2013 Ford Mustang Gt on 2040-cars

Auto blog

Ford recalls 600,000 older-model sedans for braking issue

Ford is recalling 600,166 older-model Ford, Lincoln and Mercury vehicles over an issue that could affect braking and increase the risk of a crash. The safety recall covers certain Ford Fusion, Mercury Milan and Lincoln MKZ sedans from the 2006 through 2010 model years that were built at Ford’s Hermosillo Assembly Plant in Mexico between Feb. 22, 2006, and July 15, 2009. Ford says a valve that is normally closed inside the hydraulic control unit may get stuck in the open position or be slow to close, which could make it harder to engage the brakes and increase risk of a crash. Ford says itÂ’s aware of 15 reports of accidents and two injuries possibly related to the issue. Dealers will inspect the hydraulic control unit for signs of the problem and replace it, if necessary. The dealers will pressure-flush the system with brake fluid and replace the reservoir cap with a new one. Ford is also issuing a small recall of 33 of its 2020 F-150 trucks in the U.S. and 51 in Canada over potentially damaged spare tires. It says the bead area on the tires may have been damaged when it was mounted onto the wheel assembly, leaving it vulnerable to corrosion, separation of the bead wire and ultimately a rapid loss of air pressure and detachment from the wheel. Dealers will replace the spare tire. Affected vehicles were built at the Dearborn Truck Plant from Nov. 10-21 of this year.

Ford Mustang, F-150, Expedition, and Lincoln Navigator recalled

The Basics: Ford will recall 201,900 examples of the 2011-2012 F-150, 2012 Expedition, 2012 Mustang, and 2012 Lincoln Navigator. The affected vehicles have the 6R80 transmission. Of the total, there are 84,000 of them in the United States and 17,900 in Canada. The Problem: The output speed sensor on the vehicle's transmission lead frame can force the gearbox to downshift into first gear. If this happens at high speed, it could cause the rear tires to slide or lock up. Injuries/Deaths: There are no reported injuries, but Ford know of three accidents related to this problem. The Fix: Dealers will update the powertrain control module software to eliminate the problem, and they'll also replace the transmission lead frame. If You Own One: Ford will begin notifying affected customers by mail on May 23. Related Video: FORD MOTOR COMPANY ISSUES THREE SAFETY RECALLS AND TWO SAFETY COMPLIANCE RECALLS IN NORTH AMERICA DEARBORN, Mich., April 27, 2016 – Ford Motor Company is issuing three safety recalls and two safety compliance recalls in North America. Details are as follows: Ford issues safety recall and customer satisfaction program for certain 2011-2012 Ford F-150, and 2012 Ford Expedition, Ford Mustang and Lincoln Navigator vehicles in North America to update powertrain control module software and inspect for certain diagnostic trouble codes Ford is issuing a safety recall for approximately 202,000 2011-2012 Ford F-150, and 2012 Ford Expedition, Ford Mustang and Lincoln Navigator vehicles for a potential issue with the output speed sensor on the vehicle's transmission lead frame. Under certain conditions, the transmission controls could force a temporary downshift into first gear. Depending on the speed of the vehicle at the time of the downshift, the driver could experience an abrupt speed reduction that could cause the rear tires to slide or lock up. This condition could result in loss of vehicle control, increasing the risk of a crash. Ford is aware of three reports of accidents and no injuries related to this condition. Affected vehicles are equipped with a 6R80 transmission and include certain 2011-2012 Ford F-150 vehicles built at Dearborn Truck Plant and Kansas City Assembly Plant, Aug. 19, 2011 through March 9, 2012; 2012 Ford Expedition vehicles built at Kentucky Truck Plant, Aug. 19, 2011 through Dec. 19, 2011; Ford Mustang vehicles built at Flat Rock Assembly Plant, Aug. 19, 2011 through Feb.

The tricky business of octane, power, and MPG

Given tepid green-car sales numbers this year, consumers in the US aren't making the transition away from internal combustion engines too quickly. Regulations are still mandating cleaner emissions, though. In addition to downsizing and turbocharging, there's growing consideration about moving to higher-octane fuel to improve overall efficiency. In a new report, engineers at FCA, Ford and General Motors Powertrain are showing that it could work, too. The major advantage to higher-octane fuel is that it supports higher compression ratios. That in turn can lead to more power from burning the same amount of gas. "Higher ethanol content is one available option for increasing the octane ratings of gasoline and would provide additional engine efficiency benefits for part and full load operation," the researchers write in the study's abstract. The authors even think it could be possible to update some modern vehicles' engine calibration to be optimized for the better gas. While the benefits are there, we still have a long way to go before higher-octane fuel becomes a national standard. According to Green Car Congress, 87 percent of the gas sold in the US is regular grade 87-octane. Meanwhile, premium 91-93 octane makes up just 10 percent. The various grades of fuel illuminate even more annoyances with the current system. For example, Ford generally recommends 93-octane for EcoBoost engines, and the power outputs that the company publishes are based on using it. However according to Green Car Reports, such premium gas is very difficult to find in some regions of the US, especially along the West Coast. The powertrains still run on lesser grades but with lower power output. The researchers' discussion of possibly increasing ethanol in gas also comes during a heated debate on the substance. The current administration is pushing for less of the corn-based fuel in the coming years. Although, several presidential hopefuls might be favor of reversing that course.