1978 Ford F-100 Truck 460 Bb Engine, 24" Rims, New Paint/interior, Digital Dash on 2040-cars

Auto blog

Shelby GT350R offers first mass-produced carbon fiber wheels

In the world of race engineering, reducing total weight is good, but reducing unsprung weight is flippin' fantastic. That's the reason Ford is pushing the envelope in terms of technology for the Shelby GT350R's wheels. Joining the likes of Koenigsegg in the offering, Ford has teamed with Australian outfit Carbon Revolution to produce the CF rollers en masse for the first time. Destined for the hubs of the new Shelby GT350R, the new hoops weigh just 18 pounds each, versus the 33-lbs weight of a similar aluminum wheel. On top of slashing up to 60 pounds in unsprung weight, there's such a reduction in rotational inertia – 40 percent, versus aluminum wheels – that Ford actually has to recalibrate the magnetic ride control system and springs. Thanks to, we're guessing, scenes of crashed Formula One cars disintegrating and spewing shards of carbon fiber all over the track, Ford seems quite keen to do away with the idea that CF is strong, but brittle. The company conducted extensive shock testing, ramming a wheel into a curb at speed. According to the Blue Oval, the lightweight wheel allowed the suspension to respond so quickly that the impact was "greatly diminished," causing the tester to run the experiment again, thinking there'd been a mistake. After recording brake rotor temperatures of 900 degrees Celsius (over 1,650 degrees Fahrenheit, or well past the point that aluminum or magnesium would melt) during testing, Ford and Carbon Revolution actually redesigned the wheels to "a thermal standard more suitable for motorsports," by adding an "incredibly thin, nearly diamond-hard coating that reliably shields the resin from heat." The same process was used to protect engine turbine blades on the Space Shuttle. While the work by Ford and Carbon Revolution should make GT350R customers excited, the work being done here could have serious implications for performance cars in the future. That's the real takeaway here, and is something that should leave fans of all performance vehicles excited.

Chevy, GMC and Ram dealers are worried they'll run out of new pickups

One of the unexpected side effects of the ongoing coronavirus pandemic is a shortage of pickups at Chevrolet, GMC and Ram dealers. Supplies are running out, and the factories that build these trucks remain closed. Stores across the nation began increasing incentives in March, when the first stay-at-home orders were issued, in a bid to continue luring buyers into showrooms. They also launched online sales channels, or expanded their existing digital business. Sales nonetheless plummeted in April 2020, but in-demand vehicles, like the Ram 1500 and the Chevrolet Silverado, are still selling relatively well thanks in part to the aforementioned incentives. Pickups outsold sedans for the first time in April 2020, according to The Detroit News, by 17,000 units. The problem is that General Motors, Fiat Chrysler Automobiles (FCA), and Ford temporarily closed their factories in March. "The pipeline is very dry," said Mike Maroone, the CEO of a large dealership group named Maroone USA, in an interview with Automotive News. He told the publication his Chevrolet stores are sitting on a 30-day supply of the Silverado, which is one of America's best-selling vehicles. "That is a problem for us," he concluded. Coronavirus-related lockdowns and factory closures compound problems already faced by dealerships who represent General Motors-owned brands. They entered 2020 with a thinner inventory than a year earlier due to the 40-day United Auto Workers (UAW) strike that paralyzed the company late in 2019, and the 0%, 84-month offers announced in March have sapped supply. Ram wasn't affected by a strike, but it has relied heavily on generous incentives to move trucks off lots. Ford, on the other hand, limited incentives to 2019 models. Inventory levels differ greatly from region to region. The national average for the Silverado stood at an 82-day supply in March 2020, down from 120 in March 2019. Ram stores had a 114-day supply of the 1500 (compared to 134 a year earlier), while Ford bucked that trend with a 111-day supply versus 84 in 2019. Don't panic if you're in the market for a truck; we're not facing a complete drought. Automotive News added that America's light-duty pickup inventory could fall to 400,000 units by the end of May, and drop further to 260,000 units in June. For context, there were about 700,000 light-duty trucks in stock in May and June of 2019. That's unquestionably a sharp drop, but there will still be over a quarter of a million trucks to choose from.

Landau yachts: The history of Lincoln's Designer Series

The Lincoln Designer Series was introduced in 1976, at the end of the imposing Mark IV Continental generation. Four big-name fashion designers of the era – all-American country clubber Bill Blass, psychedelic Italian pattern-maestro Emilio Pucci, venerable French jewelry-maker Cartier, and a la mode French fashionista Hubert de Givenchy – were asked to slather their elegance on LincolnÂ’s personal luxury coupe. This experiment was a wild success. According to documents uncovered in the Lincoln archives – with the incomparable guidance of official brand historian Ted Ryan – the Designer series “accounted for more than 27% of Mark IV sales” shortly after its introduction. It was such a runaway hit, that it continued on throughout the even larger Mark V generation (incidentally, the longest coupe ever produced by Ford Motor Company), and didnÂ’t really peter out on these big two-doors until the early 1990s.   But the true history of the series well predates the era of opera windows, crushed velour and wire wheel covers. “If you take a step back even further, when Ford purchased Lincoln in 1922, Edsel Ford was put in charge of the company. But more than that, he helped establish the first design studio at Ford,” said Ryan. The basic Model T didnÂ’t take much design. Lincoln was different. Edsel is famed for his quote. “Father wanted to make the most popular car, I wanted to make the best.” The specific genesis of the Designer Series, however, came along as a result of a long-term personal connection with the marqueÂ’s first chairman. “Edsel Ford had a relationship with Cartier, and correspondence going throughout the 1920s and '30s,” Ryan said. “His personal cards and stationery were always ordered from Cartier.” This enduring link wasnÂ’t formalized until the late 1960s. “I found in product development files, in 1967, that Ford had gone to Cartier for a special 1970 Cartier Continental coupe,” Ryan said. According to internal documents, this package would include unique interior leather/cloth/vinyl surfaces and trim, modified dials, and a Cartier jewelry box, as well as golden plating on the steering wheel ornament, dial face ornaments, keys, C-pillar ornaments, door monograms, and dashboard plaque. “Think of that. A car that never was, that could have been,” Ryan said, wistfully. Some Cartier magic did get glossed on Lincolns in the late 1960s.