One Family Ncarolina / Florida Restored- 1968 Ford Torino Gt Fastback - 1k Mi on 2040-cars

Auto blog

Ford 1.0L EcoBoost 3-Cylinder: Autoblog Technology of the Year award finalist

As the old saying goes, "There's no replacement for displacement." But these days, many automakers are launching powerful, downsized engines that offer similar or better power output than their predecessors, all while offering improvements in fuel economy and emissions. These days, we're seeing automakers replacing eight-cylinder engines with turbocharged sixes, and the naturally aspirated six-cylinder motors are being phased out in favor of potent turbo fours. But Ford has gone even smaller, offering a three-cylinder, turbocharged engine with one single liter of displacement.
Sure, three-cylinder engines aren't anything new - they've been offered around the globe for ages. But Ford's EcoBoost 1.0L powerplant is perhaps the best application the Autoblog team has tested. Gone are the triple-cylinder complaints of yore - this engine doesn't sound anemic or buzzy, and there's healthy power output on tap. In fact, compared to the 1.6-liter inline-four that Ford also offers in the Fiesta, the 1.0-liter is more powerful, while boasting an impressive 45 miles per gallon on the highway.
This engine has already received numerous accolades, including winning the International Engine of the Year award in 2012, 2013 and 2014. The 1.0L EcoBoost will be available in the refreshed 2015 Ford Focus here in the US.

Shelby GT350R offers first mass-produced carbon fiber wheels

In the world of race engineering, reducing total weight is good, but reducing unsprung weight is flippin' fantastic. That's the reason Ford is pushing the envelope in terms of technology for the Shelby GT350R's wheels. Joining the likes of Koenigsegg in the offering, Ford has teamed with Australian outfit Carbon Revolution to produce the CF rollers en masse for the first time. Destined for the hubs of the new Shelby GT350R, the new hoops weigh just 18 pounds each, versus the 33-lbs weight of a similar aluminum wheel. On top of slashing up to 60 pounds in unsprung weight, there's such a reduction in rotational inertia – 40 percent, versus aluminum wheels – that Ford actually has to recalibrate the magnetic ride control system and springs. Thanks to, we're guessing, scenes of crashed Formula One cars disintegrating and spewing shards of carbon fiber all over the track, Ford seems quite keen to do away with the idea that CF is strong, but brittle. The company conducted extensive shock testing, ramming a wheel into a curb at speed. According to the Blue Oval, the lightweight wheel allowed the suspension to respond so quickly that the impact was "greatly diminished," causing the tester to run the experiment again, thinking there'd been a mistake. After recording brake rotor temperatures of 900 degrees Celsius (over 1,650 degrees Fahrenheit, or well past the point that aluminum or magnesium would melt) during testing, Ford and Carbon Revolution actually redesigned the wheels to "a thermal standard more suitable for motorsports," by adding an "incredibly thin, nearly diamond-hard coating that reliably shields the resin from heat." The same process was used to protect engine turbine blades on the Space Shuttle. While the work by Ford and Carbon Revolution should make GT350R customers excited, the work being done here could have serious implications for performance cars in the future. That's the real takeaway here, and is something that should leave fans of all performance vehicles excited.

NHTSA closes Ford F-150 EcoBoost acceleration probe

Typically when we report on the findings of an investigation from the National Highway Traffic Safety Administration, it's because the government body has discovered a safety issue and prescribed a recall. In this case, however, NHTSA has closed an investigation into a reported performance deficit without ever getting to the recall stage.
The issue revolves around the Ford F-150 - specifically those equipped with the 3.5-liter EcoBoost engine - of which some 360,000 were built in the 2011, 2012 and 2013 model years. After receiving an initial 95 complaints, NHTSA opened an investigation last May - almost a year ago - into the reported issue of reduced engine power under hard acceleration. The agency has since received a total of 525 such complaints, and Ford itself reported receiving over 4,000.
Together, NHTSA and Ford determined that the problem resulted from cylinders misfiring, an issue itself stemming from water getting into the charge air cooler (CAC) mated to the turbochargers. In particularly humid or rainy conditions, water was found to get into the CAC, causing some of the cylinders to misfire, which in turn triggered the ECU to disable those cylinders in order to protect the catalytic converter from damage.