2008 Ford Mustang Shelby Gt500 on 2040-cars

Auto blog

Ford unveils its facelifted Falcon finale with new XR8

While its days may be numbered, Ford isn't just going to let its Falcon sedan limp out for the Australian market. No, the Blue Oval is releasing a refreshed Falcon for its final years, and it's lead by this, the new XR8. That's right, this dead-car-driving is going to go out on a high note.
Ford's global design DNA dominates the looks of the new Falcon, with a grille reminiscent of the US market Fusion and the European-market Mondeo. The headlights aren't a straight port, and boast their own unique LED running light pattern (at least on the XR8), but the overall look is strikingly similar. Out back, LED taillights highlight the rear of the Faclon. Despite the substantial new fascia, this is still a mid-cycle refresh. That means most of the rest of the Falcon's body panels are carryovers from the current model.
The XR8 model, shown above, arrives with a supercharged V8, allegedly displacing 5.0 liters. Unfortunately, details on the Falcon's mechanicals are in remarkably short supply. Ford has committed to a range of turbocharged four, as well as turbocharged and naturally aspirated six-cylinders, in addition to the V8, although specifics on those mills aren't available.

Again? Ford issues second 2015 Fusion and Lincoln MKZ seat belt recall

In 2016, Ford issued a recall for 603,392 2013-2016 Fusions and 2013-2015 Lincoln MKZs due to potentially faulty seat belts. Apparently, that wasn't the end of it. Ford announced another recall this week for the same issue, this time covering 108,399 2015 Fusions and MKZs.  In both cases, the seat belt anchor pretensioners are the issue. According to Ford, "increased temperatures generated during deployment of the driver or front-passenger seat belt anchor pretensioner could degrade the tensile strength of the cable below the level needed to restrain an occupant." Basically, heat could weaken the seat belts, and in extreme cases, they wouldn't be able to keep up proper safety standards. Ford knows of at least one injury that has occurred due to this issue.   The recall includes 103,374 vehicles in the United States, 4,002 in Canada, and 1,023 in Mexico. Possibly affected Fusions were built at Ford's Flat Rock Assembly Plant between August 1, 2014 and January 30, 2015. The MKZs were built at the Hermosillo Assembly Plant between August 1, 2014 and November 21, 2014.  As a fix, Ford says dealers will add an extra coating to the seat belt pretensioner cable for protection from the heat. If this recall might affect your vehicle, call your local Ford dealership and use recall reference No. 19S25. This news comes after Ford recalled 1.3 million Fusions and MKZs in 2018 due to the possibility that the steering wheels could fall off. Fusions have also been recalled due to the risk of rolling away.

2015 Hennessey Ford Mustang hits 207.9 mph

After hitting over 195 miles per hour a few months ago, John Hennessey was barely out of his personal HPE700 Mustang before he said that 200 mph was achievable. Don't doubt a man who knows a ton about taking cars to insane speeds. With the new HPE750 Mustang, he and his customers can finally surpass the 200-mph mark in their cars. "If at first you don't succeed, just add more horsepower and rpm and try again," Hennessey said in the company's announcement. Rather than the 717 horsepower and 632 pound-feet of torque from the supercharged 5.0-liter V8 in the HPE700, the HPE750 ratchets the same powertrain up to an even more potent 774 hp and 648 lb-ft. In a real show of confidence, the Hennessey team brought along Jay Leno when it returned to the Continental Tire Proving Grounds in Uvalde, TX, to set a new top speed with the HPE750. The upgrades to the Mustang definitely paid off because the pony car reached a GPS-verified 207.9 miles per hour down the straight. The run will eventually appear on a segment on the upcoming Jay Leno's Garage TV show that will air CNBC. Prices for the HPE750 start at $59,500 USD, including the base 2015 Mustang GT, but building an exact replica of this one would cost $69,374, according to Hennessey. In addition to the huge top speed, the company claims that the coupe can reach 60 mph in 3.4 seconds and cover the quarter mile in 10.9 seconds. 774 HP Hennessey Mustang Tested to 207.9 mph Jay Leno visits Texas tuner for upcoming TV series on CNBC June 2, 2015 Uvalde, Texas—On Wednesday, May 27, 2015, professional driver, Brian Smith, drove the Hennessey HPE750 Supercharged Mustang to a top speed of 207.9 mph. In the process, Hennessey's potent pony car became the first 2015 Mustang to break the 200 mph mark. Jay Leno was on hand to witness the record speed while filming an upcoming episode of Jay Leno's Garage, which will air on CNBC later this year. The run was made on the 8.5 mile high speed oval at the Continental Tire Proving Grounds located in Uvalde, Texas – the same test track where John Hennessey test drove the company's HPE700 Mustang to a top speed of 195 mph back in February of this year. During both tests, speeds were validated with Racelogic's VBox 3i GPS data logging system. "If at first you don't succeed, just add more horsepower and rpm and try again," said company founder and president, John Hennessey.