1998 Ford F-150 on 2040-cars

Auto blog

Ford adding stop-start to all major model lines

Ford has gone all-in on its efforts to offer most of its new vehicles with a fuel-efficient EcoBoost engine, but the automaker is reportedly preparing to take another big step toward improving vehicle efficiency. Automotive News is reporting that Ford will soon expand the availability of start-stop technology, which was first offered - presumably the first non-hybrid vehicle, that is - on the 2013 Fusion (equipped with the 1.6-liter EcoBoost engine) as a $295 option.
The benefit of start-stop is reduced fuel consumption as it shuts the engine off at long stops, and AN quotes Ford as saying that drivers can save more than $1,000 on fuel costs over five years. Despite this, the option hasn't been popular on the Fusion thus far, but it could be more beneficial on bigger vehicles like the F-150. Ford also said that the next-gen Edge, which was previewed in concept form at the LA Auto Show, will be equipped with auto start-stop to help make the EcoBoost engines even more efficient.

Recharge Wrap-up: Ford's "snowtonomous" Fusion Hybrid, Porsche eyes battery makers

Bosch and Panasonic are vying to be the battery supplier for Porsche's electric sports car based on the Mission E concept. While Bosch's costs may be higher, its solution would offer simpler logistics. Panasonic is already well established as a battery maker, providing the packs for the Porsche car's rival, Tesla. "We're in the final stage of making a decision," says Porsche CEO Oliver Blume, declining to comment on specific manufacturers. Neither Bosch nor Panasonic provided comment. Read more from Automotive News. Renault will supply a fleet of 150 Renault Zoe EVs for a smart solar charging project in Utrecht, Netherlands. The project involves the installation of 1,000 EV chargers powered by 10,000 photovoltaic panels. The Renault Zoes would be used as part of a carsharing program powered by the solar chargers. Renault and its partners will also implement a vehicle-to-grid system to provide energy during peak demand from the solar chargers and connected EVs. Read more in the press release from Renault. Ford has been testing an autonomous Fusion Hybrid prototype that is capable of driving itself in snowy conditions. Ford uses 3D mapping to scan the drive route. Its LiDAR laser mapping can even detect single falling snowflakes. It collects and processes up to 600 gigabytes of data per hour, comparing its environment to saved maps, a process that helps establish location more precisely than GPS. In addition to the LiDAR systems, the car is also equipped with cameras and radar to help it navigate. Eventually, the car could even be able to clean off its sensors when it detects loss of performance from ice and dirt. Read more in the press release below. FROM AUTONOMY TO SNOWTONOMY: HOW FORD FUSION HYBRID AUTONOMOUS RESEARCH VEHICLE CAN NAVIGATE IN WINTER DEARBORN, Mich., March 10, 2016 – Driving in snow can be a slippery challenge, with the potential for one blizzardy gust to white-out your field of view – a situation faced by the majority of people in the United States. So if self-driving cars are to become a reality – and they almost certainly will – they must be able to navigate snow-covered roads. In its quest to bring self-driving vehicles to millions of people around the world, Ford reveals six facts about its technology that allows for a car to drive itself in snow. 1. Mapping the way: Ford first creates high-resolution 3D maps using LiDAR technology to scan the area its autonomous vehicle will later drive in the snow.

NHTSA probes 2014 Ford Edge Sport 22-inch alloy wheels

The National Highway Traffic Safety Administration is opening a preliminary evaluation into the 2014 Ford Edge Sport for the possibility its 22-inch wheels could break while on the road. This affects an estimated 20,000 examples of the crossover, according to NHTSA. The case that instigated this evaluation was submitted to NHTSA in November 2014. The driver reported that the front, right corner of the vehicle suddenly dipped, and the Edge went into a field. No one was harmed, but upon investigation, the wheel had broken into two pieces, according to The Detroit News. When this happened, this crossover had been driven an estimated 8,500 miles. NHTSA's preliminary evaluations are meant "to assess the scope, frequency, and safety-related consequences of the alleged defect in the subject vehicles." If a problem is discovered during the investigation, this process can lead to a recall. Ford spokesperson Kelli Felker told Autoblog, "We will cooperate with NHTSA on this investigation, as we always do." INVESTIGATION Subject : Wheel Separation Date Investigation Opened: MAY 20, 2015 Date Investigation Closed: Open NHTSA Action Number: PE15020 Component(s): WHEELS All Products Associated with this Investigation Vehicle Make Model Model Year(s) FORD EDGE 2014 Details Manufacturer: Ford Motor Company SUMMARY: On November 29, 2014, ODI received a complaint (ODI No. 10661278) reporting the sudden failure of an original equipment 22-inch alloy wheel rim that failed on a model year 2014 Ford Edge. The right-front corner of the vehicle suddenly dropped while driving, causing the vehicle to drive off the road and into a field. The right-front wheel rim was found to have broken into two pieces. The owner said that there was no prior warning or wheel related problems with the vehicle. The vehicle had been driven approximately 8,500 miles at the time of the incident. A preliminary evaluation has been opened to assess the scope, frequency and safety-related consequences of the alleged defect in the subject vehicles. Related Video: