2012 Ford Explorer Xlt / 4x4 / Heated Leather / Sync / 3 Row Seating / Warranty on 2040-cars

Auto blog

UPDATE: GM, Ford, FCA, Honda shutting down all North America plants

Following an earlier report that General Motors, Ford and FCA would take action to curtail the potential spread of the Coronavirus, news comes today that the three American automakers will instead close all North American plants for an unknown period of time. Ford said in a statement that it "is temporarily suspending production at its manufacturing sites in North America to March 30 to thoroughly clean its facilities to protect its workforce and boost containment efforts for the COVID-19 Coronavirus." General Motors followed with a statement confirming that its suspension "will last until at least March 30," and adding that the situation will be reevaluated from week to week after that. FCA has not yet issued an official statement. Rory Gamble, president of the United Auto Workers union, praised the news. "This will give us time to review best practices and to prevent the spread of this disease," Gamble said in a statement. According to the Associated Press, around 150,000 workers are "likely to receive supplemental pay in addition to unemployment benefits." The United Auto Workers had asked the automakers to reconsider their position on Wednesday, a day after the parties agreed to slow production at U.S. plants and limit the number of workers on the job at one time to prevent the spread of the virus, a source who asked not to be identified told Reuters. The UAW’s new request for the closure of the Detroit Three automakersÂ’ U.S. plants came after Honda said on Wednesday it was temporarily shutting its North American plants for six days because of the anticipated decline in consumer demand. Plants/Manufacturing UAW/Unions Chrysler Fiat Ford GM coronavirus

2020 Ford Escape, Lincoln Corsair ace crash tests, earn Top Safety Pick from IIHS

The redesigned 2020 Ford Escape and its platform-mate, the 2020 Lincoln Corsair, have both just completed their bout of crash tests at the hands of the Insurance Institute for Highway Safety, and while they did not emerge unscathed, they did come away with the agency's Top Safety Pick Award. One caveat: The rating only applies to the Escape equipped with the available LED headlights, which were deemed Acceptable. Similarly, the Corsair needs the available curve-adaptive LED headlights, also rated Acceptable, in order to achieve Top Safety Pick. The Escape's standard halogen headlights scored only a Marginal rating, while the Corsair's base LED headlights were deemed Poor due to glare. Those low headlight ratings knock the vehicles out of contention for Top Safety Pick. Had either vehicle offered headlights able to achieve a Good rating, that would have been enough to get them the agency's Top Safety Pick+ rating. Outside of their headlights, the 2020 Escape and Corsair acquitted themselves well. The Escape saw a big improvement in the difficult small-overlap front crash test, going from a Poor result in the previous generation to Good with the new one. The Corsair performed identically, and both achieved Good ratings in all six crash tests. The IIHS also tests automatic emergency-braking systems, and the standard and optional systems in the Escape and the Corsair both earned Superior ratings.

NHTSA investigating Ford's solution to May 2014 power steering recall

The National Highway Traffic Safety Administration is investigating a complaint that Ford's response to a May 2014 recall of the 2008 to 2011 Ford Escape and Mercury Mariner doesn't quite go far enough to solve a troubling power-steering problem. Roughly a year ago, Ford recalled nearly a million vehicles after it was found that a problem with the torque sensor's communication with the power steering control module could cut steering assistance for drivers. While manual steering would still be available, the problem was enough to ask drivers to report in to have the PSCM inspected, and if necessary, replaced (along with the torque sensor, or in dramatic cases, the entire steering column). That would only happen, though, if trouble codes were being thrown. If there weren't any problems, dealers were told to simply update the PSCM's software so that any issues between it and the torque sensor would simply throw a visual and audio warning – power steering would still be maintained. The petitioner claimed that following the recall work, he still experienced a problem with the torque sensor. According to NHTSA, a claim was made that Ford didn't go far enough in its solution to the problem, and that "the software update itself may in fact cause further issues with the affected vehicle's power steering, causing it to fail, and ultimately requiring replacement of the torque sensor or entire steering column." The petition was filed in early February and is now officially being looked into by NHTSA.