1967 Ford Mustang Gta S-code 390 Coupe Auto With Disc Brakes on 2040-cars

Auto blog

2016 Ford Shelby GT350 Mustang rated at 526 hp, 429 lb-ft

When Ford debuted the Shelby GT350 Mustang at the LA Auto Show last year, we were told it'd have more than 500 horsepower and over 400 pound-feet of torque. And indeed it does; Ford confirmed today that its hot 'Stang will make 526 hp at 7,500 rpm and 429 lb-ft at 4,750 rpm. Compared to the GT350's main rival, the Chevy Camaro Z/28, that's an increase of 21 hp, but a loss of 52 lb-ft. That said, this Mustang packs some serious prowess, especially in its most hardcore GT350R trim. It sounds pretty wicked, too. It's worth noting that both the standard GT350 and GT350R use the same engine, with the same output ratings. It's also worth noting that this is a flat-plane-crank engine. It's the most powerful naturally aspirated engine Ford has ever made, with 102 hp per liter. Redline is 8,250 rpm. It's a lightweight engine, too – the 5.2-liter mill weighs less than Ford's own 5.0-liter Coyote V8. Perhaps most impressive is the price point for the 2016 Shelby GT350. The standard car comes in at $47,870, while the GT350R will command $61,370 – a big drop over the Camaro Z/28 and it's $73,300 sticker price (including destination but not gas guzzler charges). Ford confirmed the power output news at a media briefing today near its headquarters in Dearborn, MI. Stay tuned for more information as it becomes available. Related Video:

Ford recalls nearly 200,000 Expeditions and Navigators for fire risk

Ford is recalling 2015-2017 Expeditions and 2015-2017 Lincoln Navigators because the front blower motor could fail and cause a fire. In total, 198,482 Expeditions and Navigators will be recalled. In the official recall documents posted by NHTSA, Ford says that it “has not identified the cause of this condition.” However, Ford also says it is currently aware of 25 fire allegations related to the blower motors on these vehicles. Despite not strictly identifying the cause of blower motor fires, Ford put forth a theory in its fieldwork analysis of the issue.  “In June 2022, based on component analysis, Ford Engineering theorized that a mispositioned blower motor brush holder spring could cause an internal short or localized heating of the brush spring or holder. It is believed that when a fire initiates on the blower motor, it does so at the positive brush holder location. The variable blower controller would remain operational and there would be no signs of an overheated relay. Field data indicates that this concern typically occurs at a higher time in service, and on vehicles with higher mileage.” Since the blower motor is located on the passenger side interior behind the glovebox, the fires that start are interior fires. Ford isnÂ’t aware of any accidents related to this issue, but there is one claim of burnt hands and fingers as a result of a fire. According to Ford, warning signs of an impending fire or failed blower motor include an inoperative fan, burning smell and/or smoke from the instrument panel vents while the vehicle is on. To remedy this situation, Ford is recalling the affected SUVs and replacing the blower motor assembly with a revised part. The new part uses a blower motor assembly design utilized on other applications. If folks with these SUVs experience any symptoms of blower motor failure before the new part becomes available, Ford says they can take their vehicle to the dealer to have it replaced with a part of the same design. Once the redesigned part becomes available, the dealer will then swap it in. Owner notification letters are expected to begin on September 12 this year. Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

2015 Ford F-150 enters production

Ford has given the F-150 a dramatic makeover for 2015, switching to an aluminum body that helps reduce weight by about 700 pounds. Because the truck is dramatically different, Ford also had to change the way it makes the F-150, so we went inside its sprawling factory in Dearborn, MI, this week to see the Blue Oval's new manufacturing techniques in action.
The company has added 850 jobs at the site and upgraded its stamping and tool and die facilities. The body shop is also modernized, and it has been fitted with 500 new robots that join the structures together. The first 2015 F-150 rolled off the line on Tuesday, and the trucks will begin arriving in dealerships in December. Get a closer look at the F-150's unique assembly process in our video.