24k Low Miles Ford Crown Victoria Red Luxury Plus Leather on 2040-cars

Auto blog

Junkyard Gem: 1971 Mercury Comet 2-Door Sedan

When Ford introduced the original Maverick for the 1970 model year, Dearborn tradition required that a Mercury-badged version be created. That car ended up being the Comet, built from the 1971 through 1977 model years. Here's one of those first-year Comets in rough but recognizable condition, found in a Denver self-service yard not long ago. The Comet name had spent the 1960s affixed to the flanks of Mercurized Ford Falcons (1960-1965) and Fairlanes (1966-1969). Since the Maverick was the successor of the Falcon — sales of which went into an irrecoverable downward spiral once its sportier Mustang first cousin hit the streets — it made sense to move the Comet name over to the Mercury version. Nearly every American Mercury model ever sold was a U.S.-market Ford model with a different name and some gingerbread slapped on. Notable exceptions to this tradition include the 1999-2002 Mercury Cougar (mechanically based on the Contour but with a unique body) and the 1991-1994 Mercury Capri (an Australian-built mashup of Mazda components borrowed from the Ford Laser). The Comet was by far the cheapest Mercury model available in 1971, though it was considered more prestigious than its Maverick counterpart. The price tag on the '71 Comet two-door sedan started at $2,217 (about $16,505 in 2022 dollars), while the '71 Maverick two-door sedan cost $2,175 ($16,193 today). Meanwhile, AMC would sell you a new Hornet two-door sedan for one dollar less than a Maverick, Chevrolet had the Nova coupe for a dollar more than the Maverick, and Plymouth offered the Valiant Duster for $2,313 ($17,220 now). Toyota had a Maverick competitor as well that year, with the Corona at $2,150 for the sedan and $2,310 for the coupe. Having driven every one of the aforementioned models, I'd take the Duster if I went back in time and had to choose one (as a 1969 Corona owner, I'm not a fan of the 1971 facelift, though the Corona's build quality beats the Duster's). The build sticker on this car tells us that it was built at the Kansas City Assembly Plant (where Transits and F-150s are made today) and sold through the Los Angeles district sales office (there was a DSO in Denver, so it's a near-certainty that this car didn't start out in Colorado). The paint started out as Bright Blue Metallic (it's neither bright nor metallic 51 years down the road) and the interior was done up in Medium Blue Cloth & Vinyl.

Ford to auction Mustang Cobra Jet prototype for charity [w/video]

Prototypes developed by major automakers typically remain in said company's custody, but every once in a while, one trickles out into private hands. And that's just what we have here. Ford is donating a one-of-a-kind factory prototype for the 2014 Mustang Cobra Jet that will be auctioned off later this month by Barrett-Jackson in Las Vegas to benefit the National Multiple Sclerosis Society.
Powered by a 5.0-liter supercharged V8 mated to a T4 competition gearbox, this rare Cobra Jet prototype includes a wheelie bar, chromoly roll cage, Weld wheels, three-link rear suspension, racing brakes, 9-inch rear axle and more. It's painted in a unique satin orange with reflective gray striping scheme, bears the serial number 2014 BJMS CJXX1 and is fully ready for NHRA competition on the drag strip.
To be offered with no reserve on Saturday, September 28, 2013, the Cobra Jet prototype's winning bidder will also receive tutelage at Roy Hill's Drag Racing School in Sophia, NC, along with tours of the Ford Product Development Center, Ford Racing headquarters and Ford Design Studios with Mustang chief engineer Dave Pericak. Scope out the video and details below for what could be the ultimate Mustang experience for a good cause.

Ford recalling 433k cars for engines that don't shut off

Ford Motor Company has announced an enormous recall affecting 433,000 vehicles built between April 2014 and June 2015. There's a problem with the body control module in the affected vehicles that can prevent them from turning off, even if the key is removed from the ignition or stop/start button has been pressed. Individual models include the Focus and C-Max, both built at the Michigan Assembly Plant. The defective Foci were built between June 17, 2014 and June 12, 2015, while the C-Maxes were built between April 22, 2014 and June 12, 2015. Also affected are model year 2015 Escape CUVs, built at the Louisville Assembly Plant in Kentucky, between April 1, 2014 and June 12, 2015. As is usually the case, the overwhelming majority of vehicles – 374,381 – are registered in the United States, while the 52,180 are in Canada and 5,135 are in Mexico. The Blue Oval is not aware of any injuries or accidents due to this defect. Individual consumers, meanwhile, will need to report into dealers to have the body control module's software updated. Scroll down for the brief press release from Ford. Related Video: FORD ISSUES SAFETY COMPLIANCE RECALL IN NORTH AMERICA DEARBORN, Mich., July 2, 2015 – Ford Motor Company is issuing a safety compliance recall for approximately 433,000 vehicles in North America, including certain 2015 Focus, C-MAX and Escape vehicles, for an issue with the body control module. In these vehicles, it could be possible for the engine to continue to run after turning the ignition key to the "off" position and removing the key, or after pressing the Engine Start/Stop button. This is a compliance issue with FMVSS 114 regarding theft protection and rollaway prevention. Ford is not aware of any accidents or injuries associated with this issue. Affected vehicles include certain 2015 Focus vehicles built at Michigan Assembly Plant from June 17, 2014, through June 12, 2015; certain 2015 C-MAX vehicles built at Michigan Assembly Plant from April 22, 2014, through June 12, 2015; and certain 2015 Escape vehicles built at Louisville Assembly Plant from April 1, 2014, through June 12, 2015. There are 432,096 vehicles in North America, including 374,781 in the United States and federalized territories, 52,180 in Canada and 5,135 in Mexico. Dealers will update the body control module software at no cost to the customer.