Auto blog

Ford issues recalls for Fiesta, Fusion, E-Series, and Lincoln MKZ

Ford has issued two new safety recalls for North America. The first covers certain 2014-15 Ford Fiestas, 2014-16 Ford Fusions, and 2014-16 Lincoln MKZs with doors that might not close properly. The second pertains to 2021 Ford E-Series stripped chassis and cutaway vehicles with a wiring harness that might chaffe and expose important wiring.    Ford is recalling 268,343 Fiesta hatchbacks, Fusion sedans, and MKZ sedans across the United States, Canada, and Mexico, with 248,912 of the affected vehicles located in the U.S. The recall says the "latch pawl spring-tab design" could crack in locations where the temperature gets too hot. If the tab breaks, the door might not shut. Or, worse, the door will shut temporarily and reopen once the vehicle is in motion. As a fix, Ford dealers will remove and replace the side door latches. In a separate recall, Ford is targeting 3,631 2021 E-Series stripped chassis and cutaway vehicles. These vehicles could have frame-mounted wiring harnesses that could deteriorate and break due to rubbing on the frame. If the chaffing wears down the harness, wiring for the fuel, trailer tow, and antilock braking systems could be exposed and damaged. In the worst-case scenario, the damage to the fuel pump wiring could cause the pump to stop working, which could stall the vehicle.  Those with affected E-Series vehicles should bring them in to dealerships for inspection. If there is no damage, technicians will add anti-abrasion tape over the area and "ensure clearance to surrounding components." If the harness is damaged, the wiring will be spliced and fixed, then anti-abrasion tape will be added. Ford also issued a third recall, but it is specifically for the Canadian market. On 54,292 examples of 2006-10 Ford Fusions, 2006-10 Mercury Milans, and 2006-10 Lincoln MKZs, a valve inside the hydraulic control unit might stick open. According to Ford, this could result in a longer brake pedal travel, which could possibly create dangerous situations if the driver is unaware. Dealerships will inspect the control units and replace those that are defective. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. 2021 Ford Bronco and Bronco Sport Leaks!!

2018 Jeep Grand Cherokee vs. midsize crossovers and SUVs: How they compare on paper

In a world full of SUVs and crossovers all competing for similar buyers in similar segments, there are still some models that find their own little niches that lack such fevered fighting. The Jeep Grand Cherokee is one of those vehicles. It's an oddball in the sense that it's a midsize crossover SUV with a unibody chassis and independent suspension, but it still uses rear-wheel-drive and four-wheel-drive systems and has some off-road capability. It's also a midsize crossover, but only offers two rows of seats. Despite the Grand Cherokee's odd nature, we did come up with a few crossovers and a classic SUV that seem to match the Jeep in size and pricing. We looked at the numbers to compare them on paper. You can find the raw data in the chart below and deeper analysis after that. As always, this is just a comparison of specifications and you'll want to check out our driving impressions of each car if you're getting serious about one or all of these vehicles. And if you want to compare any of these against other vehicles, be sure to check out our comparison tool. Engines and Drivetrains When comparing base engines, the Jeep Grand Cherokee's 295-horsepower is the clear power winner, beating the next most powerful 4Runner by 25. But in torque, the 4Runner takes the laurels with 278 pound-feet, narrowly edging out the Edge's (no pun intended) turbocharged 2.0-liter four-cylinder's 275. That four-cylinder in the Edge will also be picking up another 5 horsepower for 2019, but it still won't win this power contest. Both Ford and Jeep also have another advantage in the fact that you don't have to settle for the base powertrain. Ford has two other engine options, a naturally aspirated V6 and a twin-turbocharged V6, the latter of which outguns the Grand Cherokee's gasoline V6 in both power and torque. That engine will also be bumped up to an impressive 335 horsepower and 385 pound-feet of torque. View 20 Photos The Jeep has the most engine options, though, and it's the only to offer V8 and diesel options. On most Grand Cherokees, the options include a 5.7-liter V8, which is only available with 4WD. It makes 360 horsepower and 390 pound-feet of torque, outperforming even the 2019 Edge's twin-turbo V6. The diesel engine doesn't make much power with just 240, but it makes up for it with torque at 420 pound-feet. And of course there are the SRT and SRT Trackhawk models with even bigger and supercharged V8 engines respectively.

Recharge Wrap-up: Daimler spending big for fuel cells, Ford Go!Drive experiment advances

Ford's Go!Drive experiment is entering its beta phase in London. The project, which is one of the automaker's global smart mobility experiments, uses a mobile app for on-demand carsharing of Ford Focus Electric and Ford Fiesta vehicles. The beta phase involves increasing the number of available vehicles from 20 to 50, and collecting new data from users. The program offers one-way rentals and guaranteed parking, with no membership fees and a cost of 26 cents per minute. Ford hopes to get 2,000 drivers involved in the program. Read more at Green Car Congress. Daimler will invest billions of dollars to upgrade the Mercedes-Benz Unterturkheim plant over the next few years. This year alone, it plans to spend $1.06 billion. The company expects cost savings "in the range of hundreds of millions of euros until 2020," while maintaining its workforce of 18,700 employees and adding 150 vocational training positions. The upgrades will allow the plant to become a center for building more efficient engines, hybrid powertrains and fuel cell systems. "Alternative drive systems are an important element of our future mobility," says Mercedes-Benz's Markus Schafer. "Their share of automotive production is set to steadily rise over the next few years, complementing our highly efficient engines within the portfolio. This is what we have laid the groundwork for today." Read more at Reuters, or in the press release below. The Department of Energy is providing $20 million in funding for the development of more efficient high speed industrial motors and drives. Ditching old motors and gearboxes for ones that use integrated power electronics could help decrease the energy consumption of the industrial sector, which currently uses more than 25 percent of the electricity generated in the US. The projects being funded will reduce losses and decrease the size of drive systems used in industries like petroleum refining and natural gas, which could affect the lifecycle efficiency of transportation fuels. Read more at Energy.gov.