1997 Ford F350 Crew Cab, 4x4, Xlt, Dually, Gooseneck Hitch, 7.3l Powerstroke on 2040-cars

Auto blog

Lincoln MKC will be renamed the Corsair in 2021, probably

Lincoln will be renaming its MKC crossover, calling it the Corsair instead. Automotive News is reporting that the recently trademarked, yet storied Ford model name Corsair will be affixed on the 2021 model year crossover. The report says Ford has already told its U.S. dealers about the name at an Orlando meeting last month. Ford has a long history with the Corsair nameplate in the States and abroad: Most recently, it has been in use in Australia in the early 1990s, in the UK in the 1960s, and before that Ford offered an Edsel Corsair in the late 1950s. Even if an Edsel connection might not be the best possible thing for a Ford product, let alone a Lincoln, it might serve the crossover well as Ford moves to ditch the MK naming convention it's used for Lincoln for the past decade. Still, the manufacturer is said to have cautioned dealers it might opt out of using the Corsair name before production time. At the same meeting, Ford reportedly showed the next-generation Escape, the Explorer, a battery electric crossover dubbed the Mach 1, a yet-unnamed small SUV (which might be the Bronco) , and a new Lincoln Continental complete with suicide doors. The MKC will still receive a refresh for next year, retaining its letters-name for a couple of years before the bigger redesign for 2021. Currently, the MKC is the strongest-selling Lincoln product in China, and it brings in numerous new Lincoln customers there. In the U.S. it's outsold by the MKX crossover and is neck-and-neck with the MKZ sedan.

NHTSA upgrades Ford floor mat unintended acceleration probe

According to a Bloomberg report, the National Highway Traffic Safety Administration has upgraded an investigation into complaints of unintended acceleration lodged against Ford vehicles. The investigation began in June of 2010 when just three complaints had been received and it only concerned the Ford Fusion and Mercury Milan, but this was at a time when the phrase "unintended acceleration" made grown men go pale. With 49 additional complaints received since then, the investigation has been reclassified as an engineering analysis - the last phase before a recall - and it has been expanded to include the Lincoln MKZ, making for a total of "around 480,000" units affected between the three sedans from the 2008 to 2010 model years.
The ostensible cause is that floor mats are trapping the accelerator pedal, but according to a Ford statement at the time, the entrapment is due to owners placing the optional all-weather floor mats, or aftermarket floor mats, on top of the car's standard floor mats. NHTSA has backed up that assessment, pinning the blame on "unsecured or double stacked floor mats."
On the face of it, it would appear that NHTSA has upgraded the status not because of Ford's error, but owner error, and Ford has stated publicly that it is "disappointed" in NHTSA's move. On top of NHTSA still being skittish after that other unintended acceleration debacle, it could be seen to be taking its time investigating all of the variables: it's reported that Ford changed its accelerator pedal design in 2010, a "heel blocker" in the floorpan has been considered a potential culprit in how the floor mats could be trapping the pedal, some drivers have said the floor mats weren't anywhere near the pedal, and according to a report in the LA Times, in "a letter sent by Ford to NHTSA in August 2010, the automaker said it found three injuries and one fatality that 'may have resulted from the alleged defect.'"

A cool boost to turbocharger performance

Since the advent of the forced-induction engine, we have been looking for ways to get every drop of performance we can. There are many approaches to getting additional power using better intercooling, water injection, or even adding nitrous oxide. One take on a short instant burst of power is being researched by Mahle and involves providing supercooled air to an engine, which allows it to burn a leaner fuel mixture and produce more power. The supercooling idea is not new and was examined by Ford in 1993 on the Mustang Mach III concept car, then brought up again in 2003 with the SVT F-150 Lightning concept. Ford called its system the SuperCooler; it was designed to work with any turbocharged or supercharged engine equipped with a water-to-air intercooler. The system on the Lightning concept used a small tank of antifreeze that was hooked up to the truck air conditioning compressor. The air conditioning compressor cooled the antifreeze down to about 30 degrees. The other side of the tank was hooked up to the air-to-water intercooler, which usually had a temperature over 100 degrees. Once the antifreeze was circulated from the tank into the intercooler, it would lower the intercooler temperature and provide for a cooler, denser air charge into the engine; the result was around 50 extra horsepower for a burst of about 30 seconds to a minute, depending on the size of the tank. The system for the Lightning was to be offered as a $750 option and would have been targeted towards drag racers and the like, as it could be used for a run down the drag strip and then re-cooled by the time the truck was back in line. The system was fairly non-intrusive – it only weighed about 25 pounds and did not require a new compressor or intercooler. But as with many concepts, it was ultimately scrapped. The technology was always stuck in the back of my mind, but with larger and more powerful engines being produced it could not find its place. With the advent of new fuel economy standards, we have seen small-displacement turbocharged engines pop up and they seem like the perfect candidate for this type of technology. Ford's EcoBoost 1.0-liter three-cylinder turbocharged engine, as used in the Fiesta and Focus, is one such candidate for this technology. It would add a negligent amount of weight but could provide a boost of 10 to 20 horsepower when needed, like merging onto the highway or catching up to traffic.