1968 Ford Torino Gt on 2040-cars

Auto blog

Ford recalls 1.3 million Fusions, MKZs: Steering wheels could come off

When driving a car, the steering wheel is only expected to move in a rotational fashion, either clockwise or counter-clockwise. When it moves in some other direction, something is wrong, and when it moves the wrong way enough that it is no longer attached to the steering column, that's a really, really bad thing. And apparently, according to a recall issued by Ford, there are over 1.3 million Ford Fusions and Lincoln MKZs that are at risk of this happening. And at least two accidents and one injury have been attributed to the issue. Ford says the problem is that the steering wheel bolt that keeps the wheel attached to the column might not provide enough torque, resulting in the bolt slowly loosening and working its way off the column. The good news is that the fix is really simple. Ford will install a larger bolt with more threads along with a larger nylon patch to keep it all locked down. The fix is completely free to owners. Cars affected by the recall include 2014 to 2017 Fusions built built at the Flat Rock plant in Michigan between August 6, 2013, and February 29, 2016. Model year 2014-2018 Fusions and MKZs built at the Hermosillo factory in Mexico are also affected. So if you have one of those sedans, please get in touch with your local dealer to have the issue addressed. Related Video:

How the Ford F-150 SVT Raptor became a reality

The camouflaged Ford F-150 SVT Raptor prototype captured above blazing its way across the desert during a test run left company engineers giggling in amazement, reveals Jamal Hameedi in a new Autoweek video. Ford's global performance vehicle chief engineer, accompanied by senior exterior designer Bruce Williams, sat down with the publication to discuss the concept and development of the automaker's super off-road F-150.
Designing a high-performance pickup in 2008, right when the cost of gasoline was going through the roof, seemed insane at the time, but the team pushed forward with the innovative vehicle regardless. The interview includes plenty of Ford B-roll footage as visual candy, and the conversations include discussions about exterior design, ride comfort, anti-lock brake tuning, suspension engineering, weight reduction and why it was necessary to make the Raptor visually different than Ford's standard F-150. The model's origin story is very interesting, and you can learn more about it by watching the video below.

Lincoln recycling tree fibers into new MKX armrest

Want to hug a tree, or at least a really small part of one. Then set your arm down on one of those armrests in the 2014 Lincoln MKX crossover. The US automaker is working with Weyerhaeuser and Johnson Controls on a tree-based, cellulose-reinforced polypropylene material used in the component that connects the armrest to the floor console, Wards Auto says. With properties similar to plastic, the tree-based material replaces fiberglass and is about six percent lighter. No big deal for now, but if the material starts getting used for things like battery trays and interior storage covers, that loss in weight may eventually start adding up enough to boost fuel economy a bit, providing a green double bonus. Lincoln parent Ford, which isn't saying how much more (or less?) it costs to use the new material, established its Biomaterials and Plastics Research team in 2001. In 2007, the company began using soy-based foam in car seats used for models such as the Lincoln Navigator and Ford Mustang and has since broadened biomaterials use to components like floormats and cupholder inserts. Ford also used recycled plastic bottles from the 2012 North America International Auto Show for seats in the Focus Electric.