2000 Ford F-150 Xlt Extended Cab Pickup 4-door 5.4l on 2040-cars

Auto blog

NHTSA probes 2014 Ford Edge Sport 22-inch alloy wheels

The National Highway Traffic Safety Administration is opening a preliminary evaluation into the 2014 Ford Edge Sport for the possibility its 22-inch wheels could break while on the road. This affects an estimated 20,000 examples of the crossover, according to NHTSA. The case that instigated this evaluation was submitted to NHTSA in November 2014. The driver reported that the front, right corner of the vehicle suddenly dipped, and the Edge went into a field. No one was harmed, but upon investigation, the wheel had broken into two pieces, according to The Detroit News. When this happened, this crossover had been driven an estimated 8,500 miles. NHTSA's preliminary evaluations are meant "to assess the scope, frequency, and safety-related consequences of the alleged defect in the subject vehicles." If a problem is discovered during the investigation, this process can lead to a recall. Ford spokesperson Kelli Felker told Autoblog, "We will cooperate with NHTSA on this investigation, as we always do." INVESTIGATION Subject : Wheel Separation Date Investigation Opened: MAY 20, 2015 Date Investigation Closed: Open NHTSA Action Number: PE15020 Component(s): WHEELS All Products Associated with this Investigation Vehicle Make Model Model Year(s) FORD EDGE 2014 Details Manufacturer: Ford Motor Company SUMMARY: On November 29, 2014, ODI received a complaint (ODI No. 10661278) reporting the sudden failure of an original equipment 22-inch alloy wheel rim that failed on a model year 2014 Ford Edge. The right-front corner of the vehicle suddenly dropped while driving, causing the vehicle to drive off the road and into a field. The right-front wheel rim was found to have broken into two pieces. The owner said that there was no prior warning or wheel related problems with the vehicle. The vehicle had been driven approximately 8,500 miles at the time of the incident. A preliminary evaluation has been opened to assess the scope, frequency and safety-related consequences of the alleged defect in the subject vehicles. Related Video:

2020 Ford Explorer, Lincoln Aviator reportedly facing numerous QC issues

A lengthy report in the Detroit Free Press delves into a range of quality control issues confronting the 2020 Ford Explorer and its luxury platform sibling, the 2020 Lincoln Aviator. Freep says it's been following the issue for two months, tapping various unnamed sources for information on the automaker's unorthodox route to resolution. Seems the problem is Explorers and Aviators leaving the production line at the Chicago Assembly Plant with flaws in areas like the chassis, transmission and suspension, said vehicles trucked to Ford's Flat Rock Assembly Plant (FRAP) outside of Detroit for repair. The estimates range from 10,000 to 18,000 vehicles affected, numbers so high that Ford has sought help from Roush Engineering in nearby Allen Park, and brought workers and managers from other plants in the Midwest to FRAP to get vehicles repaired and shipped to dealers. Ford hasn't shared the nature of the problems with anyone outside the company, including dealers and customers. Freep's sources are said to include workers who have provided photos of certain vehicles and of tents used to house parts at the FRAP repair site. The Explorer chassis allegedly has an unidentified problem that engineers are using X-rays to diagnose, and the transmission is having problems sensing when it's in park or going into park. Both the Explorer and Aviator have come off the line with HVAC units that only blow hot air. And the Aviator's height-adjustable suspension enters failure mode for unknown reasons. These come on top of quotidian mishaps common to every new vehicle, but that are meant to be sorted in pre-production, like missing emblems and trim pieces. They also come on top of a recall in early August issued for the Explorer and Aviator concerning the instrument cluster and parking brake, and another at the end of August over rear seatbacks that could collapse in a crash. An automaker spokesperson told Freep, "Making updates to preproduction models based on all-new platforms as they roll off the assembly line – is standard industry practice." Except these aren't pre-production, these are early production vehicles that paying customers and dealers are waiting for, and some of the affected vehicles have been pulled off dealer lots. Dealers say they are fine waiting for the trucks to get sorted out, and they'd rather have Ford fix the problems before the SUVs go to customers.

Shelby Super Snake returns with 750+ horsepower

If you've been waiting for the ne plus ultra of new Mustangs, we're glad to report that the wait is over, friend. Feast your eyes on the new Shelby Super Snake. Based on the 2015 Ford Mustang GT, the new Super Snake is being offered with over 750 horsepower thanks in no small part to a Ford Performance supercharger. That's even more than the 605 hp in the last Super Snake released in 2007, the new 627-hp Shelby GT, or the 500-plus-hp Shelby GT350 you can order from the factory. Shelby American's latest also packs upgraded Ford Performance suspension components, a Borla exhaust, 20-inch wheels from Weld Racing and coated in Michelin Pilot Super Sport rubber, six-piston Wilwood brakes, and more. Differentiating it visually from lesser pony cars are a carbon-fiber hood and aero kit, blacked-out grille, racing stripes, and special badging inside and out. Inside you'll also find a short-throw shifter and three-gauge instrument pod. The upgrades will set you back $49,995 on top of the price of a donor Mustang GT, and only 300 examples will be built this year. For the first time the Super Snake will be available with either a manual or (heaven forbid) an automatic transmission. Related Video: SHELBY SUPER SNAKE RETURNS WITH 750+ HORSEPOWER MUSCLE CAR BASED ON 2015 FORD MUSTANG GT • The legendary Shelby Super Snake returns for the 2015 Ford Mustang model year • 750+ horsepower option combined with new independent suspension and braking system • The first Super Snake available with an automatic transmission • Production limited to 300 Shelby Super Snakes per model year LAS VEGAS – June 16, 2015 – Shelby American is launching the newest Shelby Mustang to wear the legendary Super Snake badge, which will be based on the 2015 model Ford Mustang GT. With the option of over 750 horsepower, as well as unmatched performance enhancements to the handling, braking and cooling of the Ford Mustang GT, the new Shelby Super Snake continues the lineage of the best-selling and most sought-after Shelby car. Additionally, it will be the first Shelby Super Snake also available with an automatic transmission. There will only be 300 total 2015 model year Shelby Super Snakes built. "When Shelby American introduced the 605 horsepower Super Snake in 2007, the car became an instant sensation," said Joe Conway, CEO of Shelby American and co-CEO of Carroll Shelby International.