1999 Ford Econoline Cargo Van E-150 Recreational Low Miles on 2040-cars

Auto blog

Ford's new Focus RS hatches hot and heads for America

The hot hatch market is heating up, and heating up fast. What you see here is Ford's new challenger for pocket-rocket supremacy, the third iteration of the breed and the 30th model to wear the Rallye Sport designation. But perhaps best of all, it will be the first time Ford will offer a new Focus RS in America. Following yesterday's leak, the latest Ford Focus RS is now ready to step out into the light and light up its tires. Answering the call is the same 2.3-liter EcoBoost turbo four as you'd find in the new Mustang, but upgraded with a new low-inertia twin-scroll turbocharger, larger compressor and intercooler, freer-flowing intake, large-bore dual-pipe exhaust with electronically controlled valve and upgraded internal components. The result is a 6,500-rpm redline (closer to that of Ford's atmospheric performance engines) and an output quoted as "well in excess of 315 horsepower" – which is already 5 more than the EcoBoost Mustang and a good 63 more than the existing Focus ST. Power is transmitted to the tarmac through a new performance-focused all-wheel drive system with torque vectoring that can send as much as 70 percent of available twist to the rear wheels (and as much as 100 percent between them). The system works in tandem with the brake-based torque vectoring system and stability control, and will even divert torque to the outside rear wheel under cornering to keep it flat and under control while reducing understeer. Those still suspicious of dual-clutch gearboxes will also be pleased to read that Ford has stuck with a conventional six-speed manual. We'll reserve judgement on the inclusion of the electric power steering until we get a chance to drive it, though. Of course the small team of global Ford Performance engineers who developed the new Focus RS – and the Gymkhana legend Ken Block who consulted on the project – didn't just tinker with the powertrain and leave it at that. The suspension features stiffer spring rates, bushings and anti-roll bars than the Focus ST, augmented by two-mode switchable dampers. 19-inch alloys wear Michelin Pilot Super Sport rubber, with optional Pilot Sport Cup 2 semi-slicks for track-day enthusiasts. Ford has yet to detail the brakes on its new hot hatch, but you can bet they've been upgraded as well.

How Ford switched gears for the all-new F-150

Editor's Note: This story is authored by Julia Halewicz, a senior editor with AOL's Custom Solutions Group. She holds a Masters in Journalism from NYU and has spent her career as an editor of various newspapers, magazines and digital outlets. Last year on the Friday before Labor Day, the 2014 Ford F-150 pickup truck came off the Dearborn assembly line for the last time. After the last seam was welded, the F-150 that had been so beloved by American consumers would begin the transition from traditional steel manufacturing to an aluminum body, and the second phase of Ford's 2007 blueprint for sustainability would begin. Jobs would be created, and Ford would deliver a stronger product to its consumers. It was a moment Ford would call the biggest in the company's 111-year history. Breaking The Mold For some, the change was almost unfathomable. How could a truck be made with aluminum, and why change what clearly was working very well for the company? "We have a saying at Ford that leaders lead," said Doug Scott, the company's truck group marketing manager. "This was an ideal product to make with aluminum-alloy, because lightweighting made so much sense for a truck, because the extent to which you could take weight out of a truck, you could add more value to the customer in terms of more towing, more payload, more durability, more efficiency – so again all this required us to be out in front further out in front that we normally would be to make sure that we would deliver on all those expectations." Ford began the planning process about five years before the first aluminum F-150 would come to market. The company had a lot of questions. What was customer acceptance of aluminum, could they build the truck, and could the truck be repaired out in the field? Finally, Ford needed to determine if there were enough materials available to support the demand for the F-Series. Aluminum vehicles aren't unusual, but had never been built on the scale of the F-150 – approximately one every minute. Ford created two prototypes to determine if the product would meet and exceed consumer expectations. Any change to the vehicle had to be justified in performance, safety and economy. An aluminum truck needed to be safer, lighter, have increased payload, haul more, and have improved fuel efficiency. After driving the prototypes, Ford knew it was ready to move forward. Once the aluminum truck was ready to build, the next challenge was quickly transforming the plant.

Ford S-Max Concept proves minivans aren't always minivans [w/video]

Ford's latest don't-call-it-a-minivan is called the S-Max Concept, and it's a looker. As you can see, the conceptual overgrown hatch makes good use of Ford's latest design language, especially at the very front of the S-Max, which bears a striking resemblance to production models that include the Focus, C-Max and Fusion.
Powering the S-Max Concept is a 1.5-liter EcoBoost engine, and while Ford doesn't actually list power figures for the concept, previous estimates put the mill at 133 kW of power (about 178 horsepower) and 240 Nm of torque (about 177 pound-feet). Inside, there's room for seven passengers and at least some of their luggage.
As you'd expect, the S-Max is loaded up with all of Ford's latest infotainment technology, including Sync and MyFordTouch. More interestingly, there are also onboard heart and blood glucose monitors that we doubt will be seeing the light of production anytime soon. On that topic, don't expect to see any S-Max-shaped vehicles hitting the US market from Ford, either. Scroll down below for the press release, but not before checking out the high-res image gallery above.