2014 Ford Fiesta Se Hatchback 4-door 1.6l on 2040-cars

Auto blog

2021 Ford Raptor vs Ram TRX Specs Compared

Hopefully by now you've had a chance to read our thorough 2021 Ford F-150 Raptor review. If not, check it out, 'cause you'll find a lot more detail and expertise than normal (for Autoblog or anywhere) thanks to Dan Edmunds' vast engineering and off-roading background. If you want all the dirt on the Raptor, pun intended, that's where to turn. If you just want to gaze at the specs, however, and wonder how they compare to the old Raptor or to the Ram TRX, check out the chart below. There you will find dimensions, clearances, angles, weights, capacities, engine output and fuel economy for the 2021 Raptor with both 35-inch and 37-inch tires. As Dan explains in his first drive, there's actually more going on there than just tire sizes. You'll find the same specs for the outgoing second-generation Raptor plus the 2021 Ram 1500 TRX and the less extreme Ram Rebel trim level in the chart, too.  Other reviews and deep dives about the F-150 and TRX 2021 Ram 1500 TRX First Drive Review Our review of the Raptor's chief competitor, the mighty TRX. That just sounds like we're talking about Jurassic Park.    2021 Ram TRX Suspension Deep Dive and RTI ramp test Follow along with engineer Dan Edmunds as he takes you under the TRX and explains everything there is to know about its suspension -- and how it's able to do what it does.    2021 Ford F-150 Full-Line Review   2021 Ford F-150 Suspension Deep Dive It's a totally different F-150 flavor to be sure, but even the volume-selling XLT received a lot of work for 2021. Dan Edmunds takes you underneath the truck to show you what's different and what difference it makes.    Photo Galleries of Each Truck 2021 Ford F-150 Raptor 2021 Ford F-150 Raptor View 16 Photos   2021 Ram 1500 TRX 2021 Ram 1500 TRX front 3/4 in motion View 53 Photos   Ram 1500 Rebel 2019 Ram 1500 Rebel View 42 Photos   Second-Generation Ford Raptor 2019 Ford F-150 Raptor View 37 Photos

2017 Ford GT spied in the raw

The Ford GT supercar is finally going outside to play, and it has been captured for the first time prowling the streets near Ford's compound in Dearborn, MI. Due in late 2016, the GT has been one of Ford's most closely guarded projects and was developed under a veil of secrecy. The prototype revealed at the Detroit Auto Show stunned enthusiasts, and these shots illustrate that it's making the leap to production reality. As our spy shooter wryly notes, the mule captured in these photographs looks like a Mad Max prop. It's colorless, is missing key body parts – note the ringless taillights and lack of a rear bumper or diffuser. It also looks to be even lower to the ground than the concept from the Detroit show. It appears to have different mirrors and windshield wipers. The lack of some body panels also calls out the exhaust pipes, which look like tail guns in these shots. Otherwise, this test car looks just like the auto show star, and sans paint it manages to appear even more sinister. Though these spy shots indicate the GT is on track for production, Ford has been pretty up front about what the car will be when it arrives in showrooms. We know it will have a twin-turbo EcoBoost V6 paired with a seven-speed dual-clutch gearbox. It will make extensive use of carbon fiber and feature a driver-oriented, contemporary-styled interior. Canadian company Multimatic will build the GT. The Le Mans-inspired supercar is the standard-bearer for Ford's renewed performance push. The automaker plans to roll out at least 12 sporting cars by 2020 as it looks to lure new buyers to its fold. Ford also using developments from these high-end cars to improve its lineup, and will it spread aerodynamics and materials technologies across its portfolio. "It's another proof point about how serious we are in developing innovation through performance," Ford product chief Raj Nair has said. Related Video: Featured Gallery 2017 Ford GT Spy Photos View 25 Photos Related Gallery Ford GT Concept: Detroit 2015 View 45 Photos Image Credit: Chris Doane Automotive Motorsports Ford Coupe Performance Supercars

Ford invests $682 million in Edge-producing Canadian facility

Ford announced that it's investing $682 million in its Oakville assembly plant in Ontario, Canada, to make it a global manufacturing plant, which the automaker also says secures 2,800 jobs there. Including this injection of cash, Ford has invested over $2 billion in Canada in the last decade, starting with nearly $1 billion for Oakville in 2004, and over $570 million for its Essex Engine Plant in 2010.
The move to make Oakville a global manufacturer of Ford vehicles means, "If consumers suddenly shift their buying habits, we can seamlessly change our production mix without having to idle a plant," says Joe Hinrichs, Ford's president of the Americas.
Ford says that the latest investment will help it meet North American demand for the Oakville-produced Edge crossover, which is on track this year to beat 2007's US sales record of 130,000 Edges. The Ford Flex and Lincoln MKX and MKT are also manufactured at the plant.