1996 Ford F-150 Eddie Bauer 2wd Automatic Rare on 2040-cars

Auto blog

2015 Ford F-150's aluminum body not expected to hurt resale value

A cloud of skepticism has hung over the 2015 Ford F-150 since even before it went on sale. The issue had nothing to do with the truck's capabilities but instead over reservations about the switch to aluminum body panels. The change helped shed about 700 pounds off the scales, but the lighter metal also came with the potential for higher repair costs. Edmunds even recently whacked its pickup with a hammer just to find out how much it would cost. However, this might not be a problem, because the latest calculations indicate resale value for the new F-150 is on the rise. The residual experts at ALG estimate that the 2015 F-150 is going to hold 58 percent of its value over the next three years, versus 52 percent for the 2014 model, according to Bloomberg. That figure also gives the Ford the highest forecasted resale value among American fullsize pickups. The 2015 Toyota Tundra leads the segment by holding 63 percent. Meanwhile, the 2015 Chevrolet Silverado and GMC Sierra both come in with 51 percent, and the Ram 1500 holds 46 percent. Finally, the 2015 Nissan Titan comes in at 42 percent. The researchers believe that the improvement in fuel economy for the 2015 F-150 at up to 26 miles per gallon highway offsets higher body repair costs. "We are giving credit for the aluminum construction in the fuel efficiency we're seeing," Eric Lyman, ALG vice president of industry insights, said to Bloomberg. "We are not putting in a negative adjustment for concerns around repair costs or durability associated with aluminum." Ford has long-been preparing for the switch to aluminum. The company purposefully designed the body sections to make repairs easier, and it also partially subsidized dealers' investments for new equipment to do the work. Related Video:

Ford preparing camera-based Front Lighting System

Ford's European Research and Innovation Center in Aachen, Germany is in pre-development on two new lighting technologies that Ford expects to be available "in the near-term." The Camera-Based Advanced Front Lighting System uses GPS and a video camera in the rear-view mirror housing to move the adaptive headlights with the road terrain. When the car detects a roundabout or an intersection, for instance, the light beam widens to offer a bigger view of what's coming from the side. If GPS detected the intersection, the location is tagged so that the beam automatically widens when it is encountered again. The Spot Lighting system uses an infrared camera behind the grille, and is similar to but less complex than systems employed by Mercedes-Benz and Audi. When the infrared camera detects a potential hazard like a person or an animal in or near the road up to 390 feet ahead, it can shine one of two LED spotlights on the danger. A display in the dash cluster will highlight the object with a yellow or a red box, depending on the how close it is and how dangerous it might be. Even though there are only two spotlights, mounted next to the fog lights on the lower front bumper, the system can detect up to eight objects at a time. Don't expect to see these features come to the US, though. Our regulations remain opposed to such headlight trickery, so until that changes, Ford says it's focusing these developments on the European and Asian markets. The video above shows how it works, the press release below has more details. FORD DEVELOPING ADVANCED HEADLIGHTS THAT POINT OUT PEOPLE, ANIMALS IN THE DARK, AND WIDEN BEAMS AT TRICKY JUNCTIONS - Ford is developing advanced lighting technology that enables drivers to more easily see potential hazards when driving at night - Camera-Based Advanced Front Lighting System widens beam at junctions and roundabouts after interpreting traffic signs - GPS-enabled system uses forward-facing camera to remember roadways and direct lighting to help drivers better see bends in the road – effectively lighting the way home on previously travelled routes - Spot Lighting uses infra-red camera to detect pedestrians, cyclists, and animals, and highlight the potential hazards; system can detect up to eight potential hazards and highlight two highest priorities using specially designed headlights and on-screen display AACHEN, Germany, July 17, 2015 – Driving at night, particularly on unlit roads, can be a nerve-wracking experience.

Ford EcoBoost V6 hits the dyno before hitting the track

Ford Racing just unveiled the Riley Daytona Prototype that will make its racing in the United SportsCar Racing Championship Rolex 24 at Daytona in January, and now it has released a video showing development of twin-turbo 3.5-liter EcoBoost V6 that powers the car. Using the same block and heads that can be found on a production Ford Taurus SHO, this new racecar benefits from the collaboration between Ford Racing and Ford powertrain engineers.
While we still don't know what kind of power this engine is putting out, it has definitely gotten a workout at Ford's 17G dyno. This area deep within Ford allows the automaker's racing program to work hand-in-hand with production engine programs, which can be a benefit to racing operations and production cars alike. Scroll down to hear a few people from Ford talk about the crosspollination between its racing and engine teams and watch the EcoBoost get red hot on the dyno.