1971 Mustang The Sexiest Body Style Ford Has Made To Date!! on 2040-cars

Auto blog

Ford E-Series chassis cabs and cutaways to survive mass Transit onslaught

In March 2013, Ford announced we'd be getting chassis cab and cutaway versions of the Transit. Since incoming Transit vans will soon be rolling over the grave of the E-Series van, it was assumed that all E-Series models would go six feet under as well. According to a report from PickupTrucks.com, however, that's not the case, the report claiming that the highly modifiable E-350 and E-450 chassis cab and cutaway versions will continue being produced in Avon Lake, Ohio "at least until 2020."
Being decades old, the be-cabbed E-Series platform has found its way under an army of heavy-duty shuttle buses, work truck and ambulances. Ford spokeswoman Jessica Enoch verified the production horizon, telling Autoblog that the particular E-Series configuration "are a higher GVWR than the Transit chassis cab and cutaway (available this summer), which is more Class 2 and a new segment for us." So there you have it.

Ford offering factory-spec EcoBoost reflashes that don't void warranty*

Buy a supercharger or cold-air kit from Ford Racing and a Performance Calibration handset comes with it to reset the ECU for the upgrade. Now Ford Racing is offering the ProCal handset a la carte for $595, allowing you to reflash the ECU on your EcoBoost-equipped ride to extract more of its inherent capabilities without any additional upgrades. It gives you control of variables such as throttle response, idle speed and turbo wastegate control, among others. As for that warranty asterisk, the press release says enthusiasts can up the power "while maintaining the Ford-backed limited warranty." However Ford Motor Co. and Ford Racing are separate entities, and, best we can tell, when you reflash the ECU, your Ford warranty gets supplanted by the Ford Racing warranty. Say you bought a 2014 Ford, that means your five-year, 60,000-mile warranty becomes Ford Racing's three-year, 36,000-mile warranty, if we're reading the fine print correctly. If you have an older car and have driven more than 36,000 miles, then your warranty options are kaput, at least as far as a Ford in-house option. If have warranty concerns, you might also want to consider having a dealer perform the reflash, or at least ask about it. Once you've got past the small print, what about the numbers? At the moment Ford Racing offers tunes for the 2.0-liter EcoBoost in the Focus ST and the 1.6-liter EcoBoost in the Fiesta ST, and we're told there's a 90-pound-foot boost in torque at the crank after you've pressed the right buttons. Anecdotal evidence from a commenter at Road & Track says he went from 252 horsepower at the flywheel to 254 hp at the wheels, and 272 lb-ft at the flywheel to 354 lb-ft at the wheels, but we can't be sure that his adjustments were within Ford Racing specs. Your mileage, naturally, may vary. What about custom numbers for the 2.3-liter EcoBoost in the 2015 Ford Mustang? They aren't ready yet, but we're told we'll get something by the end of next year. Featured Gallery 2015 Ford Focus ST News Source: Ford, Ford Racing via Car and Driver Aftermarket Ford Technology ecoboost ford focus st ford fiesta st ford racing

Now you can 3D print your favorite new Ford

Ford is letting people build their own cars, offering digital files so people can print 3D versions of their favorite models. This is way cooler than any old Matchbox or Hot Wheels toy. Ford this week started offering printable files for the F-150 Raptor, Shelby GT350R, Focus ST and Fiesta ST. Folks can order the 3D models in 1:32 scale in plastic (that'd make the mighty large pickup truck about eight inches long) but the digital files let users tweak the scale to the their liking. Once people have the digital files, they can print out their own miniature versions of the cars, made out of soft plastics, sandstone, and even some metals. Ford says it expects demand for such files to grow as sales numbers for desktop 3D printers surges to 1 million units in 2018. That's up from about 44,000 last year. Ford already offers digital files for its company logo, the 1.0-liter engine block, and two older Mustang models. But these new models take this to a totally different scale. Check out Ford's press release below. PRINT YOUR FAVORITE FORD VEHICLE AT HOME: FORD FIRST AUTOMAKER TO OPEN ONE-STOP 3D SHOP ONLINE - Consumers can now download digital images and 3D-printable files of Ford vehicles at the first-ever automaker-licensed, one-stop 3D shop online - The Ford 3D Store offers printable files of F-150 Raptor, Shelby GT350R, Focus ST and Fiesta ST; more models will become available later - Online store is powered by TurboSquid.com, the leader in providing automotive digital imaging and 3D-printable files Want to 3D-print a Shelby GT350R at home? Or would you prefer to simply purchase an F-150 Raptor 3D digital image for a presentation? How about both? Ford fans can now download digital images for Ford vehicles at the first-ever, automaker-authorized one-stop online store for 3D-printable vehicle files. The Ford 3D Store, 3d.ford.com, allows customers to use advanced technology to make their own models of Ford vehicles of the size and material they desire, or simply opt to purchase a 3D digital file from a growing library of more than 1,000 Ford images. "3D printing at home is a growing trend, and it makes sense for us to offer our customers a chance to make their own 3D Ford models," said Mark Bentley, licensing manager, Ford Global Brand Licensing.