2015 Ford Duty on 2040-cars

Auto blog

Ford Everest Concept shows China also has an affinity for big trucks

The Ford Everest Concept SUV at the 2014 Beijing Motor Show shows the future of the Blue Oval's truck line in China. While a concept for now, we're told that JMC, Ford's Chinese joint-venture partner, will build a production version sometime in the near future.
With design from Ford's Asia Pacific design team, the handsome seven-passenger SUV shows off some very muscular styling with wraparound headlights that hook into the contours of the angular trapezoidal grille. The beltline rises up the body in the rear and makes the back appear higher than the front. The rear is made from hard, chiseled contours that give the truck a very tough look. The Everest looks ready for some rough roads.
Ford is keeping the interior and mechanical details about the Everest a secret for now, but the SUV is rumored to share some components with the overseas Ranger pickup. The company has no plans to sell the truck in North America. Scroll down to read the official announcement, including the few details on its production.

A cool boost to turbocharger performance

Since the advent of the forced-induction engine, we have been looking for ways to get every drop of performance we can. There are many approaches to getting additional power using better intercooling, water injection, or even adding nitrous oxide. One take on a short instant burst of power is being researched by Mahle and involves providing supercooled air to an engine, which allows it to burn a leaner fuel mixture and produce more power. The supercooling idea is not new and was examined by Ford in 1993 on the Mustang Mach III concept car, then brought up again in 2003 with the SVT F-150 Lightning concept. Ford called its system the SuperCooler; it was designed to work with any turbocharged or supercharged engine equipped with a water-to-air intercooler. The system on the Lightning concept used a small tank of antifreeze that was hooked up to the truck air conditioning compressor. The air conditioning compressor cooled the antifreeze down to about 30 degrees. The other side of the tank was hooked up to the air-to-water intercooler, which usually had a temperature over 100 degrees. Once the antifreeze was circulated from the tank into the intercooler, it would lower the intercooler temperature and provide for a cooler, denser air charge into the engine; the result was around 50 extra horsepower for a burst of about 30 seconds to a minute, depending on the size of the tank. The system for the Lightning was to be offered as a $750 option and would have been targeted towards drag racers and the like, as it could be used for a run down the drag strip and then re-cooled by the time the truck was back in line. The system was fairly non-intrusive – it only weighed about 25 pounds and did not require a new compressor or intercooler. But as with many concepts, it was ultimately scrapped. The technology was always stuck in the back of my mind, but with larger and more powerful engines being produced it could not find its place. With the advent of new fuel economy standards, we have seen small-displacement turbocharged engines pop up and they seem like the perfect candidate for this type of technology. Ford's EcoBoost 1.0-liter three-cylinder turbocharged engine, as used in the Fiesta and Focus, is one such candidate for this technology. It would add a negligent amount of weight but could provide a boost of 10 to 20 horsepower when needed, like merging onto the highway or catching up to traffic.

Drive Ford's new Mustang in Need For Speed Rivals

If waiting for the all-new 2015 Ford Mustang to hit dealerships is just too tall of an order, you'll be happy to hear that there is now an alternative means of getting behind the wheel of America's favorite pony car. The Mustang is making its video game debut in Need For Speed Rivals.
"We worked closely with the development team at EA to provide them with engineering data for the new Mustang, several months before we showed it to the rest of the world," said Ford product licensing manager Mark Bentley. "Computer design models enabled the game developers to create an accurate representation of the new Mustang before it goes on sale."
Players will have access to five unique designs for the Mustang, allowing a degree of individuality beyond solid colors and decals. According to Digital Marketing Manager Andrea Zuehlk of Ford, those designs are drawn from the four most popular designs on the Mustang Customizer, an online, mobile and tablet app that allows the public to design their own custom Mustang. A fifth design, penned by drift racer Vaughn Gittin, Jr., is also available.