2014 Ford Focus S on 2040-cars

Auto blog

Ford Mustang Mach-E fails Sweden's moose test

The infamous moose test has claimed another casualty. This time it's the Ford Mustang Mach-E AWD Long Range, which was tested in an electric four-way alongside the Tesla Model Y, Hyundai Ioniq 5 and Skoda Enyaq iV (an electric utility vehicle closely related to the Volkswagen ID.4 that is sold in the United States). According to the Swedish testers at Teknikens Varld, Ford's electric car not only failed to hit the speed necessary for a passing grade, it didn't perform well at slower speeds, either. To pass the outlet's moose test, a car has to complete a rapid left-right-straight S-shaped pattern marked by cones at a speed of at least 72 km/h (44.7 miles per hour). The test is designed to mimic the type of avoidance maneuver a driver would have to take in order to avoid hitting something that wandered into the road, which in Sweden may be a moose but could just as easily be a deer or some other member of the animal kingdom elsewhere in the world, or possibly a child or car backing into the motorway. Not only is the maneuver very aggressive, it's also performed with weights belted into each seat and more weight added to the cargo area to hit the vehicle's maximum allowable carrying capacity. The Mustang Mach-E only managed to complete the moose test at 68 km/h (42.3 mph), well below the passing-grade threshold. Even at much lower speeds, Teknikens Varld says the Mach-E (which boasts the highest carrying capacity and was therefore loaded with more weight than the rest of the vehicles tested in this quartet) is "too soft in the chassis" and suffers from "too slow steering." Proving that it is indeed possible to pass the test, the Hyundai and Skoda completed the maneuver at the 44.7-mph figure required for a passing grade and the Tesla did it at 46.6 mph, albeit with less weight in the cargo area. It's not clear whether other versions of the Mustang Mach-E would pass the test. It's also unknown if Ford will make any changes to its chassis tuning or electronic stability control software, as some other automakers have done after a poor performance from Teknikens Varld, to improve its performance in the moose test. Related video:

Ford and BraunAbility team up for wheelchair-accessible Explorer

BraunAbility, a creator of wheelchair-accessible vehicles that are usually based on minivans, has teamed up with Ford to create the MXV, a vehicle the company hails as the first of its kind. In addition to the obvious exterior modifications that include sliding doors, this Explorer-based mobility vehicle has removable driver and passenger seats and a powered ramp that nestles into the vehicle's floor. Modifications to the regular Explorer platform will allow wheelchair users to operate the MXV from the driver's position with the normal seat removed, ride along as a front passenger, or enjoy 56 inches of cabin height in the middle row, which is large enough to accommodate most power wheelchairs. Best we can tell, there are no changes to the Explorer's powertrain, which means a 3.5-liter V6 engine with 290 horsepower and 255 pound-feet of torque will provide motivation, not to mention 5,000-pounds worth of towing capacity. Fuel economy from the MXV matches that of the Explorer, with 17 city, 24 highway, and 20 combined. The twin-turbo EcoBoost V6 isn't available. Unfortunately, all-wheel drive also isn't available from BraunAbility due to the lowered floor necessary to make the vehicle large enough to work as a proper mobility vehicle. Even so, the Explorer looks like a pretty nice platform with which to build such a wheelchair-accessible vehicle, with good looks, good driving manners, and the kind of rugged looks you can't find in a minivan. Expect to see the MXV at BraunAbility dealers this fall, but don't expect to be first in line. Vehicle No. 1 has been promised to wounded veteran Mike Delancey, a United States Marine paralyzed by a sniper's bullet while serving in Iraq in 2006. Take a look at the images above, and feel free to peruse the press release for all the details below. Related Video: BraunAbility – the World Leader in Mobility Vehicles – Selects Ford Explorer to Create First-Ever Wheelchair-Accessible SUV • BraunAbility introduces its first-ever wheelchair-accessible sport utility vehicle – the BraunAbility MXV™ • BraunAbility-customized Ford Explorer – the best-selling SUV in the U.S. for the last 25 years – will be the company's first mass-produced wheelchair-accessible SUV • BraunAbility revolutionized what independence means to wheelchair users, and has established itself as a world leader in the mobility business DEARBORN, Mich.

70% of pickups could use aluminum by 2025

In the next decade, the auto industry will see an explosion in its use of aluminum to cut weight and increase fuel economy, according to a study from market analysts Ducker Worldwide cited by The Detroit News. We are already seeing the lightweight metal show up extensively in luxury models from Europe, but with the impending launch of aluminum-intensive 2015 Ford F-150 (pictured above), North America is using it even more, as well. The report predicts 70 percent of US pickups to have aluminum bodies by 2025.
It won't just be pickups that see the benefit, though. The average amount of aluminum in US vehicles is forecasted by the study to grow from an average of 350 pounds in 2013 to about 550 pounds by 2025. The most common parts to use it will be hoods, doors and - to some extent - roofs, as well.
The massive increase in pickups' aluminum content hardly seems surprising. The F-150 is predicted to use so much that it might cause a short-term shortage, according to one earlier report. At the same time General Motors is heavily rumored to be negotiating with suppliers for the next generation Chevrolet Silverado and GMC Sierra. Ram is the last holdout of the Big Three, but the study predicts that not to last.