2007 Ford F-150 Supercab 4x4 Side Steps 18'' Wheels 58k Texas Direct Auto on 2040-cars

Auto blog

Ford Explorer, Jeep Grand Cherokee flunk IIHS passenger-side crash test

The Insurance Institute for Highway Safety (IIHS) has uncovered major safety-related problems while crash testing a number of popular midsize SUVs. Among those that scored an overall rating of "poor," the lowest possible score, are the Ford Explorer and Jeep Grand Cherokee. Both SUVs showed a high risk of injury to a front passenger during the IIHS' passenger-side small overlap front crash test. This test simulates what might happen if a car or SUV strikes an immovable object, like a telephone pole, at 40 mph and with roughly 25-percent of its front width. "Although some vehicles in this group offer very good protection, in other models, the airbags, safety belts and structure showed serious deficiencies," says IIHS chief research officer, David Zuby. "In those SUVs, a front-seat passenger would be at risk of injuries to the head, hip or leg in a right-side small overlap front crash." In the 2018 Ford Explorer, the front of the SUV showed the structure was "seriously compromised" during both driver- and passenger-side small overlap crash testing, according to the IIHS. The lower and upper door hinge pillar showed intrusion levels of 15 and 13 inches, while the door sill itself was pushed inward 6 inches toward the crash test dummy. The IIHS states these results indicate a high probability that a front occupant would suffer injuries to their right hip and lower left leg. The 2018 Jeep Grand Cherokee didn't fare much better. Not only did the Jeep exhibit 10 inches of intrusion at the lower door hinge pillar, the front passenger crash test dummy's head hit the dashboard through the front airbag. Worse still, the side curtain airbag didn't deploy and the front passenger door opened. The IIHS says there is a strong chance this would result in right leg injuries, along with the possibility of a serious head injury. Even vehicles that earned an "acceptable" in the small overlap front crash test showed definite room for improvement. The 2018 Honda Pilot, for example, showed good structural performance during the crash itself. But the front passenger crash test dummy's head slid off the deployed airbag and hit the dashboard hard, indicating a head injury might result in a similar real-world crash scenario. Two other SUVs that scored "acceptable" ratings included the 2018 Nissan Pathfinder and 2018 Toyota Highlander. Scoring top marks of "good," the highest rating, in these IIHS crash tests were the 2018 Volkswagen Atlas, 2018 GMC Acadia, and 2019 Kia Sorento.

Ford will add lots of carbon fiber to new vehicles

With BMW receiving a bunch of positive press for its usage of carbon fiber to build its i3 and i8 plug-in vehicles, Ford is jumping into that game as well. The US automaker has reached a manufacturing agreement with Dow Chemical to speed up the use of that material in Blue Oval vehicles. Carbon fiber usage will cut weight from Ford's new products, boosting fuel efficiency as a result. Ford will work with DowAksa, a 50/50 joint venture between Dow Chemical and Turkey-based Aksa Akrilik Kimya Sanayii A.S, on a manufacturing partnership. The goal is to speed up technology research to make it cheaper to make cars and trucks with carbon fiber materials. Ford's light-weighting efforts received a boost of sorts this week when its aluminum-body 2015 F-150 was awarded a five-star Overall Vehicle Score in the National Highway Traffic Safety Administration's testing, making this year's version the safest to date. The new body construction cut 700 pounds from the truck's curb weight. Take a look at Ford's press release about DowAksa below. FORD, DOWAKSA TO JOINTLY DEVELOP CARBON FIBER FOR HIGH-VOLUME AUTOMOTIVE LIGHT-WEIGHTING APPLICATIONS Ford and DowAksa formalize agreement to advance the adoption of cost-effective carbon fiber components through technology validation and proof of concept to reduce vehicle weight and increase fuel efficiency without sacrificing strength Agreement provides pathway for a high-volume manufacturing partnership New joint development agreement accelerates joint research announced in January in partnership under new U.S. composites manufacturing institute Ford and DowAksa today signed a joint development agreement (JDA) to formally advance research on cost-effective, high-volume manufacturing of automotive-grade carbon fiber, a material poised to play a significant role in the drive to make vehicles lighter for greater fuel efficiency, performance and capability. The agreement, between Ford Motor Company, Ford Global Technologies and DowAksa – a 50/50 joint venture between The Dow Chemical Company and Aksa Akrilik Kimya Sanayii A.S – will combine DowAksa's feedstock capacity, carbon fiber conversion and downstream intermediates production capabilities with Ford's expertise in design, engineering and high-volume manufacturing. The goal is to produce materials that make cost-effective carbon fiber composite parts that are much lighter than steel but meet automotive strength requirements.

RWD Lincolns are coming, fate depends partly on MKZ success

The product portfolio at Lincoln may seem a bit sparse at the moment, but if a report is to be believed, new products are on the way. TheDetroitBureau.com spoke with sources at Lincoln and Ford, who claimed the American premium brand is working on, perhaps more than one, rear-wheel-drive vehicle.
Lincoln would likely platform-share with the next-generation Ford Mustang to develop those RWD offerings in the early going. Moving forward, the report indicates that Lincoln could take the lead on other rear-drive projects in the future. As the RWD architecture continues to take shape, "most or all" of the front-wheel-drive portfolio will also be offered with all-wheel drive as an option, ala Audi.
But wait, there's more! The report also suggests that a replacement for the full-size MKS is on the way, as well as a new Navigator and a luxury crossover based on the current Ford Escape.