1934 Ford Pickup Hot Rod Rat Rod Kustom 428 Cobra Jet L@@k!!! on 2040-cars
Ogden, Utah, United States
|
This is true head turner! This truck has hot rod, rat rod, and just plain bad a$$ written all over it. It started life as a 1934 Ford pickup, the truck had spent quite a bit of time in California. It was brought over to Utah about 30 years ago and has had the same owner for the last 25 years. This rocket is powered by a super rare 1968 factory ford 428 Cobra Jet with an underrated 345 horsepower. This one has the factory tri power set up, cool look and not to mention this thing runs! It's been down the 1/4 mile once and clocked a 12.9 at 108, and that's up here in Utah at about 4500 feet above sea level. That's around an 11 second ride at sea level!! This truck get's up and hauls the mail. It's backed by a borg warner 4 speed manual transmission that shifts well. The rear end is a 9" out of a 57 ford. This truck was just refreshed with custom hot rod flatz flat black paint, the bed is a custom set up, there is the perfect amount of chrome to set this one apart. It's a true hot rod, with a 4" dropped axle, manual steering and brakes, which all functions as it should. This truck can't go anywhere without a crown gathering! This is an absolute blast to drive and will take you back to a time when no frills speed was all the rage. This is a timeless classic and will make the new owner very happy!
I am listing this truck for the current owner, who has had it for the last 25 years. I am a licensed and bonded dealer, happy to take trades of all sorts, I also can help arrange shipping for you, provide more photos/video. I am here to help you make this purchase! I do not offer financing. X-treme Motors 2496 s 1900 w Ogden Utah 84401 DLR 7397 Contact Skyler 801-499-2124 or email through ebay and I'll get back to you asap! |
Ford Other Pickups for Sale
1948 ford f1 truck asheville, nc(US $2,995.00)
F550 xl powerstroke diesel 11' morgan reefer van body thermo king - we finance!(US $34,975.00)
1941 ford snubnose
Powerstroke diesel xl 8' altec service body utility 37.5' bucket 4x4 we finance(US $32,950.00)
1940 ford pickup, pro street / show, blown 555 cu in, $250,000 build cost!(US $200,000.00)
2012 ford f550 rollback
Auto Services in Utah
West Motor Co ★★★★★
Utah Auto Gallery ★★★★★
Turn Key Service Tech ★★★★★
Stevens Electric Motor Shop ★★★★★
South Towne Collison ★★★★★
Roses Auto Body ★★★★★
Auto blog
The 1965 Ford Mustang could have looked a lot different
Fri, May 8 2020The 1965 Ford Mustang is unquestionably an automotive design icon, and nearly every generation of Mustang has some connection to that original car. Because it's such a universally-known vehicle, we were amazed to see all the different designs that were being considered. Head of Ford's archives Ted Ryan recently shared photos of design proposals for the original Mustang on Twitter that he and Jamie Myler found, and we reached out to them to find out more. As Ryan initially noted, the photos were taken on August 19, 1962, and they are proposals for the Ford Mustang. Apparently Ford had committed to doing a Falcon-based youth-oriented car at this point, and it did have plans to launch the car in 1964 for the 1965 model year. But after having little success with early design proposals, the company asked all of its design studios — the Advanced Studio, Lincoln-Mercury Studio and Ford Studio — to submit proposals. With only about two years before the planned launch, Ford was understandably short on time, and it's believed that the studios only had a month to create and present these designs. Lincoln-Mercury design proposal View 8 Photos The majority of the designs, a total of five, came from the Advanced Studio, and part of this was because they already had a couple of concept designs in reserve it could present. Two other models representing three design possibilities came from Lincoln-Mercury, and just one model with two options came from Ford. The Advanced Studio proposals are shown in the gallery at the very top of this article, and the Lincoln-Mercury and Ford proposals are in the gallery directly above this paragraph. The Advanced Studio's most radical design is the one that was clearly related to the Mustang I concept that would be shown later that year with huge wraparound rear glass, turbine-inspired bumpers and enormous side scoops. The other proposals from the studio were more conservative, featuring simple lines, grilles reminiscent of the Falcon, and one even borrowing the jet-thruster-style taillights made famous on the Thunderbird. Lincoln-Mercury had some impressively bold designs, particularly its fastback that had buttresses to extend the shape all the way to the tail. This car had two different side trim possibilities. The other Lincoln-Mercury design was toned down a bit, but had two interesting possibilities for side detailing, as well as some crisp, low-profile tail fins.
Recharge Wrap-up: Ford HQ gets giant solar array, Chevy City Express gets 24 MPG city
Sat, Aug 16 2014Ford will be building Michigan's largest solar array at its Dearborn headquarters. With funding from DTE Energy, the solar carport will provide covered parking, as well 30 charging stations for electric vehicles. The array is expected to generate 1.13 million kWh per year for Ford's operations, and offset 794 metric tons of carbon emissions. Read more in the press release below. Chevrolet announced the fuel economy for the 2015 City Express, at 25 mpg combined. The cargo van is rated at 24 mpg in the city, and 26 mpg on the highway. Chevy credits the van's inline four-cylinder engine and continuously variable transmission for its impressive city mileage. For its customers - which are mainly businesses - "The fuel economy of the City Express will help stretch their dollar at the pump and give them the flexibility to invest the savings back into their business," says Chevrolet's Ed Peper. The City Express starts at $22,950. Read more in the press release below. Engineers at the University of Wisconsin have developed an efficient engine that runs on a diesel-gas blend. The engine, which uses a computer to control the blend proportions, is about 15 percent more efficient than the any diesel engine according to mechanical engineering professor Rolf Reitz. The team has put the experimental reactivity controlled compression ignition (RCCI) engine in a demonstration car - a 2009 Saturn. "This vehicle can do 50 miles per gallon," says Reitz, who believes the system could be improved further. Read more at Wisconsin Public Radio. The Southeast Alternative Fuel Conference and Expo will take place in October in Raleigh, North Carolina. Held at the NC Clean Energy Technology Center from October 22-24, the event will feature a variety of exhibitors, speakers and, most importantly, alternatively powered vehicles. "The three day conference will be a one-stop shop for fleet and transportation related decision makers to learn about return on investment, efficiency and alternative transportation fuels such as biodiesel, electricity, ethanol, propane and natural gas," says Anne Tazewell of the NC Clean Energy Technology Center. If you can't make it to Raleigh for the Expo, you can still enter to win a free two-year lease of a Nissan Leaf at the Center's website. Learn more about the event in the press release, below.
Three automotive tech trends to watch in 2018 and beyond
Thu, Dec 28 2017Every year, technology plays a bigger and bigger role in the auto industry. To put things in perspective, 10 years ago iPod integration and Bluetooth were cutting-edge in-car innovations, and smartphones and apps weren't yet a thing since the first iPhone was only about six months old. And I can't recall anyone talking about autonomous cars. Compare that to today, with mainstream coverage of the auto industry dominated by autonomous technology, along with electrification and almost every move made by Tesla. These three topics were the most significant trends of car tech in 2017 and I believe they will continue to shape the auto industry in 2018 and beyond. Let's examine them. Full Autonomy Gets Closer to Reality While there were many developments this year that indicate we're inching closer to fully autonomous vehicles, I was behind the wheel for hours to witness one of them. In October I had the chance to test Cadillac Super Cruise on a 700-mile, 11-hour drive from Dallas to Santa Fe – and had my hands on the wheel for maybe 45 minutes max throughout the entire trip. Super Cruise is far from making the Cadillac CT6 or any GM vehicle fully autonomous, and has limitations such as functioning only on pre-mapped main highways. While it simply adds a layer of lane centering to adaptive cruise control, the technology will go a long way in making mainstream drivers more comfortable with letting machines take over. On a separate front, GM is pushing ahead with fully autonomous vehicles and announced last month that it plans to launch of fleets of self-driving robo-taxis in several urban areas in 2019. While most automakers are also in the race to make autonomous cars a reality, GM's turbocharging of its efforts appeared to be in response to Waymo, which announced just weeks earlier that its Early Rider Program in the Phoenix area would go completely driverless. The Early Rider Program launched last April, offering the public a chance to ride in Waymo's autonomous Chrysler Pacifica minivans. In this new phase of testing, Waymo is using its own employees as guinea pigs instead of the public while the vehicles operate without a human behind the wheel, and takes another giant step forward for fully autonomous driving.













