1930 Ford Model A ** A True Barn Find** on 2040-cars

Auto blog

2014 Ford F-150 gets CNG option

Ford is toiling away, installing heavy-duty engine components into select 3.7-liter V6s to allow them to run on compressed natural gas (CNG) and liquid petroleum gas (LPG) in addition to gasoline. That's nothing new, but now, Ford has announced that it will offer the 2014 F-150 with this engine configuration, bringing the Blue Oval's total number of CNG/LPG-friendly vehicles up to eight. The F-150 will be the only half-ton pickup on the market that can run on these gases.
Ford will charge $315 per vehicle to equip the optional engine, but the trucks won't be ready to run on the alternative fuels straight from the factory and must be upfitted with additional equipment. A Ford Qualified Vehicle Modifier will install a separate fuel system for the compressed gases at a cost of $7,500 to $9,500, depending on fuel tank size. With the right-size tank, the F-150 equipped with the CNG/LPG-prepped engine can go 750 miles on one tank of gas, according to Ford, averaging 23 miles per gallon.
The practice of offering flex-fuel vehicles is gaining momentum as businesses take advantage of cheap gas. CNG can be bought for $2.11/gallon on average (per gasoline equivalent), and sometimes for as little as $1.00 in some parts of the US, Ford states. "With the money saved using CNG, customers could start to see payback on their investment in as little as 24 to 36 months," says Jon Coleman, Ford's fleet sustainability and technology manager. The automaker expects to sell a total of 15,000 CNG/LPG-prepped vehicles in the 2014 model year.

Ford recalls 90,736 vehicles due to engine valve issue

Ford will recall 90,736 vehicles as engine intake valves in the vehicles may break while driving, the National Highway Traffic Safety Administration (NHTSA) said on Saturday. The recall impacts certain 2021-2022 Bronco, F-150, Edge, Explorer, Lincoln Nautilus, and Lincoln Aviator vehicles equipped with either a 2.7L or 3.0L Nano EcoBoost engine, the NHTSA said. According to documents posted by NHTSA and sourced from the automaker, "The engine intake valves may break while driving, which can result in engine failure and a loss of drive power." Following an investigation that started in January, 2022, Ford found 22 instances where "the engine intake valves fractured and fell into the combustion chamber of the engine causing catastrophic engine damage." The automaker's analysis continues: "Ford identified that the potential root cause of the failures was engine intake valve failure due to valves that exceeded the designed specification for hardness, were brittle, and more likely to fracture. Ford determined that this was due to the supplier’s grinding processes and the sensitivity of the intake valve material to grinding processes that were not within control specifications. The intake valve material was changed for vehicles produced after October 31, 2021." Fixing the problem will require replacement of the entire engine. "Dealers will inspect each vehicle to determine its cumulative number of engine cycles. For vehicles that do not meet the engine cycle threshold, dealers will accumulate high revolutions per minute (rpm) engine cycles per a service procedure. Engines will be replaced on vehicles that do not pass the engine cycle accumulation," Ford says.

2016 Ford Shelby Mustang GT350R First Ride

Ford Performance Chief Engineer Jamal Hameedi was in China when he received an interesting text. Half a world away his team was shaking down the newest Shelby Mustang at Grattan Raceway in rural Michigan. The news was encouraging. The GT350R was keeping pace with a Porsche 911 GT3, even nosing ahead of it during time trials, while the GT350 was running about even with a 911 Carrera S and a Chevy Corvette Stingray. "That was a good text to get," he recounted a week later as we chatted alongside the track at Grattan. On this scorching summer day, there were no Porsches or Stingrays to be found, but we've come to preview the track-focused GT350R. Ford drivers are at the wheel, and we're riding shotgun. After several hot laps, we're left with a predictable observation: The GT350R is wicked fast and quick as hell. Much of this is thanks to the 5.2-liter flat-plane crank V8 that pumps out 526 horsepower and 429 pound-feet of torque. It's the most powerful naturally aspirated road-legal engine in Ford's 112-year history. To help the engineering process, Ford bought a Ferrari 458 Italia and ripped apart its V8. The GT350's engine ended up being 10 pounds lighter. For the coup d'grace, Ford's mill also revs to a Ferrari-like 8,250 rpm. As formidable as all of that looks on paper, it sounds even more imposing in real life (see the related video below). The engine in our GT350R crackles, growls, and opens up to a flat-out roar as we explode onto the track, gripping the door pulls to calm our nerves. Grattan is a challenging, twisty course. The corners are tight, and the elevation changes quickly. At one point, our test driver aggressively tackles a curve and we're briefly airborne. During the first stint, we reach about 140 miles per hour. But the GT350R isn't about straight-line speed or pure power. It's designed to get around a track as rapidly as possible. That means Ford took the 'base' GT350 – which should be more than at home on the track itself – and re-tuned the suspension and aerodynamics. There's a larger front splitter and rear carbon-fiber spoiler. The 19-inch carbon-fiber wheels are stiffer and lighter than comparable aluminum rollers, and they're wrapped in Michelin Pilot Sport Cup 2 high performance rubber. Additionally, Ford ripped out the back seats, air conditioning, trunk floorboard, stereo, backup camera, and anything else that wasn't necessary.