2002 Ford Focus Se Sedan 4-door 2.0l on 2040-cars

Auto blog

NHTSA opens investigation into Ford Explorer PI brakes

This year more than most, it's pleasant when we can string together a few days without word of an automaker or the National Highway Traffic Safety Administration announcing a bunch of new recalls. It's seemingly been a little quiet on this front lately (barring a spider-related Suzuki issue revealed early today), but now we have word of the government safety agency opening a Preliminary Evaluation into the 2013 Ford Explorer Police Interceptor, a probe that could potentially affect an estimated 20,000 vehicles.
The issue being investigated concerns failures of the front brake hose on the vehicle that show "small splits in the hoses near the body side ferrule of the hose assembly," according to the agency, and the issue could result in longer stopping distances. The feds have reports of 13 malfunctions affecting 11 Explorer units. However, it's important to note that all of the incidents come from a single, unnamed metropolitan police fleet that operates 46 of them. According to The Detroit News, the failures generally took place between December and July.
NHTSA is investigating further to find if this is a more widespread issue than just this one fleet. Ford spokesperson Kelli Felker confirmed to us, "We are cooperating with NHTSA on this investigation, as we always do." Scroll down to read the agency's report.

2015 Ford F-Series Super Duty is class-leading once again

Time for everyone to feign surprise - Ford has just announced that it has the increased horsepower and torque levels of its 6.7-liter Power Stroke turbodiesel V8 engine for 2015. As you'd expect, the Blue Oval is claiming class-leading figures of 440 hp (up from 400) and 860 pound-feet (up from 800), and that's enough to enable Ford's F-450 Super Duty model to tow as much as 31,200 pounds, which, again, the automaker claims is class leading.
Now, it should be noted that the max rating quoted above is achieved with the Ford F-450. The 2015 F-350, which is perhaps a better comparison to the Ram 3500 HD pickup that claimed the towing crown in 2013 at an even 30,000 pounds, is capped at 26,500 pounds, either with a gooseneck or when towing a fifth-wheel trailer. In any case, it's going to take a load the size of Godzilla to make any of the current crop of fullsize heavy-duty pickup trucks break into a sweat. For those keeping track, Chevy rates its 2015 Silverado HD at a maximum of 23,200 pounds.
Ford's newfound pulling power comes courtesy of a larger turbocharger for its in-house Power Stroke engine, new fuel injector tips and, we'd assume, retuned computer controls. Besides the engine enhancements, the F-350 gets a wider front track for 2015 and new front springs, while the F-450 gains commercial-grade 19.5-inch wheels and tires, new rear U-joints, leaf springs, stabilizer bars and shocks. The steering and brake systems have also been upgraded.

Ford will put solid axles under the Bronco as the off-roading gods intended

We've been wondering what sort of creature the Bronco would be since we first heard of the thing last October, when a union chairman spilled the beans on the SUV and the Ranger pickup. Ford confirmed a 2020 arrival date for the Bronco at the 2017 Detroit Auto Show, but at that point pretty much all we were sure of was that the Ranger and Bronco would be returning. The open question would be how hungry Ford was to spoil the Jeep Wrangler's solo party as a compact(ish) off-roader with dual solid axles, since the easiest thing would be to carry over the suspension design of the presumably related international Ford Ranger and its Everest SUV version: independent front suspension with either a leaf- (Ranger) or coil-suspended (Everest) solid rear axle. Enter Dana, the long-time supplier of Jeep stick axles, to confirm that the 2020 Bronco is getting a pair of them. That means solid axles front and rear, just like under a Wrangler. So reports Automotive News, citing an investor presentation from Dana. All signs so far, such as the report that the Bronco would be engineered by the same team in Australia that created the Ranger pickup, indicated that the Bronco would share a platform with the Ranger and thus be body-on-frame. The solid axle confirmation essentially confirms that theory. Some off-road-capable vehicles have paired solid axles with unibody frames, like the Jeep Cherokee (XJ generation) and Grand Cherokee (ZJ and WJ generations), but they are outliers. Generally, if you've got solid axles at both ends, they're going in a vehicle with a ladder frame. It also lends credence to the notion that our Bronco won't simply be an imported Everest, which might be too understated to stand out from lesser crossovers anyways. This is good news if you have Blue Oval in your blood and pine for a modern SUV that'll show up the Jeep guys on the trail. Less directly, it could mean a wholesale assault on the formula that makes Jeeps successful in the first place: the massive aftermarket of off-roading equipment and dress-up bits that appeal to Jeep buyers almost as much as a Trail Rated badge. At a minimum, Bronco enthusiasts can breathe easy that the reborn SUV won't merely be a light-duty crossover with styling "inspired" by true off-roaders. There's still a lot left to learn about the Bronco. Keep up to date with our running summary of everything we know about the returning off-roader.