1930 Ford Model A on 2040-cars

Auto blog

2015 Ford Mustang already under recall, but just 53 units

Ford has issued a small - but significant - recall for one of its spotlight cars: the 2015 Mustang.
The recall affects just 53 cars, with 50 in the United States and three in Canada. Ford said the passenger side safety belt buckle tension sensor may not have been calibrated properly by the supplier. This could lead to "misclassification" of the passenger seat occupant, and could cause the airbag to deploy improperly.
A Ford spokesperson didn't immediately respond to a request for comment. In a statement, the automaker said it is not aware of any accidents or injuries, and dealers will replace the buckle assembly at no cost to customers. The cars affected were built at Flat Rock Assembly Plant in Michigan from Aug. 18 to Oct. 2.

2020 Ford Explorer, Lincoln Aviator reportedly facing numerous QC issues

A lengthy report in the Detroit Free Press delves into a range of quality control issues confronting the 2020 Ford Explorer and its luxury platform sibling, the 2020 Lincoln Aviator. Freep says it's been following the issue for two months, tapping various unnamed sources for information on the automaker's unorthodox route to resolution. Seems the problem is Explorers and Aviators leaving the production line at the Chicago Assembly Plant with flaws in areas like the chassis, transmission and suspension, said vehicles trucked to Ford's Flat Rock Assembly Plant (FRAP) outside of Detroit for repair. The estimates range from 10,000 to 18,000 vehicles affected, numbers so high that Ford has sought help from Roush Engineering in nearby Allen Park, and brought workers and managers from other plants in the Midwest to FRAP to get vehicles repaired and shipped to dealers. Ford hasn't shared the nature of the problems with anyone outside the company, including dealers and customers. Freep's sources are said to include workers who have provided photos of certain vehicles and of tents used to house parts at the FRAP repair site. The Explorer chassis allegedly has an unidentified problem that engineers are using X-rays to diagnose, and the transmission is having problems sensing when it's in park or going into park. Both the Explorer and Aviator have come off the line with HVAC units that only blow hot air. And the Aviator's height-adjustable suspension enters failure mode for unknown reasons. These come on top of quotidian mishaps common to every new vehicle, but that are meant to be sorted in pre-production, like missing emblems and trim pieces. They also come on top of a recall in early August issued for the Explorer and Aviator concerning the instrument cluster and parking brake, and another at the end of August over rear seatbacks that could collapse in a crash. An automaker spokesperson told Freep, "Making updates to preproduction models based on all-new platforms as they roll off the assembly line – is standard industry practice." Except these aren't pre-production, these are early production vehicles that paying customers and dealers are waiting for, and some of the affected vehicles have been pulled off dealer lots. Dealers say they are fine waiting for the trucks to get sorted out, and they'd rather have Ford fix the problems before the SUVs go to customers.

Bodie Stroud seriously updates the 1956 Ford F-100 into the BSI X-100

If you thought pickups could use a lot more love in the resto-mod world, then Bodie Stroud – he of "The Real Thing" Mustang – has something for you: the BSI X-100. His team starts with the body of a 1956 Ford F-100, but the sheetmetal is about all the nostalgia you're going to get; the body, tweaked with a chopped hood and a larger rear window on the cab, sits on a custom steel ladder-frame chassis. Out back is a one-piece, tubbed bed, and behind that are taillights from a 1948 (gasp!) Chevrolet. Under that hood is either a 412-horsepower, 5.0-liter Ford Racing Coyote crate engine, or a supercharged, 6.0-liter, 630-hp Ford Racing Aluminator motor, shifting through a Ford 4R70W four-speed automatic. Inside, the dash is reworked to fit gauges from a Ford F-150 King Ranch Edition, and the bench is swapped out for buckets from a Mustang GT. The independent front and four-link rear suspension are adjustable, helping to make room for staggered wheels - 19 inches in front, 20 inches in back, and larger can be accommodated. Six-piston Wilwood brakes handle the stopping. There's a lot of fabrication and hand-work involved, and it doesn't come cheap: BSI says the turnkey package starts at $180,000. If you've got it, this is an exceptional way to flaunt it. The press release below has all the details. THE BSI 1956 X-100: TIMELESS LINES, MODERN TECH New pickup from Bodie Stroud Industries melds the iconic style of the 1956 F-100 with a cutting-edge chassis and drivetrain to create a hand-built, all-new truck with the performance and reliability of a modern sports car. Sun Valley, Calif. (March, 2015) – In an era when anyone can walk into a dealership with good credit and a yearning to go fast and drive out in a 500+ horsepower sports car, owning and driving something truly unique has become a challenge. With that in mind, the craftsmen at Los Angeles-based Bodie Stroud Industries (BSI) have come up with something truly special – a brand new line of hand-built, turn-key pickups with the looks and sheet metal of an American icon, subtly massaged and fitted to a modern chassis and powered by the latest engine, transmission and electronics from Detroit. The result is the world's first all-new, turn-key 1956 Pickup: the BSI X-100. "When most people think about classic trucks, what comes to mind is usually the 1956 F-100, it's one of the most timeless designs of all time," says BSI founder Bodie Stroud.