1997 Ford Contour Lx Sedan 4-door 2.5l on 2040-cars

Auto blog

UPDATE: GM, Ford, FCA, Honda shutting down all North America plants

Following an earlier report that General Motors, Ford and FCA would take action to curtail the potential spread of the Coronavirus, news comes today that the three American automakers will instead close all North American plants for an unknown period of time. Ford said in a statement that it "is temporarily suspending production at its manufacturing sites in North America to March 30 to thoroughly clean its facilities to protect its workforce and boost containment efforts for the COVID-19 Coronavirus." General Motors followed with a statement confirming that its suspension "will last until at least March 30," and adding that the situation will be reevaluated from week to week after that. FCA has not yet issued an official statement. Rory Gamble, president of the United Auto Workers union, praised the news. "This will give us time to review best practices and to prevent the spread of this disease," Gamble said in a statement. According to the Associated Press, around 150,000 workers are "likely to receive supplemental pay in addition to unemployment benefits." The United Auto Workers had asked the automakers to reconsider their position on Wednesday, a day after the parties agreed to slow production at U.S. plants and limit the number of workers on the job at one time to prevent the spread of the virus, a source who asked not to be identified told Reuters. The UAW’s new request for the closure of the Detroit Three automakersÂ’ U.S. plants came after Honda said on Wednesday it was temporarily shutting its North American plants for six days because of the anticipated decline in consumer demand. Plants/Manufacturing UAW/Unions Chrysler Fiat Ford GM coronavirus

Ford picks up new Ranger overseas [w/video+poll]

The new Ford F-150 is lighter and more efficient than the model it replaced, but if it's a smaller Ford pickup that you really wanted, you're going to have to pack your bags. Because while Dearborn stopped selling the Ranger in North America years ago, it still offers one in markets overseas. And it's just rolled out a refreshed model at the 2015 Bangkok Motor Show in Thailand. Following the reveal of the new Everest sport-ute with which it shares its chassis, the refreshed Ranger pickup benefits from revised sheetmetal, powertrain and equipment throughout. The changes are punctuated by a front end with a more rugged-looking grille, a more sculpted hood and projector headlamps. The interior has been updated as well, not only in terms of style but equipment as well, with an eight-inch touchscreen display in the dashboard running Sync 2 and dual TFT displays flanking the speedo in the instrument cluster. Under the hood, buyers will be able to choose between a carryover 2.5-liter inline four with 163 horsepower and 166 pound-feet of torque that's the sole gasoline option or one of two diesel options: a 2.2-liter four now producing 158 hp and 284 lb-ft, or a 3.2-liter inline-five with 197 hp and 347 lb-ft. The diesel engines are more efficient than before with available stop/start engine management, and offer what Ford says is class-leading towing capability. Six-speed automatic or manual gearboxes transmit the power to the road through either the rear wheels or all four. Production will continue in Thailand for the Asia Pacific Market, South Africa for Africa and Europe, and in Argentina for Latin America. All told the new Ranger will be offered in 180 markets, around the world but for better or worse, ours won't be one of them. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

A cool boost to turbocharger performance

Since the advent of the forced-induction engine, we have been looking for ways to get every drop of performance we can. There are many approaches to getting additional power using better intercooling, water injection, or even adding nitrous oxide. One take on a short instant burst of power is being researched by Mahle and involves providing supercooled air to an engine, which allows it to burn a leaner fuel mixture and produce more power. The supercooling idea is not new and was examined by Ford in 1993 on the Mustang Mach III concept car, then brought up again in 2003 with the SVT F-150 Lightning concept. Ford called its system the SuperCooler; it was designed to work with any turbocharged or supercharged engine equipped with a water-to-air intercooler. The system on the Lightning concept used a small tank of antifreeze that was hooked up to the truck air conditioning compressor. The air conditioning compressor cooled the antifreeze down to about 30 degrees. The other side of the tank was hooked up to the air-to-water intercooler, which usually had a temperature over 100 degrees. Once the antifreeze was circulated from the tank into the intercooler, it would lower the intercooler temperature and provide for a cooler, denser air charge into the engine; the result was around 50 extra horsepower for a burst of about 30 seconds to a minute, depending on the size of the tank. The system for the Lightning was to be offered as a $750 option and would have been targeted towards drag racers and the like, as it could be used for a run down the drag strip and then re-cooled by the time the truck was back in line. The system was fairly non-intrusive – it only weighed about 25 pounds and did not require a new compressor or intercooler. But as with many concepts, it was ultimately scrapped. The technology was always stuck in the back of my mind, but with larger and more powerful engines being produced it could not find its place. With the advent of new fuel economy standards, we have seen small-displacement turbocharged engines pop up and they seem like the perfect candidate for this type of technology. Ford's EcoBoost 1.0-liter three-cylinder turbocharged engine, as used in the Fiesta and Focus, is one such candidate for this technology. It would add a negligent amount of weight but could provide a boost of 10 to 20 horsepower when needed, like merging onto the highway or catching up to traffic.