2014 Ford Escape Se on 2040-cars

Auto blog

A cool boost to turbocharger performance

Since the advent of the forced-induction engine, we have been looking for ways to get every drop of performance we can. There are many approaches to getting additional power using better intercooling, water injection, or even adding nitrous oxide. One take on a short instant burst of power is being researched by Mahle and involves providing supercooled air to an engine, which allows it to burn a leaner fuel mixture and produce more power. The supercooling idea is not new and was examined by Ford in 1993 on the Mustang Mach III concept car, then brought up again in 2003 with the SVT F-150 Lightning concept. Ford called its system the SuperCooler; it was designed to work with any turbocharged or supercharged engine equipped with a water-to-air intercooler. The system on the Lightning concept used a small tank of antifreeze that was hooked up to the truck air conditioning compressor. The air conditioning compressor cooled the antifreeze down to about 30 degrees. The other side of the tank was hooked up to the air-to-water intercooler, which usually had a temperature over 100 degrees. Once the antifreeze was circulated from the tank into the intercooler, it would lower the intercooler temperature and provide for a cooler, denser air charge into the engine; the result was around 50 extra horsepower for a burst of about 30 seconds to a minute, depending on the size of the tank. The system for the Lightning was to be offered as a $750 option and would have been targeted towards drag racers and the like, as it could be used for a run down the drag strip and then re-cooled by the time the truck was back in line. The system was fairly non-intrusive – it only weighed about 25 pounds and did not require a new compressor or intercooler. But as with many concepts, it was ultimately scrapped. The technology was always stuck in the back of my mind, but with larger and more powerful engines being produced it could not find its place. With the advent of new fuel economy standards, we have seen small-displacement turbocharged engines pop up and they seem like the perfect candidate for this type of technology. Ford's EcoBoost 1.0-liter three-cylinder turbocharged engine, as used in the Fiesta and Focus, is one such candidate for this technology. It would add a negligent amount of weight but could provide a boost of 10 to 20 horsepower when needed, like merging onto the highway or catching up to traffic.

Weekly Recap: Toyota, Mazda team up to 'make cars better'

Toyota and Mazda are teaming for a noble purpose: to "make cars better." That's how the two Japanese automakers termed their partnership, which was announced this week. So what does this actually mean? The companies said they will set up a joint committee to look for areas of cooperation and named safety and the environment as issues they plan to tackle. From a product perspective, it's believed that Toyota is interested in Mazda's Skyactive engine portfolio. In turn, Mazda has its eye on Toyota's fuel-cell and plug-in hybrid technology. While more specifics were not confirmed, the companies said the "agreement will go beyond the traditional framework of cooperation," and it has the potential to be a long-range partnership. "The main purpose of this initiative is to enhance the appeal of our cars," Toyota president Akio Toyoda said at the announcement. Previously, Mazda has licensed Toyota's hybrid tech and assembled compact cars for Toyota in Mexico. Akio Toyoda said these projects "triggered" the automakers to explore further collaboration. Dave Sullivan, product analysis manager for AutoPacific, said the tie-up echoes Daimler's wide-ranging work with the Renault-Nissan alliance. "This could be a well-groomed match due to each having very unique skill sets," he said. OTHER NEWS & NOTES Volvo selects South Carolina for US factory Volvo confirmed this week that it will build its first US factory in South Carolina, with construction set to begin this fall. The company first revealed plans in March, though it didn't announce a site. The plant will have initial annual production of 100,000 units, though the vehicle or vehicles to be assembled were not specified. The factory, located near Charleston, will open in 2018 and ultimately employ 4,000 people. The facility will help Volvo continue its growth strategy, which includes strengthening its presence in the US market, where it wants to sell more than 100,000 cars per year. "Building a plant in the US is a reflection of Volvo Cars' commitment to the US and the key role the US plays in our growth objectives," Lex Kerssemakers, senior vice president, Americas, said in a statement. Ford GT spied on the road The 2017 Ford GT was spotted testing around the Blue Oval's headquarters in Dearborn, MI, this week. The raw body panels were exposed, and they lacked paint or camouflage. It's the first time the GT has been captured on the street after a spring of auto show reveals.

Detroit automakers observing 8:46 of silence to mark Juneteenth

GM Executive Vice President of Global Manufacturing Gerald Johnson, right, talks with employees at the Fairfax Assembly & Stamping Plant in Kansas City, Kansas. (file photo - GM)     All three Detroit automakers are observing Juneteenth, a day commemorating the end of slavery, on Friday by observing 8 minutes and 46 seconds of silence, among other companywide efforts to advance the causes of social and racial justice and equality. Juneteenth marks the date, June 19, in 1865 when Union soldiers, led by Maj. Gen. Gordon Granger, arrived at Galveston, Texas, and announced the Civil War had ended and enslaved African Americans were to be freed. President Abraham Lincoln had officially ended slavery more than two years prior via the Emancipation Proclamation, but Union forces didn't reach Texas until that time, so there was virtually no enforcement. The 8:46 timestamp is significant because it was the length of time that a police officer in Minneapolis knelt on the neck of George Floyd during an arrest, ultimately killing him and sparking waves of protests across the U.S. and overseas. Autoblog asked automakers about their plans to mark Juneteenth, what they were doing to advance the cause of social justice for Black people, and how many African Americans they employ in both blue- and white-collar jobs. We heard back from GM, Ford, Fiat Chrysler and Honda but not from Nissan and Toyota. General Motors GM’s U.S. workforce is 17.2% Black and 69.2% white, according to its most recent corporate Diversity and Inclusion Report. GM's total global employment is 173,000, and it says women and minorities represent 40% of its team of corporate officers. For reference, the Census Bureau says African Americans make up 13.4% of the U.S. population of roughly 328 million people. White people constitute 76.5%. As previously reported, GM planned to pause production at its factories on each shift today and observe silence for 8 minutes and 46 seconds. The company will also have a digital countdown clock atop the GM's headquarters in Detroit for the moment of silence. Additionally, Chairman and CEO Mary Barra has said she will lead a new Inclusion Advisory Board made up of people from within and outside GM to suggest areas for change and hold the company to its commitments to fight injustice and racial inequality.