1968 Ford Xl Fast Back on 2040-cars

Auto blog

Ford dealers offered discounts on tools to fix aluminum

With the introduction of the aluminum-bodied 2015 Ford F-150 (and the likely use of aluminum in future Ford products), Ford is looking to help its dealerships reduce costs related to repairing this more labor-intensive material. Automotive News is reporting that Ford dealers with body shops will require an estimated $30,000 to $50,000 in equipment and training to work on aluminum, and to help alleviate the financial burden of the new F-150, Ford has announced a special 20-percent discount on this equipment.
Dealers will be able to save up to $10,000 on tools such as welders, air-filtration systems and rivet guns and to create aluminum-specific work stations. The new F-150 goes on sale in the fourth quarter, and dealers have until October 31 to take advantage of this deal, according to the report.

NHTSA closes Ford F-150 EcoBoost acceleration probe

Typically when we report on the findings of an investigation from the National Highway Traffic Safety Administration, it's because the government body has discovered a safety issue and prescribed a recall. In this case, however, NHTSA has closed an investigation into a reported performance deficit without ever getting to the recall stage.
The issue revolves around the Ford F-150 - specifically those equipped with the 3.5-liter EcoBoost engine - of which some 360,000 were built in the 2011, 2012 and 2013 model years. After receiving an initial 95 complaints, NHTSA opened an investigation last May - almost a year ago - into the reported issue of reduced engine power under hard acceleration. The agency has since received a total of 525 such complaints, and Ford itself reported receiving over 4,000.
Together, NHTSA and Ford determined that the problem resulted from cylinders misfiring, an issue itself stemming from water getting into the charge air cooler (CAC) mated to the turbochargers. In particularly humid or rainy conditions, water was found to get into the CAC, causing some of the cylinders to misfire, which in turn triggered the ECU to disable those cylinders in order to protect the catalytic converter from damage.

1994 McLaren F1 LM-Specification fetches $19.8M at Monterey

The botched sale of that World War II-era 1939 Porsche Type 64 may have somewhat overshadowed the RM Sotheby’s auction last weekend at Monterey, but the event wasnÂ’t without its highlights. Exhibit A: The one-of-two 1994 McLaren F1 LM-Specification supercar that we told you about a month ago netted a whopping $19.8 million at the RM SothebyÂ’s auction last weekend in Monterey, and an almost equally rare 1965 Ford GT40 Roadster Prototype also netted seven figures.  The F1 is one of 106 examples ever built and one of just two in LM-Specification (the LM stands for “Le Mans”). McLaren upgraded the standard F1 at the factory post-production, adding a 680-horsepower GTR engine, an extra-high downforce coachwork kit highlighted by the massive rear wing, race-spec dampers, two more radiators and so forth. It also gained a more comfortable interior and creature comforts, with an upgraded air conditioning, radio, new headlights and a different steering wheel. Finally, the exterior was given a coat of silver paint, replacing the factory blue. Four bidders spent four-and-a-half minutes trying to outbid one another for the car, which eventually went to an unidentified American private collector. Also successfully auctioned on Friday: the 1965 Ford GT40 Roadster Prototype for $7.65 million, which fell right in line with expectations of between $7 million and $9 million. It helped pave the way for the Mark IV race cars that won the 24 Hours of Le Mans. As a reminder, it was the first of five GT40 Roadster Prototypes ever built, with seven hardtop versions also built, and it underwent a full restoration in 1983 and a mechanical overhaul in 2003. And it sure is pretty to look at.