1962 Ford F100 Unibody Short Bed Swb F-100 Project on 2040-cars

Auto blog

Ford recalling 12,300 2015 F-150 pickups

Ford is recalling 12,300 of its new 2015 F-150 pickup trucks in North America. According to the automaker, an upper l-shaft may have been riveted improperly on these trucks, which can cause it to separate. If that happens, drivers may lose steering control without warning. Yikes. The affected trucks were built at Ford's Kansas City Assembly Plant between March 21 and 25, as well as the Dearborn Truck Plant between March 21 and 30. There are 12,328 total trucks included in this recall – 8,963 in the United States, 3,348 in Canada, and 17 in Mexico. Only 5,606 of the trucks are in customers' hands, the rest have yet to be sold. Ford is not aware of any accidents or injuries related to this problem, but knows of one incident where steering control was lost, and believes it to be related to this issue. Scroll down for Ford's official statement. Related Video: FORD ISSUES SAFETY RECALL FOR CERTAIN 2015 FORD F-150 VEHICLES IN NORTH AMERICA FOR UPPER I-SHAFT RIVET ISSUE Ford Motor Company is issuing a safety recall for approximately 12,300 2015-model Ford F-150 vehicles in North America for an upper I-shaft that might have been riveted improperly, potentially causing it to separate. If that happens, it could result in the loss of steering control without warning, increasing the risk of a crash. Ford is not aware of any accidents or injuries, but is aware of one report of loss of steering believed to be related to this condition. Affected vehicles include certain 2015 F-150 vehicles built at Kansas City Assembly Plant from March 19, 2015 to March 21, 2015 and certain 2015 F-150 vehicles built at Dearborn Truck Plant from March 21, 2015 to March 30, 2015. There are 12,328 vehicles that might be affected in North America, including 8,963 in the United States and federalized territories, 3,348 in Canada and 17 in Mexico. Of those, 6,722 vehicles are unsold, meaning 5,606 vehicles are in customer's hands. Dealers will inspect the upper I-shaft assembly and replace it if necessary at no cost to the customer.

Michigan ponders its automotive future in the connected age

Few people take cars more seriously than Michiganders. I've been to the home of BMW in Germany. I've been to Kia's HQ in Korea. I've seen Honda's goods in Japan. No one, from the factory worker to the executive in her pinstriped suit, is more obsessed with cars than Michigan Inc. That's why it was interesting this week to see the state have a moment of introspection four hours north of the Motor City on a scenic island called Mackinac. Ironically, cars are not allowed here. Normally a tourist trap, it played placed host to the Mackinac Public Policy conference this week. While politics took center stage ( I may be the only person here not considering a run for governor) the evolution of the industry through connectivity and data was a theme of the conference. If you're reading this in New York, Silicon Valley, or one of the automotive heartlands listed above, you do care about this. If Michigan rethinks its approach to the car business – and makes moves to become more competitive – that affects you the consumer and enthusiast. It's jobs. It's technology, and it's a competition to see who's going to be the leader. More than a century after Henry Ford made mass production a thing, more than 70 years after Detroit's Arsenal of Democracy helped win World War II, and nearly a decade after the historic bankruptcies of General Motors and Chrysler, the car business is on solid footing again and looking to the future. What's next? Michigan is still home to thousands of auto workers, tech centers (including gleaming facilities built by Toyota and Hyundai), and the headquarters of the three American carmakers. Just because the economy is good doesn't mean it's a given connected cars and mobility advancements are going to come from this state. A lot of it's not. Tesla, Uber, Lyft, Faraday Future, and other transportation mediums have spouted up other places. Michigan leaders and Detroit's carmakers understand this reality. Reflecting on the past means admitting the future is not a given, a key undertone this week in Mackinac. It's about using existing resources, like skilled labor, to move forward. "We do have the number of technicians and technical expertise here in this state," says Stephen Polk," conference chair and former CEO of auto data firm R.L. Polk & Co. To that end, Ford is placing increased emphasis on a division called Smart Mobility, which is an in-house unit focusing on autonomy, connectivity, and forward-looking ideas.

Want a V8 on the cheap? Buy a work truck

In case you didn't notice, V8 cars have gotten pretty expensive. If you want a modern muscle car like the Dodge Challenger R/T, Ford Mustang GT, or Chevy Camaro SS, you'll need between $34,000 and $38,000 for a stripped out example of one. The cheapest of those is the Challenger, and the priciest is the Camaro. These are also the cheapest V8 cars the companies offer. But if you absolutely have to have a V8 for less, there is an option, work trucks. As it turns out, all of the Big Three offer their most basic work trucks with V8s. And because they're so basic, they're pretty affordable, especially when sticking with the standard two-wheel drive. A Ram 1500 Tradesman with a V8 can be had for as little as $29,840, which is a little more than $4,000 less than a Challenger R/T. For a bit more at $30,275, you can have a Chevy Silverado W/T, almost $8,000 less than a Camaro SS. The most expensive is the V8 Ford F-150 starts at a starting price of $30,670, which is a bit over $5,000 less than the Mustang. Of course you'll be in an ultra bare bones vehicle with few comforts, and the price will go up if you add stuff, but we're bargain hunting here, and sacrifices are sometimes necessary. Besides, what you lose in comfort, you gain in loads of cargo space and towing (try to look at the bright side). Also, as a side note, all three trucks are available with optional electronic locking rear differentials. At the discounted price of these trucks, you still get a heaping helping of power. The most potent of the trio is the Ram 1500 Tradesman with 395 horsepower and 410 pound-feet of torque generated by a 5.7-liter V8. Compared with the Challenger R/T, the Ram is up by 20 horsepower and they're tied for torque. The value proposition is even more stark between the two vehicles when looking at the price per horsepower. Each pony in the Ram costs $75.54, while the Challenger charges you $90.91. The Challenger is also more expensive per horsepower than its close competitors. The F-150's 5.0-liter V8 is just barely behind the Ram with 395 horsepower and 400 pound-feet of torque. That's still more power than the Challenger, and it matches the torque of the 2017 Mustang GT. On the down side, it still would be down 20 horsepower on that same 2017 Mustang, and it's behind by 60 horsepower and 20 pound-feet on the new 2018 Mustang GT. The F-150 also just edges out the Mustang in the dollar per horsepower measure.