1977 Ford Bronco on 2040-cars

Auto blog

NHTSA probes 2014 Ford Edge Sport 22-inch alloy wheels

The National Highway Traffic Safety Administration is opening a preliminary evaluation into the 2014 Ford Edge Sport for the possibility its 22-inch wheels could break while on the road. This affects an estimated 20,000 examples of the crossover, according to NHTSA. The case that instigated this evaluation was submitted to NHTSA in November 2014. The driver reported that the front, right corner of the vehicle suddenly dipped, and the Edge went into a field. No one was harmed, but upon investigation, the wheel had broken into two pieces, according to The Detroit News. When this happened, this crossover had been driven an estimated 8,500 miles. NHTSA's preliminary evaluations are meant "to assess the scope, frequency, and safety-related consequences of the alleged defect in the subject vehicles." If a problem is discovered during the investigation, this process can lead to a recall. Ford spokesperson Kelli Felker told Autoblog, "We will cooperate with NHTSA on this investigation, as we always do." INVESTIGATION Subject : Wheel Separation Date Investigation Opened: MAY 20, 2015 Date Investigation Closed: Open NHTSA Action Number: PE15020 Component(s): WHEELS All Products Associated with this Investigation Vehicle Make Model Model Year(s) FORD EDGE 2014 Details Manufacturer: Ford Motor Company SUMMARY: On November 29, 2014, ODI received a complaint (ODI No. 10661278) reporting the sudden failure of an original equipment 22-inch alloy wheel rim that failed on a model year 2014 Ford Edge. The right-front corner of the vehicle suddenly dropped while driving, causing the vehicle to drive off the road and into a field. The right-front wheel rim was found to have broken into two pieces. The owner said that there was no prior warning or wheel related problems with the vehicle. The vehicle had been driven approximately 8,500 miles at the time of the incident. A preliminary evaluation has been opened to assess the scope, frequency and safety-related consequences of the alleged defect in the subject vehicles. Related Video:

How Ford switched gears for the all-new F-150

Editor's Note: This story is authored by Julia Halewicz, a senior editor with AOL's Custom Solutions Group. She holds a Masters in Journalism from NYU and has spent her career as an editor of various newspapers, magazines and digital outlets. Last year on the Friday before Labor Day, the 2014 Ford F-150 pickup truck came off the Dearborn assembly line for the last time. After the last seam was welded, the F-150 that had been so beloved by American consumers would begin the transition from traditional steel manufacturing to an aluminum body, and the second phase of Ford's 2007 blueprint for sustainability would begin. Jobs would be created, and Ford would deliver a stronger product to its consumers. It was a moment Ford would call the biggest in the company's 111-year history. Breaking The Mold For some, the change was almost unfathomable. How could a truck be made with aluminum, and why change what clearly was working very well for the company? "We have a saying at Ford that leaders lead," said Doug Scott, the company's truck group marketing manager. "This was an ideal product to make with aluminum-alloy, because lightweighting made so much sense for a truck, because the extent to which you could take weight out of a truck, you could add more value to the customer in terms of more towing, more payload, more durability, more efficiency – so again all this required us to be out in front further out in front that we normally would be to make sure that we would deliver on all those expectations." Ford began the planning process about five years before the first aluminum F-150 would come to market. The company had a lot of questions. What was customer acceptance of aluminum, could they build the truck, and could the truck be repaired out in the field? Finally, Ford needed to determine if there were enough materials available to support the demand for the F-Series. Aluminum vehicles aren't unusual, but had never been built on the scale of the F-150 – approximately one every minute. Ford created two prototypes to determine if the product would meet and exceed consumer expectations. Any change to the vehicle had to be justified in performance, safety and economy. An aluminum truck needed to be safer, lighter, have increased payload, haul more, and have improved fuel efficiency. After driving the prototypes, Ford knew it was ready to move forward. Once the aluminum truck was ready to build, the next challenge was quickly transforming the plant.

Barrett-Jackson rundown: 2024 GMC Hummer EV, Colin Powell's Corvette and more

The echoes of the last hammer fall at Barrett-Jackson's Scottsdale Auction have disappeared into the Arizona night, as have the record crowds and the traffic jams. During the Super Saturday charity auctions, three main attractions drove onto the dais for bidding: Late U.S. Chairman of the Joint Chiefs of Staff and Secretary of State General Colin Powell’s 2015 Chevrolet Corvette Stingray, the hammer price benefitting AmericaÂ’s Promise Alliance, the nonprofit Powell founded to support kids; The first production 2024 GMC Hummer EV SUV Edition 1 with VIN 001, proceeds going to Tread Lightly!, which educates people on how to enjoy the outdoors in a motorized vehicle and simultaneously protect the outdoors; And the first production 2024 Ford Mustang GT Fastback VIN 001, its hammer price benefiting the Juvenile Diabetes Research Foundation. Before the Saturday showcase, charity auctions on Friday took Barrett-Jackson past a huge milestone. When an 800-horsepower 2021 Shelby Super Snake Count's Kustoms Edition hammered for $350,000 to support the veteran's charity Camp Freedom, the auction house officially surpassed the $150 million mark for charity auction proceeds. Piling on before the clock struck midnight, a 2023 Ford F-150 Lightning 4x4 Super Crew sold for $275,000, those funds donated to Fighter Country Foundation. Then came Saturday. Powell's Gunmetal Gray on black Stingray was said to be a daily driver, but with just 15,600 miles on the odometer, Powell — who died in 2021 — apparently had a very short commute. Equipped with an eight-speed automatic transmission and chrome wheels, it sold for $200,000. The first production 2024 GMC Hummer EV SUV Edition 1 ran the bidding up to $500,000. That's quite a ways down on the $2,500,000 that the bedded 2022 GMC Hummer EV Edition 1 garnered at the charity auction in 2021, and not a bad price all things considered. The owner gets the first one off the line instead of getting lost in the 90,000-order backlog, and the markup goes to a good cause instead of a flipper and eBay fees. The first production 2024 Mustang GT Fastback brought in both less and more than the Hummer EV. The Ford's hammer price came to $490,000. However, two additional philanthropic donations for this lot in the amounts of $50,000 and $25,000 took the final price to $565,000. The big movers on the day were outside the charity sphere, four cars breaking the million-dollar mark.