1984 Ford Ranger 4wd on 2040-cars

Auto blog

Want a V8 on the cheap? Buy a work truck

In case you didn't notice, V8 cars have gotten pretty expensive. If you want a modern muscle car like the Dodge Challenger R/T, Ford Mustang GT, or Chevy Camaro SS, you'll need between $34,000 and $38,000 for a stripped out example of one. The cheapest of those is the Challenger, and the priciest is the Camaro. These are also the cheapest V8 cars the companies offer. But if you absolutely have to have a V8 for less, there is an option, work trucks. As it turns out, all of the Big Three offer their most basic work trucks with V8s. And because they're so basic, they're pretty affordable, especially when sticking with the standard two-wheel drive. A Ram 1500 Tradesman with a V8 can be had for as little as $29,840, which is a little more than $4,000 less than a Challenger R/T. For a bit more at $30,275, you can have a Chevy Silverado W/T, almost $8,000 less than a Camaro SS. The most expensive is the V8 Ford F-150 starts at a starting price of $30,670, which is a bit over $5,000 less than the Mustang. Of course you'll be in an ultra bare bones vehicle with few comforts, and the price will go up if you add stuff, but we're bargain hunting here, and sacrifices are sometimes necessary. Besides, what you lose in comfort, you gain in loads of cargo space and towing (try to look at the bright side). Also, as a side note, all three trucks are available with optional electronic locking rear differentials. At the discounted price of these trucks, you still get a heaping helping of power. The most potent of the trio is the Ram 1500 Tradesman with 395 horsepower and 410 pound-feet of torque generated by a 5.7-liter V8. Compared with the Challenger R/T, the Ram is up by 20 horsepower and they're tied for torque. The value proposition is even more stark between the two vehicles when looking at the price per horsepower. Each pony in the Ram costs $75.54, while the Challenger charges you $90.91. The Challenger is also more expensive per horsepower than its close competitors. The F-150's 5.0-liter V8 is just barely behind the Ram with 395 horsepower and 400 pound-feet of torque. That's still more power than the Challenger, and it matches the torque of the 2017 Mustang GT. On the down side, it still would be down 20 horsepower on that same 2017 Mustang, and it's behind by 60 horsepower and 20 pound-feet on the new 2018 Mustang GT. The F-150 also just edges out the Mustang in the dollar per horsepower measure.

Why 2015 is going to be a huge year for trucks

Nissan chief executive Carlos Ghosn took center stage to introduce the 2016 Titan last week at the Detroit Auto Show. He spoke of the truck's new features, impressive Cummins V8 diesel engine and the extensive amount of time and money required to build a modern, competitive pickup truck. "We have done all of this because we see opportunity – an opportunity in the unmet needs of today's American truck customers," Ghosn said. He was speaking about the Titan, but his thoughts echo the industry's mindset: When it comes to trucks, find an opportunity and attack. Even with CAFE regulations looming and fickle consumer preferences, investing in trucks is a no-brainer for automakers. Some consumers will always need a truck for their job or lifestyle. And some people will always want one, whether they need it or not. With that in mind, here are four reasons why the pickup-truck sector is more important than ever and poised for growth in 2015. View 24 Photos The Nissan Titan Is Back Okay, it never left, but the Titan hadn't been redesigned since its launch in 2003, and Nissan sold more NV200s than Titans in 2014. It's an understatement to say the truck was languishing. That all changes with the 2016 model. The Titan will come in two variants, a traditional fullsize competitor and the Titan XD. The XD will lead the market launch, and it arrives late this year. It's pitched as a "whitespace" offering, Nissan sales and marketing vice president Fred Diaz said. The idea is to offer something in the general size and price range of a fullsize truck, but also have some of the capability of a heavy-duty truck. The XD uses a fully boxed ladder frame, the chassis design from Nissan's commercial division, and the wheelbase is about 20 inches longer than other Titan models. The XD, which Nissan is calling the flagship of the line, will be the only model with the 5.0-liter Cummins turbodiesel V8. It produces 310 horsepower and 555 pound-feet of torque, while being able to tow 12,000 pounds. V6 and V8 gasoline models will also be offered on the Titan XD and the standard, non-XD model. When production ramps up, the Titan will be sold with several cabs, beds and trims. New features include trailer sway control, an integrated trailer brake controller, more storage options in the cabin and even laminated front and rear side glass to reduce outside noise. All of this has given Nissan fresh confidence in an area where it admittedly has been lacking. "We can compete," Diaz told Autoblog.

2016 Ford Shelby Mustang GT350R First Ride

Ford Performance Chief Engineer Jamal Hameedi was in China when he received an interesting text. Half a world away his team was shaking down the newest Shelby Mustang at Grattan Raceway in rural Michigan. The news was encouraging. The GT350R was keeping pace with a Porsche 911 GT3, even nosing ahead of it during time trials, while the GT350 was running about even with a 911 Carrera S and a Chevy Corvette Stingray. "That was a good text to get," he recounted a week later as we chatted alongside the track at Grattan. On this scorching summer day, there were no Porsches or Stingrays to be found, but we've come to preview the track-focused GT350R. Ford drivers are at the wheel, and we're riding shotgun. After several hot laps, we're left with a predictable observation: The GT350R is wicked fast and quick as hell. Much of this is thanks to the 5.2-liter flat-plane crank V8 that pumps out 526 horsepower and 429 pound-feet of torque. It's the most powerful naturally aspirated road-legal engine in Ford's 112-year history. To help the engineering process, Ford bought a Ferrari 458 Italia and ripped apart its V8. The GT350's engine ended up being 10 pounds lighter. For the coup d'grace, Ford's mill also revs to a Ferrari-like 8,250 rpm. As formidable as all of that looks on paper, it sounds even more imposing in real life (see the related video below). The engine in our GT350R crackles, growls, and opens up to a flat-out roar as we explode onto the track, gripping the door pulls to calm our nerves. Grattan is a challenging, twisty course. The corners are tight, and the elevation changes quickly. At one point, our test driver aggressively tackles a curve and we're briefly airborne. During the first stint, we reach about 140 miles per hour. But the GT350R isn't about straight-line speed or pure power. It's designed to get around a track as rapidly as possible. That means Ford took the 'base' GT350 – which should be more than at home on the track itself – and re-tuned the suspension and aerodynamics. There's a larger front splitter and rear carbon-fiber spoiler. The 19-inch carbon-fiber wheels are stiffer and lighter than comparable aluminum rollers, and they're wrapped in Michelin Pilot Sport Cup 2 high performance rubber. Additionally, Ford ripped out the back seats, air conditioning, trunk floorboard, stereo, backup camera, and anything else that wasn't necessary.