2014 Navigation Sunroof Leather Heated Cooled V8 Power Stroke Diesel on 2040-cars

Auto blog

Ford recalls 90,736 vehicles due to engine valve issue

Ford will recall 90,736 vehicles as engine intake valves in the vehicles may break while driving, the National Highway Traffic Safety Administration (NHTSA) said on Saturday. The recall impacts certain 2021-2022 Bronco, F-150, Edge, Explorer, Lincoln Nautilus, and Lincoln Aviator vehicles equipped with either a 2.7L or 3.0L Nano EcoBoost engine, the NHTSA said. According to documents posted by NHTSA and sourced from the automaker, "The engine intake valves may break while driving, which can result in engine failure and a loss of drive power." Following an investigation that started in January, 2022, Ford found 22 instances where "the engine intake valves fractured and fell into the combustion chamber of the engine causing catastrophic engine damage." The automaker's analysis continues: "Ford identified that the potential root cause of the failures was engine intake valve failure due to valves that exceeded the designed specification for hardness, were brittle, and more likely to fracture. Ford determined that this was due to the supplier’s grinding processes and the sensitivity of the intake valve material to grinding processes that were not within control specifications. The intake valve material was changed for vehicles produced after October 31, 2021." Fixing the problem will require replacement of the entire engine. "Dealers will inspect each vehicle to determine its cumulative number of engine cycles. For vehicles that do not meet the engine cycle threshold, dealers will accumulate high revolutions per minute (rpm) engine cycles per a service procedure. Engines will be replaced on vehicles that do not pass the engine cycle accumulation," Ford says.

Ford Fusion production scaled back just 3 months after it was accelerated

Three months after kicking off production of the Ford Fusion at its Flat Rock, MI factory, Ford Motor Company is taking steps to trim output in the face of heavily discounted competition from Toyota and a growing supply of vehicles.
The addition of Fusion production in Flat Rock - which also builds the Mustang - was meant to be what pushed the handsome mid-sizer past its arch-nemesis, the Toyota Camry. An extra facility building Fusions was also meant to curb the growing demand for Ford's highly profitable sedan.
But with word that Flat Rock would take "approximately" one extra week off for the holidays combined with an 88-day supply of Fusions - reportedly due in no small part to what Morgan Stanley analyst Adam Jonas called "aggressive discounting of the Camry" - some analysts are now beginning to wonder if Ford may have overextended itself by adding a second Fusion facility to the mix.

NHTSA investigating 250k F-150s for possible power brake failure

The National Highway Traffic Safety Administration is opening a preliminary evaluation into the 2011-2012 Ford F-150 with the 3.5-liter EcoBoost V6 because of potential failure of the power braking assist. If a recall is required, it could affect an estimated 250,000 of the trucks. This investigation is prompted by NHTSA receiving 32 complaints about the electric vacuum assist pump allegedly failing in these trucks, which then causes the power braking assist to stop working. Drivers claim having no warning beforehand. There are also two reports of crashes that are purportedly linked to the problem, but the government agency lists no injuries. According to NHTSA, the issue may be getting worse because 60 percent of these allegations are from the past nine months. A preliminary evaluation doesn't necessarily lead to a recall, though. NHTSA uses them "to assess the cause, scope and frequency of the alleged defect." Ford spokesperson Kelli Felker tells Autoblog: "We will cooperate with NHTSA on this investigation, as we always do." Related Video: INVESTIGATION Subject : Brake Vacuum Pump Failure Date Investigation Opened: JUN 22, 2015 Date Investigation Closed: Open NHTSA Action Number: PE15026 Component(s): SERVICE BRAKES, ELECTRIC , SERVICE BRAKES, HYDRAULIC All Products Associated with this Investigation Vehicle Make Model Model Year(s) FORD F-150 2011-2012 Details Manufacturer: Ford Motor Company SUMMARY: The Office of Defects Investigation (ODI) has identified 32 complaints alleging electric vacuum assist pump failures resulting in loss of brake power assist and increased brake pedal effort in model year (MY) 2011-2012 Ford F-150 full-size pickup trucks equipped with 3.5L GTDI engine. None of the complaints reported any warning indicators to alert the driver of brake power assist loss or the potential of increased stopping distance. Two reports alleged crashes due to increased brake pedal effort required to stop or slow the vehicle. The complaints show an apparent increasing trend, with approximately 60 percent of complaints received within the past nine months. A Preliminary Evaluation has been opened to assess the cause, scope and frequency of the alleged defect.