers like the F-Series, Edge, Escape, and Explorer. Rather than the normal two-week break, workers at the Chicago, Dearborn Truck, Kansas City, Kentucky Truck, Louisville, and Oakville factories will only get a week off starting on June 29. Additionally, 10 plants for producing components to support these assembly lines will also have the shorter vacation. The rest of the Blue Oval's manufacturing locations will shutdown from June 29 to July 10 for maintenance and retooling. According to Ford, the decision comes because of low inventories and high demand on some of its popular models. The 2015 F-150 is lasting around 20 days at dealers, and the Edge spends an average of 10 days before being sold. Ford is hardly alone in deciding to keep locations open during the normal summer break, though. FCA recently made the decision not to shutdown four assembly plants and all of its factories for components to keep up with demand for models like the Jeep Cherokee, Grand Cherokee, and Dodge Durango. Related Video: FORD REDUCES SUMMER SHUTDOWN TO MEET DEMAND FOR FORD F-SERIES TRUCKS, EDGE, ESCAPE AND EXPLORER JUN 2, 2015 | DEARBORN, MICH. In response to increased customer demand, Ford will add capacity this summer to produce its most popular trucks and utilities Ford will shorten its summer shutdown from the traditional two-week summer shutdown to one week for a majority of North American assembly plants, increasing production by close to 40,000 units In April, Ford F-150 was turning at just 20 days on dealer lots, Edge sales were up 78 percent, and Escape and Explorer remained in tight supply. 2016 Explorers are now hitting dealer lots In response to customer demand for Ford's newest products, the company this year will produce close to 40,000 extra units by idling select plants for only one week during what has been the traditional two-week summer shutdown.. "To meet surging customer demand for our top-selling trucks and utilities, we are continuing to run our North American facilities during the traditional two-week summer shutdown in order to add close to 40,000 units," said Bruce Hettle, Ford vice president, North America Manufacturing.

Camaro chief: 'rock-star' 4-cylinder set for Mustang fight

It was inevitable, the 2016 Chevy Camaro had to have a four-cylinder engine. The archrival Ford Mustang packs a spunky 2.3-liter EcoBoost four-banger, and everyone from BMW to Subaru uses four-cylinders to great effect to power their sports cars. Now it's Chevy's turn. Again. The Camaro ran the infamous Iron Duke four-cylinder with 88 to 92 horsepower in the 1980s. It was a fuel-economy play at a time when performance was not a priority. After the 1970s muscle-car era, output even for the V8s didn't top 200 hp again until the mid-'80s. Thankfully for enthusiasts, things have changed dramatically in the last 30 years. The gen six Camaro will offer a 2.0-liter inline four-cylinder with 275 horsepower. It's the standard engine, slotting below the 335-hp V6 and the 455-hp V8. But don't mistake the new I4 for an Iron Duke encore. Camaro chief engineer Al Oppenheiser called it a "rock star" and said cars equipped with it feel lighter than V6 models. The four-cylinder (295 pound-feet at 3,000-4,500 rpm) also summons more torque in quicker fashion than the V6 (284 lb-ft at 5,300 rpm). Chevy expects the Camaro to hit 60 miles per hour in "well under six seconds," according to press materials. The Mustang EcoBoost (310 hp, 320 lb-ft) clocks times in the low to mid five-second range. "We're not doing it just so we have one," Oppenheiser said. "We're not doing it because like in gen three you're forced to do it because of fuel economy. We're doing it because it belongs in the car. It has a distinct character." Speaking with Autoblog recently at the Detroit Grand Prix racecourse on Belle Isle, Oppenheiser said he expects the I4 to attract a younger crowd to the Camaro and will put up stiff competition against the V6 for sales. "I've read blogs where younger folks won't buy a Camaro because it doesn't have a 2.0-liter turbo or a turbocharged four-cylinder," he said. "So we're going to excite them." While we talked a lot about four-cylinder engines, Oppenheiser also elaborated on the V6 (It's pretty damn good, too. We drove it.) and the new Alpha platform that the Camaro borrowed from Cadillac. Here's the rest of our edited conversation. Autoblog: Talk a little bit about the four-cylinder – the first turbo four-cylinder ever for Camaro. Do you have any idea what the take rate's going to be? Al Oppenheiser: I think it's going to surprise a lot of people. It's actually a fun car to drive. It's got a really good balance of turbo noise and exhaust note.