1965 Ford Fairlane 500 4.7l on 2040-cars

Auto blog

Want a V8 on the cheap? Buy a work truck

In case you didn't notice, V8 cars have gotten pretty expensive. If you want a modern muscle car like the Dodge Challenger R/T, Ford Mustang GT, or Chevy Camaro SS, you'll need between $34,000 and $38,000 for a stripped out example of one. The cheapest of those is the Challenger, and the priciest is the Camaro. These are also the cheapest V8 cars the companies offer. But if you absolutely have to have a V8 for less, there is an option, work trucks. As it turns out, all of the Big Three offer their most basic work trucks with V8s. And because they're so basic, they're pretty affordable, especially when sticking with the standard two-wheel drive. A Ram 1500 Tradesman with a V8 can be had for as little as $29,840, which is a little more than $4,000 less than a Challenger R/T. For a bit more at $30,275, you can have a Chevy Silverado W/T, almost $8,000 less than a Camaro SS. The most expensive is the V8 Ford F-150 starts at a starting price of $30,670, which is a bit over $5,000 less than the Mustang. Of course you'll be in an ultra bare bones vehicle with few comforts, and the price will go up if you add stuff, but we're bargain hunting here, and sacrifices are sometimes necessary. Besides, what you lose in comfort, you gain in loads of cargo space and towing (try to look at the bright side). Also, as a side note, all three trucks are available with optional electronic locking rear differentials. At the discounted price of these trucks, you still get a heaping helping of power. The most potent of the trio is the Ram 1500 Tradesman with 395 horsepower and 410 pound-feet of torque generated by a 5.7-liter V8. Compared with the Challenger R/T, the Ram is up by 20 horsepower and they're tied for torque. The value proposition is even more stark between the two vehicles when looking at the price per horsepower. Each pony in the Ram costs $75.54, while the Challenger charges you $90.91. The Challenger is also more expensive per horsepower than its close competitors. The F-150's 5.0-liter V8 is just barely behind the Ram with 395 horsepower and 400 pound-feet of torque. That's still more power than the Challenger, and it matches the torque of the 2017 Mustang GT. On the down side, it still would be down 20 horsepower on that same 2017 Mustang, and it's behind by 60 horsepower and 20 pound-feet on the new 2018 Mustang GT. The F-150 also just edges out the Mustang in the dollar per horsepower measure.

Ford E-Series chassis cabs and cutaways to survive mass Transit onslaught

In March 2013, Ford announced we'd be getting chassis cab and cutaway versions of the Transit. Since incoming Transit vans will soon be rolling over the grave of the E-Series van, it was assumed that all E-Series models would go six feet under as well. According to a report from PickupTrucks.com, however, that's not the case, the report claiming that the highly modifiable E-350 and E-450 chassis cab and cutaway versions will continue being produced in Avon Lake, Ohio "at least until 2020."
Being decades old, the be-cabbed E-Series platform has found its way under an army of heavy-duty shuttle buses, work truck and ambulances. Ford spokeswoman Jessica Enoch verified the production horizon, telling Autoblog that the particular E-Series configuration "are a higher GVWR than the Transit chassis cab and cutaway (available this summer), which is more Class 2 and a new segment for us." So there you have it.

2015 Roush Stage 3 Mustang has 670 hp

My last speeding ticket was nearly two years ago while behind the wheel of a 2014 Roush Stage 3 Mustang. Considering the supercharged 5.0-liter V8 produced 575 horsepower – the lowest of the Stage 3's tunes – an encounter with the friendly folks at the Michigan State Police seemed inevitable. With the 2015 Stage 3 producing 95 more horsepower, if and when I drive the new supercharged 'Stang, another meeting with Michigan's finest seems likely. The combination of the Ford 5.0-liter V8 and a 2.3-liter TVS supercharger turns out 670 horsepower, which should have owners of the weightier Dodge Challenger Hellcat at least a bit nervous. All that power is complemented by 545 pound-feet of torque and what is almost certainly an ear-shattering exhaust note from the quad-tip pipes. On top of the RS3's trademark sound and speed, Roush has fitted the sixth-generation Mustang's body with a new "R7" aero kit that actually looks toned down from last year's car. 20-inch "Quicksilver" wheels are standard, although Roush is offering a pair of optional designs. Either way, Cooper RS3 tires are the rubber of choice. Prices for the Roush Stage 3 Mustang start at $21,995, not including the $32,300 starting price of a Mustang GT donor car. Scroll down for the official press release. Related Video: ROUSH Stage 3 Mustang Produces 670 HP May 7, 2015 – PLYMOUTH, MICHIGAN – ROUSH Performance is excited to announce final horsepower ratings for the all-new 2015 ROUSH Stage 3 Mustang. The RS3 is cranking out a heart-racing 670 horsepower and 545 lb-ft of torque to deliver the ultimate driving experience. All 670 horsepower are created as a direct result of the powerful combination of Ford's 5.0L V8 engine with ROUSH Performance's dynamic new 2015 2.3L TVS supercharger. The new ROUSH Mustang's generous power ratings impeccably compliment the RS3's list of standard and optional features, including the ROUSH Quad-Tip exhaust (with optional ROUSH Active Exhaust System), standard single-adjustable coilover suspension system (or optional competition-tuned 3-way adjustable system), and the fierce new "R7" aerobody. The 2015 ROUSH Stage 3 Mustang is not just a car – it's an experience. The RS3 truly bridges the gap between road car and race car, putting drivers behind the wheel of the ultimate uninhibited muscle car.