1986 Ford Bronco Eddie Bauer Sport Utility 2-door 5.0l on 2040-cars

Auto blog

Lincoln MKC recalled because start button located too close to touchscreen [UPDATE]

UPDATE: Ford spokesperson Kelli Felker responded to our questions and let us know that the fix for the push-button start on the 2015 MKC has the switch moved to the top of the of the column of gear shift buttons instead of the bottom. Owners should be notified about both campaigns "toward the end of February." After massive campaigns from General Motors and to fix Takata airbag inflators, 2014 will undoubtedly go down as The Year Of The Recall. And with little time to spare, Ford is getting in just under the wire to adding two more to its yearly total. The larger of the campaigns is actually one of the most bizarre campaigns we've heard of all year. Lincoln is recalling 13,574 units of its 2015 MKC compact crossover in North America to move the location of the push-button ignition switch on the dashboard. According to the automaker's announcement: "Due to the switch's close proximity to other controls, occupants are inadvertently shutting off the engine while driving." The button is located near the bottom of the touchscreen, which can apparently make it possible to hit by mistake. Back when Autoblog first drove the new MKC in June, we came away very impressed, but noted: "... we're still not completely sold on the aforementioned pushbutton transmission selector ... it still seems somewhat gimmicky and it can't be operated by feel alone, as you might when shifting a traditional console-mounted lever from Park to Drive." According to Lincoln, there have been no reported accidents or injuries stemming from this button misapplication. Of the affected vehicles, there are 11,144 in the US, 2,033 in Canada and 397 in Mexico. To fix the problem, dealers are moving the button to a different location and reprogramming the powertrain control module. According to Automotive News, models built since September already have a different layout. The change was reportedly done to match the rest of the Lincoln lineup. The second recall covers 12,205 units of the 2014 Ford Escape (2015 model year pictured below) and 2015 Lincoln MKC in North America because of a problem with nickel plating on the fuel pump. The issue can cause the pump to seize, which can cause the crossovers not to start or stall while driving. The automaker is not aware of any accidents or injuries related to this fault. Dealers are replacing the fuel deliver module to fix the situation. Of the affected vehicles, there are 9,038 in the US, 3,074 in Canada and 93 in Mexico.

New autonomous testing ground in Michigan will help battle bad weather

If one of the big weaknesses of autonomous vehicles is their ability to navigate in the snow, consider this a trial by fire. The American Center for Mobility says it has opened its $110 million driverless car testing facility on the site of a former General Motors assembly plant in Michigan, with Toyota and auto supplier Visteon the first to begin testing this week. The ACM proving ground is a 500-acre site at historic Willow Run in Ypsilanti Township, near Ann Arbor. It's one of 10 sites designated by the U.S. Department of Transportation as pilot proving ground sites to test AV technologies. It features a variety of simulated environments to test driverless cars, including a 2.5-mile highway loop, two double overpasses, intersections, roundabouts and a 700-foot curved tunnel. It also opens just as the region experiences a series of snowstorms and the first frigid temperatures of the season. That ability to test autonomous vehicles in a wide variety of weather conditions is important, as autonomous vehicle sensors have struggled to handle cold, wet and snowy conditions. Google parent Alphabet in October said its Waymo division was expanding its winter testing operations to Michigan, making it the sixth state where it's testing its driverless car systems. In a Medium blog post, Waymo CEO John Krafcik wrote that "This type of testing will give us the opportunity to assess the way our sensors perform in wet, cold conditions. And it will also build on the advanced driving skills we've developed over the last eight years by teaching our cars how to handle things like skidding on icy, unplowed roads." Waymo also opened a development center in suburban Detroit in 2016, working with Fiat Chrysler to integrate its autonomous technology into Chrysler Pacifica hybrid minivans. Visteon began testing and validating its DriveCore autonomous driving platform to evaluate algorithms, vehicle-to-vehicle and vehicle-to-infrastructure technology and other systems. Toyota used the facility Wednesday to begin orientation and driver training. ACM has so far secured $110 million to construct the first two phases from founders Ford, Hyundai America Technical Center, Toyota and Visteon, and says it expects to announce more investment soon.

Detroit 3 to implement delayed unified towing standards for 2015

Car buyers have a responsibility to be well-informed consumers. That's not always a very simple task, but some guidelines are self-evident. If you live in a very snowy climate, you generally know a Ford Mustang or Chevrolet Camaro might not be as viable a vehicle choice as an all-wheel drive Explorer or Traverse, for example. If you want a fuel-efficient car, it's generally a good idea to know the difference between a diesel and a hybrid. But what if it's kind of tough to be an informed consumer? What if the information you need is more difficult to come by, or worse, based on different standards for each vehicle? Well, in that case, you might be a truck shopper. For years, customers of light-duty pickups have had to suffer through different ratings of towing capacities for each brand. For 2015 model year trucks, though, that will no longer be a problem. According to Automotive News, General Motors, Ford and Chrysler Group have announced that starting with next year's models, a common standard will be used to measure towing capacity. The Detroit Three will join Toyota, which adopted the Society of Automotive Engineers' so-called SAE J2807 standards way back in 2011. The standard was originally supposed to be in place for MY2013, but concerns that it would lower the overall stated capacity for trucks led Detroit automakers to pass. Ford originally passed, claiming it'd wait until its new F-150 was launched to adopt the new standards, leading GM and Ram to follow suit. Nissan, meanwhile, has said it will adopt the new standards as its vehicles are updated, meaning the company's next-generation Titan should adhere to the same tow ratings as its competitors. While the adoption of SAE J2807 will be helpful for light-duty customers, those interested in bigger trucks will still be left with differing standards. There is no sign of the new tow standards being adopted for the heavy-duty market.