Ice Cream Truck 2007 E-250 Mr. Zebra on 2040-cars

Auto blog

Ford To Unveil Solar Hybrid Concept Car At CES

Ford plans to unveil at this month's International CES gadget show a solar-powered concept car that offers the same performance as a plug-in hybrid but without the need for a plug. The C-Max Solar Energi Concept car uses a gasoline engine combined with a gizmo that acts like a magnifying glass to concentrate the sun's rays on the vehicle's roof-mounted solar panels. The automaker says the vehicle's estimated combined city-highway mileage is 100 miles (160 kilometers) per gallon. The U.S. auto maker says that by using solar power instead of an electric plug, a typical owner will reduce their annual greenhouse gas emissions by four metric tons. The company says it sold about 85,000 hybrid or electric vehicles in 2013, including 6,300 units of its C-Max Energi plug-in hybrid. The sun-ray concentrator was developed by researchers at the Georgia Institute of Technology and uses what is known as a Fresnel lens, which concentrates light but can be made thinner than a conventional lens. A full day of sunshine is equivalent to a four-hour battery charge, or 8 kilowatts, Ford says. On a full charge, it should have a range of 620 miles (997 kilometers), the same as the C-Max Energi. The concept car also comes with a plug-in port for standard electric charging. Ford says that 75 percent of all trips made by an average driver could be powered by the sun. After showing off the concept car at the convention in Las Vegas Jan. 7-10, Ford Motor Co. says that it will test the vehicle with institute researchers to determine if it's feasible for mass production. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Related Gallery 2013 Ford C-Max Energi Test Drive View 9 Photos Green CES Ford Alternative Fuels Fuel Efficiency Solar Cars solar car

2016 Ford Shelby GT350 Mustang rated at 526 hp, 429 lb-ft

When Ford debuted the Shelby GT350 Mustang at the LA Auto Show last year, we were told it'd have more than 500 horsepower and over 400 pound-feet of torque. And indeed it does; Ford confirmed today that its hot 'Stang will make 526 hp at 7,500 rpm and 429 lb-ft at 4,750 rpm. Compared to the GT350's main rival, the Chevy Camaro Z/28, that's an increase of 21 hp, but a loss of 52 lb-ft. That said, this Mustang packs some serious prowess, especially in its most hardcore GT350R trim. It sounds pretty wicked, too. It's worth noting that both the standard GT350 and GT350R use the same engine, with the same output ratings. It's also worth noting that this is a flat-plane-crank engine. It's the most powerful naturally aspirated engine Ford has ever made, with 102 hp per liter. Redline is 8,250 rpm. It's a lightweight engine, too – the 5.2-liter mill weighs less than Ford's own 5.0-liter Coyote V8. Perhaps most impressive is the price point for the 2016 Shelby GT350. The standard car comes in at $47,870, while the GT350R will command $61,370 – a big drop over the Camaro Z/28 and it's $73,300 sticker price (including destination but not gas guzzler charges). Ford confirmed the power output news at a media briefing today near its headquarters in Dearborn, MI. Stay tuned for more information as it becomes available. Related Video:

How Ford switched gears for the all-new F-150

Editor's Note: This story is authored by Julia Halewicz, a senior editor with AOL's Custom Solutions Group. She holds a Masters in Journalism from NYU and has spent her career as an editor of various newspapers, magazines and digital outlets. Last year on the Friday before Labor Day, the 2014 Ford F-150 pickup truck came off the Dearborn assembly line for the last time. After the last seam was welded, the F-150 that had been so beloved by American consumers would begin the transition from traditional steel manufacturing to an aluminum body, and the second phase of Ford's 2007 blueprint for sustainability would begin. Jobs would be created, and Ford would deliver a stronger product to its consumers. It was a moment Ford would call the biggest in the company's 111-year history. Breaking The Mold For some, the change was almost unfathomable. How could a truck be made with aluminum, and why change what clearly was working very well for the company? "We have a saying at Ford that leaders lead," said Doug Scott, the company's truck group marketing manager. "This was an ideal product to make with aluminum-alloy, because lightweighting made so much sense for a truck, because the extent to which you could take weight out of a truck, you could add more value to the customer in terms of more towing, more payload, more durability, more efficiency – so again all this required us to be out in front further out in front that we normally would be to make sure that we would deliver on all those expectations." Ford began the planning process about five years before the first aluminum F-150 would come to market. The company had a lot of questions. What was customer acceptance of aluminum, could they build the truck, and could the truck be repaired out in the field? Finally, Ford needed to determine if there were enough materials available to support the demand for the F-Series. Aluminum vehicles aren't unusual, but had never been built on the scale of the F-150 – approximately one every minute. Ford created two prototypes to determine if the product would meet and exceed consumer expectations. Any change to the vehicle had to be justified in performance, safety and economy. An aluminum truck needed to be safer, lighter, have increased payload, haul more, and have improved fuel efficiency. After driving the prototypes, Ford knew it was ready to move forward. Once the aluminum truck was ready to build, the next challenge was quickly transforming the plant.