2013 Ford Taurus Limited on 2040-cars

Auto blog

Who sold the most heavy-duty pickups in 2012? PickupTrucks.com investigates

Domestic manufacturers enjoyed a good year for heavy-duty pickup sales in 2012. PickupTrucks.com has taken a close look at exactly how those sales broke down between each manufacturer and between three-quarter and one-ton pickups. Ford sold some 67,786 F-250 Super Duty models last year with the Chevrolet Silverado 2500 HD falling just behind at 56,359 units. The Ram 2500 HD came in third at 41,918, while the GMC Sierra 2500 HD earned itself fourth place with 27,616 deliveries. While Ford held onto the top spot in the one-ton market, Ram easily nailed down second place by selling more 3500 HD models last year than General Motors sold Silverado 3500 HD and Sierra 3500 HD trucks combined.
So, did GM manage to sell more trucks than Ford with its two brands? Very nearly. Ford sold a total of 119,338 heavy-duty pickups to GM's 111,555. Ram, meanwhile, moved a distant 77,583. But perhaps more interesting is the diesel take rate in this segment. PickupTrucks.com says 80 percent of all domestic one-ton trucks roll from the dealer lot with a turbo-diesel under the hood. Head over to the site for a closer look at the breakdown.

Ford Mustang Mach-E fails Sweden's moose test

The infamous moose test has claimed another casualty. This time it's the Ford Mustang Mach-E AWD Long Range, which was tested in an electric four-way alongside the Tesla Model Y, Hyundai Ioniq 5 and Skoda Enyaq iV (an electric utility vehicle closely related to the Volkswagen ID.4 that is sold in the United States). According to the Swedish testers at Teknikens Varld, Ford's electric car not only failed to hit the speed necessary for a passing grade, it didn't perform well at slower speeds, either. To pass the outlet's moose test, a car has to complete a rapid left-right-straight S-shaped pattern marked by cones at a speed of at least 72 km/h (44.7 miles per hour). The test is designed to mimic the type of avoidance maneuver a driver would have to take in order to avoid hitting something that wandered into the road, which in Sweden may be a moose but could just as easily be a deer or some other member of the animal kingdom elsewhere in the world, or possibly a child or car backing into the motorway. Not only is the maneuver very aggressive, it's also performed with weights belted into each seat and more weight added to the cargo area to hit the vehicle's maximum allowable carrying capacity. The Mustang Mach-E only managed to complete the moose test at 68 km/h (42.3 mph), well below the passing-grade threshold. Even at much lower speeds, Teknikens Varld says the Mach-E (which boasts the highest carrying capacity and was therefore loaded with more weight than the rest of the vehicles tested in this quartet) is "too soft in the chassis" and suffers from "too slow steering." Proving that it is indeed possible to pass the test, the Hyundai and Skoda completed the maneuver at the 44.7-mph figure required for a passing grade and the Tesla did it at 46.6 mph, albeit with less weight in the cargo area. It's not clear whether other versions of the Mustang Mach-E would pass the test. It's also unknown if Ford will make any changes to its chassis tuning or electronic stability control software, as some other automakers have done after a poor performance from Teknikens Varld, to improve its performance in the moose test. Related video:

Ford F-150 production hampered by frame shortage

If anyone has questions about how Ford's new aluminum-bodied F-150 will hold up, it's not buyers. Orders are so strong for the fullsize pickup that competitors General Motors and Ram are discounting their offerings to hold onto market share. It's a shame for the Blue Oval then, that it can't build all the trucks it needs because frame supplier Metalsa isn't delivering enough frames. Neither Ford nor Metalsa has said what the problem is, but Ford employees are at Metalsa's Kentucky plant trying to get it sorted out, Automotive News reports. Overtime shifts at the Dearborn Truck Plant and the Kansas City Assembly Plant have been canceled due to the shortage that's been a problem for at least two months now. The issue is exacerbated by this being the changeover period in production from the old model to the new, which comes with its own issues. That would help explain why even though Dearborn production finished ramping up in January, output in April was down 9.2 percent compared to last year, according to AN. Transaction prices are up for the new truck, but overall F-150 production in Q1 was down 40 percent, and missing product means missing profits. Combined with the production drop for the new Ford Edge, the company's Q1 bottom line was robbed of $1 billion. It isn't clear when the frame issue will be solved, but workers at the plants are ready to run "all-out" when it is. Related Video: News Source: Automotive News - sub. req.Image Credit: Copyright 2015 Drew Phillips / AOL Plants/Manufacturing Ford Truck kansas city assembly plant