2011 Ford Edge Sel on 2040-cars

Auto blog

Junkyard Gem: 1971 Mercury Comet 2-Door Sedan

When Ford introduced the original Maverick for the 1970 model year, Dearborn tradition required that a Mercury-badged version be created. That car ended up being the Comet, built from the 1971 through 1977 model years. Here's one of those first-year Comets in rough but recognizable condition, found in a Denver self-service yard not long ago. The Comet name had spent the 1960s affixed to the flanks of Mercurized Ford Falcons (1960-1965) and Fairlanes (1966-1969). Since the Maverick was the successor of the Falcon — sales of which went into an irrecoverable downward spiral once its sportier Mustang first cousin hit the streets — it made sense to move the Comet name over to the Mercury version. Nearly every American Mercury model ever sold was a U.S.-market Ford model with a different name and some gingerbread slapped on. Notable exceptions to this tradition include the 1999-2002 Mercury Cougar (mechanically based on the Contour but with a unique body) and the 1991-1994 Mercury Capri (an Australian-built mashup of Mazda components borrowed from the Ford Laser). The Comet was by far the cheapest Mercury model available in 1971, though it was considered more prestigious than its Maverick counterpart. The price tag on the '71 Comet two-door sedan started at $2,217 (about $16,505 in 2022 dollars), while the '71 Maverick two-door sedan cost $2,175 ($16,193 today). Meanwhile, AMC would sell you a new Hornet two-door sedan for one dollar less than a Maverick, Chevrolet had the Nova coupe for a dollar more than the Maverick, and Plymouth offered the Valiant Duster for $2,313 ($17,220 now). Toyota had a Maverick competitor as well that year, with the Corona at $2,150 for the sedan and $2,310 for the coupe. Having driven every one of the aforementioned models, I'd take the Duster if I went back in time and had to choose one (as a 1969 Corona owner, I'm not a fan of the 1971 facelift, though the Corona's build quality beats the Duster's). The build sticker on this car tells us that it was built at the Kansas City Assembly Plant (where Transits and F-150s are made today) and sold through the Los Angeles district sales office (there was a DSO in Denver, so it's a near-certainty that this car didn't start out in Colorado). The paint started out as Bright Blue Metallic (it's neither bright nor metallic 51 years down the road) and the interior was done up in Medium Blue Cloth & Vinyl.

NHTSA and Ford investigating steering issues in Crown Vic, Grand Marquis and Marauder

There may be more steering woes for the Ford Crown Victoria. The National Highway Traffic Safety Administration has opened a preliminary evaluation into the Crown Vic and Mercury Grand Marquis from the 2004 to 2007 model years and the Mercury Marauder for the 2004 and 2005 model years because the steering shaft can jam. The issue could potentially affect an estimated 500,000 vehicles.
According to the regulator, there is a possibility that the driver's side heat shield for the exhaust manifold can rust, dislodge, and then wedge into the steering shaft. If this occurs, it leads to a situation where the driver can no longer control the car.
NHTSA has received five complaints of this happening, including one alleged case with an injury. In that situation, the car was driving onto the highway, lost control and rolled over. One occupant was hurt in the accident.

NHTSA investigating 250k F-150s for possible power brake failure

The National Highway Traffic Safety Administration is opening a preliminary evaluation into the 2011-2012 Ford F-150 with the 3.5-liter EcoBoost V6 because of potential failure of the power braking assist. If a recall is required, it could affect an estimated 250,000 of the trucks. This investigation is prompted by NHTSA receiving 32 complaints about the electric vacuum assist pump allegedly failing in these trucks, which then causes the power braking assist to stop working. Drivers claim having no warning beforehand. There are also two reports of crashes that are purportedly linked to the problem, but the government agency lists no injuries. According to NHTSA, the issue may be getting worse because 60 percent of these allegations are from the past nine months. A preliminary evaluation doesn't necessarily lead to a recall, though. NHTSA uses them "to assess the cause, scope and frequency of the alleged defect." Ford spokesperson Kelli Felker tells Autoblog: "We will cooperate with NHTSA on this investigation, as we always do." Related Video: INVESTIGATION Subject : Brake Vacuum Pump Failure Date Investigation Opened: JUN 22, 2015 Date Investigation Closed: Open NHTSA Action Number: PE15026 Component(s): SERVICE BRAKES, ELECTRIC , SERVICE BRAKES, HYDRAULIC All Products Associated with this Investigation Vehicle Make Model Model Year(s) FORD F-150 2011-2012 Details Manufacturer: Ford Motor Company SUMMARY: The Office of Defects Investigation (ODI) has identified 32 complaints alleging electric vacuum assist pump failures resulting in loss of brake power assist and increased brake pedal effort in model year (MY) 2011-2012 Ford F-150 full-size pickup trucks equipped with 3.5L GTDI engine. None of the complaints reported any warning indicators to alert the driver of brake power assist loss or the potential of increased stopping distance. Two reports alleged crashes due to increased brake pedal effort required to stop or slow the vehicle. The complaints show an apparent increasing trend, with approximately 60 percent of complaints received within the past nine months. A Preliminary Evaluation has been opened to assess the cause, scope and frequency of the alleged defect.