1999 Ford F-150 Xlt Extended Cab Pickup 4-door 5.4l 4wd on 2040-cars

Auto blog

NHTSA investigating 250k F-150s for possible power brake failure

The National Highway Traffic Safety Administration is opening a preliminary evaluation into the 2011-2012 Ford F-150 with the 3.5-liter EcoBoost V6 because of potential failure of the power braking assist. If a recall is required, it could affect an estimated 250,000 of the trucks. This investigation is prompted by NHTSA receiving 32 complaints about the electric vacuum assist pump allegedly failing in these trucks, which then causes the power braking assist to stop working. Drivers claim having no warning beforehand. There are also two reports of crashes that are purportedly linked to the problem, but the government agency lists no injuries. According to NHTSA, the issue may be getting worse because 60 percent of these allegations are from the past nine months. A preliminary evaluation doesn't necessarily lead to a recall, though. NHTSA uses them "to assess the cause, scope and frequency of the alleged defect." Ford spokesperson Kelli Felker tells Autoblog: "We will cooperate with NHTSA on this investigation, as we always do." Related Video: INVESTIGATION Subject : Brake Vacuum Pump Failure Date Investigation Opened: JUN 22, 2015 Date Investigation Closed: Open NHTSA Action Number: PE15026 Component(s): SERVICE BRAKES, ELECTRIC , SERVICE BRAKES, HYDRAULIC All Products Associated with this Investigation Vehicle Make Model Model Year(s) FORD F-150 2011-2012 Details Manufacturer: Ford Motor Company SUMMARY: The Office of Defects Investigation (ODI) has identified 32 complaints alleging electric vacuum assist pump failures resulting in loss of brake power assist and increased brake pedal effort in model year (MY) 2011-2012 Ford F-150 full-size pickup trucks equipped with 3.5L GTDI engine. None of the complaints reported any warning indicators to alert the driver of brake power assist loss or the potential of increased stopping distance. Two reports alleged crashes due to increased brake pedal effort required to stop or slow the vehicle. The complaints show an apparent increasing trend, with approximately 60 percent of complaints received within the past nine months. A Preliminary Evaluation has been opened to assess the cause, scope and frequency of the alleged defect.

From Expedition to Navigator: our predictions for Lincoln's SUV

In the midst of all the buzz surrounding the new aluminum Ford Expedition and Expedition Max, we remembered the other large SUV the Ford Motor Company showed last year, the Lincoln Navigator concept. And since the Navigator has historically been built on the Expedition platform, we figured there's no better time to focus some of our predictions for the big Lincoln. First off, let's take a look at design. Having seen the new Expedition, we're fairly confident that the Navigator will look almost exactly like its concept. The strong similarities between two mean the Expedition serves as a preview of what a production Navigator will look like. For example, both vehicles' greenhouses we can see that the shape of the C-pillars are nearly identical. The only difference is that the Expedition's are painted body color, while the Navigator's are painted black. Additionally, the character line running along the top of the doors on both vehicles is roughly the same height. The same goes for the more subtle crease near the bottom of the doors. We also see no reason why Lincoln wouldn't use the full width taillights, fender vent, and grille treatment it used on the concept. Those are all easy design changes to create differentiation, and they're all right inline with the cues set by the Continental. View 15 Photos For powertrain, we're pretty certain the 400-horsepower 3.5-liter EcoBoost V6 previewed on the concept is a certainty now. The Expedition and Expedition Max will be offered with a 3.5-liter EcoBoost as well, so we know it will fit. We expect the Expedition's engine will produce 375 horsepower and 470 lb-ft of torque as it does in the F-150. That's less power than the Navigator concept, but it would be reasonable to make the production Navigator a bit more powerful than its lowly Ford brethren to help justify the increased price tag. Towing capacity will probably be about the same between the Ford and Lincoln, which should be something over 9,000 pounds. The Navigator will probably use the same two-wheel-drive and all-wheel-drive drivetrains, too. Inside is where the Expedition and Navigator will likely differ the most, particularly in seating. The Expedition offers seating for up to eight with an available second-row bench seat, and the Navigator concept had captain's chairs for every row. We're expecting the Navigator will only offer second-row captain's chairs since the cramped third row would be a waste of nice buckets.

UK's Loughborough University improving Ford's 1.0-litre EcoBoost engine

How much does it cost for college students to study zero emissions vehicles? At Loughborough University in the UK, a new Advanced Propulsion Centre (APC) is being built at a cost of a billion pounds ($1.7 billion US). The school has just announce that it will fund a number of grad student positions and is creating a new Chair in Advanced Propulsion Systems, which sounds like a fun job to us. We're weird like that. There will be a total of four professor-type positions in the new Center, including the chair, all focused on teaching students about low-carbon vehicle technologies, specifically electric and hybrid ones. The school is investing 1.5 million pounds ($2.5 million) for the new positions. There is a bigger picture as well, a 26-million pound ($44 million) Advanced Combustion Turbocharged Integrated Variable-valvetrain Engine (ACTIVE) project, which uses funds not only from the school but also from Ford and others. The point of ACTIVE is to study Ford's 1.0-liter EcoBoost engine and "improve further its efficiency and ensure it exceeds 2020 emission regulations." This is already a popular engine for the automaker, and it will need to stay at the bleeding edge of efficiency to remain as important in 2020 as it is today. Loughborough University has been working with automakers on advanced energy technologies for years, for example with Rolls-Royce and fuel cells in 2007 and the Lotus Hotfire engine in 2008. University invests GBP1.5M in advanced propulsion research to advance zero emissions vehicles challenge Loughborough University is investing GBP1.5M over five years in strategic research appointments, inspired by the global challenge to develop the new advanced propulsion technologies required for the move to zero emission vehicles. These appointments reinforce the University's world-class research in low-carbon vehicle technologies, adding new dimensions concerned with electric and hybrid drives. Four appointments will be made, including a Chair in Advanced Propulsion Systems, supported by a number of PhD studentships. The GBP1.5M investment is part of the University's commitment to the recently announced Advanced Propulsion Centre (APC) to support the development of new supply chains for low carbon vehicles. APC is an initiative established by the Automotive Council that will see GBP1 billion of investment from government and industry over the next 10 years.