2007 Ford Expedition El Eddie Bauer 4x4,navigation,dvd,clean Title on 2040-cars

Auto blog

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.

8 automakers, 15 utilities collaborate on open smart-charging for EVs

We're going to lead with General Motors here. GM is one of eight automakers working with 15 utilities and the Electric Power Research Institute (EPRI) at developing a "smart" plug-in vehicle charging system. Why did we start with GM? Because it's the first automaker whose press release we read that mentioned the other seven automakers. Points for sharing. For the record, the collaboration also includes BMW, Toyota, Mercedes-Benz, Honda, Chrysler, Mitsubishi and Ford. The utilities include DTE Energy, Duke Energy, Southern California Edison and Pacific Gas & Electric. The idea is to develop a so-called "demand charging" system in which an integrated system lets the plug-ins and utilities communicate with each other so that vehicle charging is cut back at peak hours, when energy is most expensive, and ramped up when the rates drop. Such entities say there's a sense of urgency to develop such a system because the number of plug-in vehicles on US roads totals more than 225,000 today and is climbing steadily. There's a lot of technology involved, obviously, but the goal is to have an open platform that's compatible with virtually any automaker's plug-in vehicle. No timeframe was disclosed for when such a system could go live but you can find a press release from EPRI below. EPRI, Utilities, Auto Manufacturers to Create an Open Grid Integration Platform for Plug-in Electric Vehicles PALO ALTO, Calif. (July 29, 2014) – The Electric Power Research Institute, 8 automakers and 15 utilities are working to develop and demonstrate an open platform that would integrate plug-in electric vehicles (PEV) with smart grid technologies enabling utilities to support PEV charging regardless of location. The platform will allow manufacturers to offer a customer-friendly interface through which PEV drivers can more easily participate in utility PEV programs, such as rates for off-peak or nighttime charging. The portal for the system would be a utility's communications system and an electric vehicle's telematics system. As the electric grid evolves with smarter functionality, electric vehicles can serve as a distributed energy resource to support grid reliability, stability and efficiency. With more than 225,000 plug-in vehicles on U.S. roads -- and their numbers growing -- they are likely to play a significant role in electricity demand side management.

Weekly Recap: Hackers demonstrate auto industry's vulnerability

There's always been a certain risk associated with driving, and this week cyber security came into focus as the latest danger zone when researchers demonstrated how easily they could hack into a 2014 Jeep Cherokee from across the country. The incident raised concerns over the vulnerability of today's cars, many of which double as smartphones and hot spots. During the now-infamous experiment, Chris Valasek and Charlie Miller infiltrated the Jeep's cellular connection and were able to control the infotainment system, brakes, and other functions. The hackers told the Jeep's maker, FCA US, of their findings last year, the company devised a software fix. Though Valesek and Miller hacked a Cherokee (like the one shown above), several FCA products, including recent versions of the Ram, Grand Cherokee, Dodge Durango, and Viper were also affected, illustrating potentially wide exposure that could reverberate across the sector. "For the auto industry, this is a very important event and shows that cyber-security protection is needed even sooner than previously planned," Egil Juliussen, senior analyst and research director for IHS Automotive, wrote in a research note. "Five years ago, the auto industry did not consider cyber security as a near-term problem. This view has changed." Hours after the Cherokee hacking incident was publicized on Tuesday, Sens. Ed Markey (D-Mass) and Richard Blumenthal (D-Conn) introduced legislation to direct the National Highway Traffic Safety Administration and Federal Trade Commission to establish national standards for automotive cyber security. The bill also would require vehicles to have a cyber-rating system to alert consumers how well their cars' privacy and security are defended. "Drivers shouldn't have to choose between being connected and being protected," Markey said in a statement. "We need clear rules of the road that protect cars from hackers and American families from data trackers." Though FCA and its Jeep Cherokee were in the spotlight this time, they were just the latest to showcase how automotive technology has advanced faster than safety and regulatory measures. IHS forecasts 82.5 million cars will be connected to the internet by 2022, which is more than three times today's level. "Cyber-security will become a major challenge for the auto industry and solutions are long overdue," Juliussen said.