2013 Ford F-150 Ltd #638 Ecoboost 4x4 Sunroof Nav 11k! Texas Direct Auto on 2040-cars

Auto blog

Ford recalling 126,000 Fusions and Milans over wheel separation concern

Ford has announced a recall of certain Ford Fusion and Mercury Milan vehicles after an investigation by the National Highway Traffic Safety Administration. A total of 128,616 2010 and 2011 models equipped with steel wheels may have been manufactured with wheel studs that could crack and split over time. If that happens, the vehicle may experience a wheel separation.
According to The Detroit News, the company is aware of a total of 30 wheel separation incidents, one of which occurred on the front of the vehicle. Even so, no injuries have been reported as a result of the defect.
The problem apparently stems from the fact that the mounting pads on the vehicles' steel wheels may have been faulty from the factory. In addition, the wheel mounting face on rear disc brakes may not have been installed properly. Ford will inspect the rear disc face and replace them as necessary. In addition, the company will replace all of the vehicle's wheel studs free of charge. Head to the NHTSA website for more information, and click past the jump to view the full recall notice.

Ford Gets The Aluminum F-150 Ready For Prime Time

Russell Barnett, a Ford dealer in Tennessee, is ready for aluminum. Ford is using the metal almost exclusively in body of the 2015 version of its best-selling F-150 pickup, which starts arriving at dealerships next month. Barnett is already answering customers' questions about the truck. And he's updated his repair shop not only for the F-150, but in anticipation that other Ford brands such as the Mustang will eventually make the switch from steel. But, just in case, he ordered some extra steel-bodied 2014 pickups. "There will be some people who won't want to change for a while," says Barnett, who says pickups make up around half of the annual sales at his dealership in rural Winchester. Ford is doubling down on aluminum, which is lighter - and more expensive - than steel but just as tough. The new truck is the company's response to customers' requests for a more fuel-efficient and nimbler pickup. Fordhopes the advantages outweigh customer doubts about the durability of aluminum or potential repair costs for the pricier metal. It's a big risk. So far this year, one out of every three vehicles Ford sold in the U.S. was an F-Series pickup. Morgan Stanley estimates F-Series trucks account for 90 percent of Ford's global automotive profit. On Tuesday, it kicked off production of the new truck at its Dearborn Truck Plant, four miles from the company's headquarters. "Yeah, this is a risk, but it's one well worth taking." said Bill Ford, the company's executive chairman, as he stood alongside the assembly line. "For our customer, this is a big, big leap forward." The trucks have been the best-selling vehicles in the U.S. for 32 straight years; last year, Ford sold nearly 100,000 more full-size pickups than General Motors. Aluminum isn't new to the auto industry, but this is the first time it will cover the entire body of such a high-volume vehicle. Ford made 647,697 F-150 pickups at its two U.S. plants last year; that's one every 49 seconds. If Ford's bet pays off, it could pad its lead in the lucrative truck market. More importantly, aluminum "future proofs" the truck - and the company - in an era of rising fuel economy standards, says Karl Brauer, a senior analyst with Kelley Blue Book. Ford will announce the truck's fuel economy figures later this month. That could determine if it steals customers away from the Silverado or Ram. Truck buyers are among the most loyal in the auto market.

John Hennessey's personal 2015 HPE700 Supercharged Ford Mustang GT hits 195 mph

Dressed in a coat of menacing black paint, the 2015 Hennessey Performance HPE700 Supercharged Ford Mustang GT definitely looks like one mean muscle machine. The 717-horsepower 'Stang proved that it can back up that aggressive appearance recently when company founder John Hennessey took his personal example to see just how fast it would go. The result down the 1.1-mile straight at the Continental Tires Proving Grounds in Uvalde, Texas, was over 195 miles per hour. The Mustang is nothing but a black blur and wall of supercharger wail as it buzzes by the camera at top speed. Despite the strong result, Hennessey doesn't seem done with the 'Stang yet. The car still seems to be pulling when it hits the rev limiter, and there's some straight track left ahead. After getting out, John Hennessey immediately says he thinks 200 mph is possible. The heart of the HPE700 is a 2.9-liter Roots-Type supercharger running at 7.25 psi. That's a pretty massive blower, especially when considering the 2.4-liter unit on the Hellcat V8. The engine also gets upgrades like improved injectors, a new fuel pump, stainless steel exhaust and recalibrated management. The company claims the upgraded Mustang can hit 60 in around 3.6 seconds and do the quarter-mile in 11.2 seconds at 131 mph. Prices for the package start at $59,500, but this one would would ring up for $65,874. Hennessey Performance is limiting production to 500 of them for the 2015 model year. 2015 HPE700 Supercharged Mustang Rockets to 195.2 mph John Hennessey takes his personal Mustang GT on a Texas road trip Uvalde, Texas-Everything is bigger in Texas, especially when it comes to automotive performance. Texas also lays claim to the highest posted speed limit in America at 85 mph. Enter the team from Hennessey Performance Engineering (HPE) who are located just west of Houston. John Hennessey and his merry band of performance car builders like to go fast, so much so that they have their own 1/4 mile dragstrip next to their workshop. Recently, the Hennessey team wanted to test their 717 horsepower HPE700 Supercharged Mustang development car (John's personal car and occasional daily driver) beyond the 130+ mph speeds that they have seen on the dragstrip. "Thankfully, we had recently received an invitation from the guys at the Continental Tires proving grounds in Uvalde to come over and do some testing on their 8.0 mile high speed oval", said Hennessey.