2001 Ford Excursion Limited Sport Utility 4-door 7.3l on 2040-cars

Auto blog

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.

Ford recalling nearly 700k Escape CUVs, C-Max hybrids over two separate safety issues

Poor Escape. Ever since its launch in 2012, Ford's small CUV has been the subject of many, many, many recalls. And today, The Detroit News is reporting that Ford is adding two more recalls to the 2013-14 model year Escape's permanent record, one of them also involves the C-Max hybrid hatchback.
The first recall, covering 692,500 Escape and C-Max vehicles, is due to a software glitch that could cause the airbags - specifically, the safety canopy - to not deploy in a timely fashion during rollover crashes. According to the News, Ford says no crashes or injuries have been reported in relation to this problem.
The second recall, covering 692,700 Escapes, is related to the door handles. The News reports that the exterior door handles could open while the vehicle is in motion, and could also fail to latch properly. Once again, no crashes or injuries have occurred because of this. The National Highway Safety Traffic Administration has not issued an official notice on either recall as of this writing.

Ford to cease Australian automaking operations after 90 years

Ford began manufacturing cars in Australia in 1925 with the Model T. In 2016, Ford will stop manufacturing cars Down Under, including the Falcon and the Territory SUV. Ford Australia CEO Bob Graziano has reportedly confirmed the closure of the company's Broadmeadows assembly plant and the Geelong engine plant, both in the state of Victoria. There will be 650 jobs lost at Broadmeadows, 510 sacrificed at Geelong. Of the roughly 3,000 workers the Blue Oval has in Australia, it's said it will try to retain about 1,000 of them at its R&D and product development facilities.
The writing hasn't just been on the wall, it's been a regular item in all the papers and on Ford's bottom line for years. As recently as 2003, Ford sold nearly 75,000 Falcons, but over the next four years, annual sales dropped by something like 10,000 units, and over the last two years, it has sold less than 20,000 per year. It isn't only Ford that has suffered - sales of the other large, locally produced sedan, the Holden Commodore, have also gone over the precipice, triggering the same kind of angst about Holden's continued existence. Ford is the smallest of Australia's local automakers, Holden and Toyota the others, and has posted losses of $AUD141 million last year ($136M US) and $AUD600 million ($580M US) in the past five years. Graziano said the cost of manufacturing is simply too expensive in the country, twice as high as Europe and three times as high as Asia, and there no way to make a business case for staying in the country.
In January 2012, Ford Australia announced it would stay in the country until at least 2016, but by July of the same year, most outside observers were quietly declaring that 2016 would be the last year of Ford Down Under, and even the speculation was making other observers nervous. Ford received money from the Victorian government last year to aid its refresh of the Falcon and Territory, which will continue on schedule for the 2014 model year. A front- and all-wheel-drive sedan on a global platform is predicted to replace the Falcon, with some other SUV expected to replace the Territory. The company says it still intends to expand its lineup in the country.