1972 Mustang Convertible on 2040-cars

Auto blog

Check out Ford's fully automated self-parking car [w/video]

As automakers continue to find uses for autonomous and semi-autonomous vehicle technology, Ford of Europe has announced that it is developing a self-parking system for future use. More advanced than the Active Park Assist already offered in many Ford products, the new Fully Assisted Parking Aid can take full control of the vehicle and can navigate angled and perpendicular parking spots.
While today's Active Park Assist can only parallel park with the driver controlling the gas, brake and gear selection, Fully Assisted Parking Aid can operate steering, gas, brake and gear selection all while making sure the car is properly parked in the intended space. As with APA, the driver pushes a button to make the car look for a proper spot (at speeds of up to 18 miles per hour), and when an adequate space is located, the operator pushes another button (either inside the car or outside via remote control) for the car to park itself - the button must be pressed throughout the whole parking maneuver. Even though Ford says that the car can effect gear selections on its own, the system must still start from Neutral, and the automaker isn't saying whether the car can put itself into Park when done or put itself in Drive when the operator is ready to go.
Ford is also taking the opportunity to announce its new Obstacle Avoidance technology. This automated system is able to detect objects - including pedestrians - in the road, warn drivers of said objects and, if needed, stop and steer automatically to avoid hitting the obstacle. Both systems are still in the prototype phase, so there is no word as to when we could see either on a production vehicle.

Ford recalling 450,000 Fusion, Mercury Milan sedans

Ford has announced a pair of recalls, and both are critical safety issues. The exponentially larger of the two recall campaigns affects over 450,000 Ford Fusion and Mercury Milan sedans manufactured at the Hermosillo plant between July 21, 2008, and March 4, 2011. The canister purge valve in the fuel tank could malfunction and could cause the top of the tank to crack and leak fuel. That could cause a fire, although Ford "is not aware of any accidents, injuries or fires" resulting from the issue. Affected vehicles will have their ECU software updated and their fuel tanks inspected for potential replacement. The company estimates there are 411,205 affected units in the United States (and its federalized territories), plus another 33,605 in Canada, and 7,055 in Mexico. The second recall affects 13 F-650 trucks. The column shifter's park position mechanism may fracture and let the truck roll away unexpectedly. Those 2016 models built in Ohio between July 29 and September 3, 2015 are all located in the US. Fixing the problem will require replacing the steering column and reconfiguring the instrument panel. FORD ISSUES TWO SAFETY RECALLS IN NORTH AMERICA DEARBORN, Mich., Nov. 23, 2015 – Ford Motor Company is issuing two safety recalls in North America. Ford is not aware of any accidents, injuries or fires related to these conditions. Details are as follows: Ford issues safety recall for certain 2010-2011 Ford Fusion and Mercury Milan vehicles in North America for potential fuel tank issue Ford Motor Company is issuing a safety recall for approximately 450,000 2010-2011 Ford Fusion and Mercury Milan vehicles for a potential issue with the fuel tank. Some of these vehicles might have a canister purge valve that does not work properly, causing internal pressure changes inside the fuel tank. Repeated pressure changes inside the tank could result in a crack on the top of the tank, possibly allowing fuel to leak. A fuel leak in the presence of an ignition source can lead to a fire. Ford is not aware of any accidents, injuries or fires related to this condition. Affected vehicles include certain 2010-2011 Ford Fusion and Mercury Milan vehicles built at Hermosillo Assembly Plant from July 21, 2008 through March 4, 2011. There are a total of approximately 451,865 vehicles that might be affected in North America, including 411,205 vehicles in the United States and federalized territories, 33,605 in Canada and 7,055 in Mexico.

2016 Ford Shelby Mustang GT350R First Ride

Ford Performance Chief Engineer Jamal Hameedi was in China when he received an interesting text. Half a world away his team was shaking down the newest Shelby Mustang at Grattan Raceway in rural Michigan. The news was encouraging. The GT350R was keeping pace with a Porsche 911 GT3, even nosing ahead of it during time trials, while the GT350 was running about even with a 911 Carrera S and a Chevy Corvette Stingray. "That was a good text to get," he recounted a week later as we chatted alongside the track at Grattan. On this scorching summer day, there were no Porsches or Stingrays to be found, but we've come to preview the track-focused GT350R. Ford drivers are at the wheel, and we're riding shotgun. After several hot laps, we're left with a predictable observation: The GT350R is wicked fast and quick as hell. Much of this is thanks to the 5.2-liter flat-plane crank V8 that pumps out 526 horsepower and 429 pound-feet of torque. It's the most powerful naturally aspirated road-legal engine in Ford's 112-year history. To help the engineering process, Ford bought a Ferrari 458 Italia and ripped apart its V8. The GT350's engine ended up being 10 pounds lighter. For the coup d'grace, Ford's mill also revs to a Ferrari-like 8,250 rpm. As formidable as all of that looks on paper, it sounds even more imposing in real life (see the related video below). The engine in our GT350R crackles, growls, and opens up to a flat-out roar as we explode onto the track, gripping the door pulls to calm our nerves. Grattan is a challenging, twisty course. The corners are tight, and the elevation changes quickly. At one point, our test driver aggressively tackles a curve and we're briefly airborne. During the first stint, we reach about 140 miles per hour. But the GT350R isn't about straight-line speed or pure power. It's designed to get around a track as rapidly as possible. That means Ford took the 'base' GT350 – which should be more than at home on the track itself – and re-tuned the suspension and aerodynamics. There's a larger front splitter and rear carbon-fiber spoiler. The 19-inch carbon-fiber wheels are stiffer and lighter than comparable aluminum rollers, and they're wrapped in Michelin Pilot Sport Cup 2 high performance rubber. Additionally, Ford ripped out the back seats, air conditioning, trunk floorboard, stereo, backup camera, and anything else that wasn't necessary.