2002 Ford Escape, No Reserve on 2040-cars

Auto blog

Ford recalls 591,177 vehicles in four separate campaigns

Ford is issuing recalls for a total of 591,177 vehicles worldwide, in four separate campaigns. The announcement comes just days after the discovery of door-latch problems in 390,000 of the automaker's cars. The largest of these new recalls covers 518,313 examples of the Ford Fusion and Lincoln MKZ from the 2013-2015 model years, plus the 2015 Edge. Of these, 487,301 of are in the US and 31,012 are in Canada. For vehicles in cold-weather areas, the bolts that hold the steering gear motor can corrode and fracture. If this happens, it could cause the power steering to fail, but manual control would be retained. There are no reported accidents or injuries from this problem. To fix things, dealers will replace the bolts and seal them. The next campaign covers 50,157 examples of the 2014 Focus, Edge, Escape, and Transit Connect, plus the Fiesta from 2014 and 2015. Of these, 45,505 are in the US, 4,618 in Canada, and 34 in Mexico. All of them exhibit a problem with the fuel pump where the nickel plating can cause the part to seize and the engine to stall, if this occurs. (All of which sounds like recent problems with Nissan and BMW models.) According to Ford, there is one allegation of an accident from this problem. Dealers will replace the fuel delivery module to fix the problem. Ford is also recalling 22,616 units of the 2015 Lincoln MKZ because when the headlights are on, the parking lamps are brighter than they are allowed to be. The light could affect the vision of other drivers. This campaign includes 21,435 of them in the US, 1,066 in Canada and 115 in Mexico. There are no accidents or injuries from the issue, but Ford is updating the software to dim the lights on these sedans. Finally, Ford has a safety campaign for 91 examples of the 2015 F-150 because an underbody heat shield might not be properly installed or not present at all, which can be a fire risk. There are no reports of any actual accidents or fires, though. The affected pickups will have the parts replaced or added, as necessary after a dealer inspection. To see the specific build dates for the models affected by each of these campaigns, you can read about them in the press release below. Related Video: FORD ISSUES FOUR SAFETY RECALLS IN NORTH AMERICA Ford Motor Company is issuing four safety recalls in North America. One accident and no injuries are attributed to these conditions.

Aluminum lightweighting does, in fact, save fuel

When the best-selling US truck sheds the equivalent weight of three football fullbacks by shifting to aluminum, folks start paying attention. Oak Ridge National Laboratory took a closer look at whether the reduced fuel consumption from a lighter aluminum body makes up for the fact that producing aluminum is far more energy intensive than steel. And the results of the study are pretty encouraging. In a nutshell, the energy needed to produce a vehicle's raw materials accounts for about 10 percent of a typical vehicle's carbon footprint during its total lifecycle, and that number is up from six percent because of advancements in fuel economy (fuel use is down to about 68 percent of total emissions from about 75 percent). Still, even with that higher material-extraction share, the fuel-efficiency gains from aluminum compared to steel will offset the additional vehicle-extraction energy in just 12,000 miles of driving, according to the study. That means that, from an environmental standpoint, aluminum vehicles are playing with the house's money after just one year on the road. Aluminum-sheet construction got topical real quickly earlier this year when Ford said the 2015 F-150 pickup truck would go to a 93-percent aluminum body construction. In addition to aluminum being less corrosive than steel, that change caused the F-150 to shed 700 pounds from its curb weight. And it looks like the Explorer and Expedition SUVs may go on an aluminum diet next. Take a look at SAE International's synopsis of the Oak Ridge Lab's study below. Life Cycle Energy and Environmental Assessment of Aluminum-Intensive Vehicle Design Advanced lightweight materials are increasingly being incorporated into new vehicle designs by automakers to enhance performance and assist in complying with increasing requirements of corporate average fuel economy standards. To assess the primary energy and carbon dioxide equivalent (CO2e) implications of vehicle designs utilizing these materials, this study examines the potential life cycle impacts of two lightweight material alternative vehicle designs, i.e., steel and aluminum of a typical passenger vehicle operated today in North America. LCA for three common alternative lightweight vehicle designs are evaluated: current production ("Baseline"), an advanced high strength steel and aluminum design ("LWSV"), and an aluminum-intensive design (AIV).

Chris Harris drives the 2015 Ford Mustang Over There

Ford makes some cars for America, and some cars for overseas. Sometimes those models cross over the ocean in one direction or another, but the Mustang has historically been a pony car meant for America. That all changes with the new model, though. It's not that Ford didn't design the new Mustang for American customers – it's just that it also refined it for markets overseas that aren't quite used to the live-axle brutality to which muscle car enthusiasts in the US have grown accustomed. Now that the Mustang is being offered in Europe – and in the UK with right-hand drive – it was only a matter of time before Chris Harris got his hands on one. And that's just what he's done for this latest video clip, taking a Mustang GT for a spin on both road and track in Wales. That's right, Harris is piloting the V8 model, not the EcoBoost four. So what does he think about an American expat shipped to the British isles? You'll want to watch the ten-minute clip yourself to gather his full impressions. But the long and short of it is that, while Harris doesn't think it's quite the match for something like a BMW M3, the Mustang doesn't cost anywhere near as much as the Bimmer. And that goes a long way, especially with all that rubber laid down on the track in the process.