1968 Ford Mustang on 2040-cars

Auto blog

Ford recalls over 953,000 vehicles to replace Takata airbag inflators

DETROIT — Ford is recalling more than 953,000 vehicles worldwide to replace Takata passenger airbag inflators that can explode and hurl shrapnel. The move includes over 782,000 vehicles in the U.S. and is part of the largest series of recalls in U.S. history. Included are the 2010 Ford Edge and Lincoln MKX, the 2010 and 2011 Ford Ranger, the 2010 to 2012 Ford Fusion and Lincoln MKZ, the 2010 and 2011 Mercury Milan, and the 2010 to 2014 Ford Mustang. Some of the recalls may be limited to specific geographic areas of the U.S. Takata used the chemical ammonium nitrate to create an explosion to inflate airbags. But it can deteriorate over time due to heat and humidity and explode with too much force, blowing apart a metal canister designed to contain the explosion. At least 23 people have been killed worldwide and hundreds injured by the inflators. Ford says it doesn't know of any injuries in vehicles included in this recall. Dealers will replace the inflators. Ford will notify owners about the recall starting on Feb. 18, and the company has replacement parts available for dealers to order, said spokeswoman Monique Brentley. In previous Takata recalls, parts availability had been an issue. Owners can go to this Ford website and key in their vehicle identification number to see if their cars and SUVs are being recalled. The same information will be available soon at the NHTSA recall website. More than three years after the U.S. National Highway Traffic Safety Administration took over management of recalls involving Takata inflators, one third of the recalled inflators still have not been replaced, according to an annual report from the government and a court-appointed monitor. The report says 16.7 million faulty inflators out of 50 million under recall have yet to be replaced. And 10 million more inflators are scheduled to be recalled this month, including the Ford vehicles. Safety advocates said the completion rate should be far higher given the danger associated with the inflators. The recalls forced Takata of Japan to seek bankruptcy protection and sell most of its assets to pay for the fixes. The inflators grow more dangerous as they get older because ammonium nitrate deteriorates due to high humidity and cycles from hot temperatures to cold. The most dangerous inflators are in areas of the South along the Gulf of Mexico that have high humidity. Related Video:

Shelby GT350R offers first mass-produced carbon fiber wheels

In the world of race engineering, reducing total weight is good, but reducing unsprung weight is flippin' fantastic. That's the reason Ford is pushing the envelope in terms of technology for the Shelby GT350R's wheels. Joining the likes of Koenigsegg in the offering, Ford has teamed with Australian outfit Carbon Revolution to produce the CF rollers en masse for the first time. Destined for the hubs of the new Shelby GT350R, the new hoops weigh just 18 pounds each, versus the 33-lbs weight of a similar aluminum wheel. On top of slashing up to 60 pounds in unsprung weight, there's such a reduction in rotational inertia – 40 percent, versus aluminum wheels – that Ford actually has to recalibrate the magnetic ride control system and springs. Thanks to, we're guessing, scenes of crashed Formula One cars disintegrating and spewing shards of carbon fiber all over the track, Ford seems quite keen to do away with the idea that CF is strong, but brittle. The company conducted extensive shock testing, ramming a wheel into a curb at speed. According to the Blue Oval, the lightweight wheel allowed the suspension to respond so quickly that the impact was "greatly diminished," causing the tester to run the experiment again, thinking there'd been a mistake. After recording brake rotor temperatures of 900 degrees Celsius (over 1,650 degrees Fahrenheit, or well past the point that aluminum or magnesium would melt) during testing, Ford and Carbon Revolution actually redesigned the wheels to "a thermal standard more suitable for motorsports," by adding an "incredibly thin, nearly diamond-hard coating that reliably shields the resin from heat." The same process was used to protect engine turbine blades on the Space Shuttle. While the work by Ford and Carbon Revolution should make GT350R customers excited, the work being done here could have serious implications for performance cars in the future. That's the real takeaway here, and is something that should leave fans of all performance vehicles excited.

Ford recalls Explorer and Lincoln MKC for fire hazard

The Basics: Ford will recall 5,536 examples of the 2016 Explorer and 2015-2016 Lincoln MKC. The Explorers have build dates between October 20, 2014, and January 28, 2016, at the Chicago Assembly Plant. The MKCs are from between November 25, 2013, and January 25, 2016, at the Louisville Assembly Plant. In total, there are 3,129 total affected examples of the 2015-2016 Lincoln MKC and 2,407 examples of the 2016 Ford Explorer. Of these, 1,543 are in the US and 3,993 are in Canada. The Problem: The combination of the engine block design and the block heater in these vehicles can cause the part to overheat when plugged in. Injuries/Deaths: None reported, but there are two cases of underhood fires in Canada. If you own one: Ford will begin notifying owners during the week of May 16, company spokesperson John Cangany tells Autoblog. Related Video: Ford issues safety recall for certain 2015-2016 Lincoln MKC and 2016 Ford Explorer vehicles to replace engine block heaters Ford is issuing a safety recall for approximately 5,500 2015-2016 Lincoln MKC and 2016 Ford Explorer vehicles to remove the heaters and replace them with an updated design. The engine block design, coupled with the particular block heater installed in these vehicles, causes the unit to be susceptible to overheating when the vehicle is parked and the block heater is plugged in –increasing the risk of an underhood fire. Ford is aware of two reports of underhood fires in Canada, but is not aware of any accidents or injuries related to this issue. Affected vehicles include certain 2015-2016 Lincoln MKC vehicles built at Louisville Assembly Plant, Nov. 25, 2013 through Jan. 25, 2016 and certain 2016 Ford Explorer vehicles built at Chicago Assembly Plant, Oct. 20, 2014 through Jan. 28, 2016. There are 5,536 vehicles affected by the issue, including 3,129 2015-2016 Lincoln MKC and 2,407 2016 Ford Explorer vehicles, with 1,543 of the affected vehicles in the United States and federalized territories and 3,993 in Canada. Dealers will remove and replace the engine block heater with an updated design and, if needed, replace the cord at no cost to the customer.