2007 Ford F150 F-150 Xlt Texas Edition Power Windows Locks Cd Changer Alloys 37k on 2040-cars

Auto blog

Ford offering factory-spec EcoBoost reflashes that don't void warranty*

Buy a supercharger or cold-air kit from Ford Racing and a Performance Calibration handset comes with it to reset the ECU for the upgrade. Now Ford Racing is offering the ProCal handset a la carte for $595, allowing you to reflash the ECU on your EcoBoost-equipped ride to extract more of its inherent capabilities without any additional upgrades. It gives you control of variables such as throttle response, idle speed and turbo wastegate control, among others. As for that warranty asterisk, the press release says enthusiasts can up the power "while maintaining the Ford-backed limited warranty." However Ford Motor Co. and Ford Racing are separate entities, and, best we can tell, when you reflash the ECU, your Ford warranty gets supplanted by the Ford Racing warranty. Say you bought a 2014 Ford, that means your five-year, 60,000-mile warranty becomes Ford Racing's three-year, 36,000-mile warranty, if we're reading the fine print correctly. If you have an older car and have driven more than 36,000 miles, then your warranty options are kaput, at least as far as a Ford in-house option. If have warranty concerns, you might also want to consider having a dealer perform the reflash, or at least ask about it. Once you've got past the small print, what about the numbers? At the moment Ford Racing offers tunes for the 2.0-liter EcoBoost in the Focus ST and the 1.6-liter EcoBoost in the Fiesta ST, and we're told there's a 90-pound-foot boost in torque at the crank after you've pressed the right buttons. Anecdotal evidence from a commenter at Road & Track says he went from 252 horsepower at the flywheel to 254 hp at the wheels, and 272 lb-ft at the flywheel to 354 lb-ft at the wheels, but we can't be sure that his adjustments were within Ford Racing specs. Your mileage, naturally, may vary. What about custom numbers for the 2.3-liter EcoBoost in the 2015 Ford Mustang? They aren't ready yet, but we're told we'll get something by the end of next year. Featured Gallery 2015 Ford Focus ST News Source: Ford, Ford Racing via Car and Driver Aftermarket Ford Technology ecoboost ford focus st ford fiesta st ford racing

Ford highlights new F-650 and F-750 with full-size Tonka show truck [w/videos]

Who among us hasn't been tempted by the prospect of buying a big yellow truck and painting the name Tonka along the side? Well apparently there were some folks over at Ford who were just as tempted, only they actually had the means to make that childhood fantasy a reality in the form of the truck you see here. Revealed at the NTEA Work Truck Show this week in Indianapolis, this Tonka show truck stands nearly 10 feet tall. It's painted bright yellow, just like the one you played with in the sand box (and probably still would given the opportunity and maybe no one else looking) and has a blacked-out nose treatment and special graphics. As you can see, it's also equipped with a working dump bed, and has a truly staggering 33,000-pound gross vehicle weight rating, built to showcase the Blue Oval's new line of medium duty trucks. Of course "medium duty" is a relative term, and the new F-750 is clearly a heavier piece of machinery than the company's own Super Duty pickups, but they're lighter-duty than a proper big rig. The new 2016 Ford F-650 and F-750 are just as tough as the models they replace, but they're now quieter and more comfortable to use. In fact, Ford says its 6.7-liter Power Stroke V8 diesel is now 25-percent quieter inside the cabin at highway speeds, 45-percent quieter at idle and 35-percent quieter standing outside in front of the grille. Ford notes that it's the only medium-duty truck manufacturer that makes its own engines and transmissions. That Power Stroke diesel comes with 270 horsepower and 675 pound-feet of torque as standard, but can be upgraded to 300 hp and 700 lb-ft or all the way up to 330 hp and 725 lb-ft. Commercial buyers will also be able to choose between Regular, Super and Crew Cab models with a straight-frame, dock-height or tractor-towing frames, meaning that whatever it is you've got to haul, chances are high that the new Ford F-650 and F-750 can be set up to get the job done.

Ringbrothers shows off Coyote-powered 1968 Mercury Cougar

We'll openly admit that not every SEMA build is our cup of tea. But this? A tastefully resto-modded 1968 Mercury Cougar with a 460-horsepower Ford Mustang V8? Yeah, this is right in our wheelhouse. Sadly, there was no in-pwerson SEMA show in 2020, so we missed out on gems like this one. SEMA or no SEMA, the aftermarket carries on, and co-owners Jim and Mike Ring of Ringbrothers (get it?) saw no reason to let their time and effort go to waste.  When they're not building wild customs (see: 1,100-horsepower 1972 AMC Javelin AMX) or more subtle showcases (such as this Cougar or their 1971 K5 Chevy Blazer build from 2018), the folks at Ringbrothers crank out factory reproduction parts, whether for old-fashioned restoration or modification purposes. While '60s muscle cars are recurring build subjects for the two, the Cougar was the first of its kind they tackled.  Keeping it in the family, Ringbrothers sourced a Ford 5.0-liter "Coyote" V8 and a 10-Speed Automatic (lifted from an F-150 Raptor, incidentally) for the build. They didn't stop with the driveline, of course. The suspension was overhauled with a little help from DSE and a set of HRE Series C1 C103 Forged 3-Piece wheels were thrown over upgraded brakes.  "We put our heart into each car we build, and this Cougar is no exception," Jim said. "The finished product is mild and classy, yet any enthusiast instantly knows it's not stock. I imagine this is what Mercury designers would have come up with if they were building the Cougar today." "While we couldn't bring the car to the SEMA Show, we hope it can be shown to the public soon," Mike said. "We had never done a Cougar before, so this was a fun build. I love working with new shapes and coming up with new ideas." There's plenty to appreciate about this Cougar apart from the mechanicals, too. The finish is Augusta Green Metallic (courtesy of BASF), which was a factory color in 1968. You may know it by another name: Highland Green. There are a few custom exterior touches, but they're quite subtle and styled to be period-correct. The interior was also restored and updated, and it's where you'll find the only thing we're not fond of: that big, fat truck shifter. Gearbox choices notwithstanding, it's a bit of an eyesore. But considering how gorgeous the rest is, we'll give it a pass.  Related Video: